• Development and Reproduction
• /
• v.4 no.2
• /
• pp.147-152
• /
• 2000

Four clonal lines of ayu, Plecoglossus altivelis, were produced through gynogenesis, mixed before hatching and reared communally. After 10 months, a randomly taken sample was subjected to a standardized shallow water stressor. Hematocrit, hemoglobin, red blood cells count (RBC) and mean corpuscular volume (MCV) were obtained from stressed and non-stressed fish. DNA fingerprinting was used to confirm the clonal nature of the organisms and to identified the clonal line to which each fish belonged. 1 observed significant differences between clona] lines mostly in the hematocrit and MCV measured under no-stress conditions. Such differences are suggested to represent mainly genetic variance, on account of the common environment provided to all the experimental groups. The stress response ratio was lower than expected, mainly due to some unexpectedly high non-stress values. Heritability values (h$^2$) were medium to high for the no-stress measurements (mean 0.238) and very low or zero for the stressed groups'traits (excepting one high value of 0.484). 1 conclude that the use of communally reared clonal lines represents a good tool for the characterization of the physiological traits, thus allowing for their utilization as genetic selection criteria.

• Korean journal of applied entomology
• /
• v.24 no.1 s.62
• /
• pp.29-33
• /
• 1985

Every plant in $990m^2$ onion field was inspected for damages by the onion maggot. Maps were constructed every ten days to show which plants were infested and which were not from April 11 to May 21, 1984. The maps were sectioned into squares one of which contains 80 onion plants and the counts of damaged onions in each square were fitted to poisson and negative binomial distribution and tested by chi-square. We argue that the satisfactory fitness of the expected negative binomial $[P(x^2)>0.05]$ provided a useful description of the spatial distribution patterns of the damaged onions. Edge effect was tested by the differences of damage ratio and variance/mean ratio (${\sigma}^2/m$) between edge and center part. The result showed that the damage ratioes and variances of all the periods, ${\sigma}^2/m$ values after May 1 were greater in edge part than in center part. Again, the maps were sectioned into four blocks and the squares (sample units) were sectioned into quadrants. By application of the variance component technique, it was suggested that $2{\sim}8$ sample units for 5% sampling error and $1{\sim}2$ sample units for 10% error should be sampled randomly to estimate the damage ratio when $2{\sim}3$ quadrants were inspected.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.48 no.6
• /
• pp.442-446
• /
• 2003

The Gene action for eight quantitative characters related to the plant type was estimated using diallel cross among three different plant types of sesame (Sesamum indicum L.) in 2001. The parental varieties used for diallel cross were Ahnnam and Yangbaeck as indeterminate type, ksan22 as semi-determinate type, and dt-45 and Suwon131 as determinate type. In variance and covariance analysis (Wr-Vr) for eight characters the mean square of array except for capsule length, 1,000 seed weight were significant, which suggest that varieties involved in diallel set cross may have epitasis. Complete dominance was observed in the flowering periods, and ratio of matured grains while partial dominance was observed in the plant height, no. of capsules per plant, and no. of branch per plant. Broad sense heritability for flowering periods, plant height, no. of capsules per plant, and no. of branch per plant ranged from 0.91 to 0.99. Narrow sense heritability for flowering periods, capsule length, ratio of matured grain, 1,000 seed eight were 0.18 to 0.34, and plant height, no. of capsules per plant and no. of branch per plant were ranged 0.77 to 0.81.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.6
• /
• pp.167-176
• /
• 2005

This paper describes how the state tying model based on the decision tree which is one of Acoustic models used for speech recognition optimizes the model by reducing the number of mixture Gaussians of the output probability distribution. The state tying modeling uses a finite set of questions which is possible to include the phonological knowledge and the likelihood based decision criteria. And the recognition rate can be improved by increasing the number of mixture Gaussians of the output probability distribution. In this paper, we'll reduce the number of mixture Gaussians at the highest point of recognition rate by clustering the Gaussians. Bhattacharyya and Euclidean method will be used for the distance measure needed when clustering. And after calculating the mean and variance between the pair of lowest distance, the new Gaussians are created. The parameters for the new Gaussians are derived from the parameters of the Gaussians from which it is born. Experiments have been performed using the STOCKNAME (1,680) databases. And the test results show that the proposed method using Bhattacharyya distance measure maintains their recognition rate at $97.2\%$ and reduces the ratio of the number of mixture Gaussians by $1.0\%$. And the method using Euclidean distance measure shows that it maintains the recognition rate at $96.9\%$ and reduces the ratio of the number of mixture Gaussians by $1.0\%$. Then the methods can optimize the state tying model.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.1
• /
• pp.20-24
• /
• 2009

Objective: In this study, the differences between two reconstruction methods were analyzed by comparing image uniformity and contrast according to Iteration and Subset, which were altered through the Iterative method and True X method, used in Siemens' PET/CT studies. Methods: The Phantom images were obtained by exposure for two minutes per one bed. To determine the image uniformity, the Coefficient of variance was used. Also, in order to compare the contrast value, we measured and analyzed the ratio of the SUV mean of Phantom image's hot spheres and the background. Results: Under the same reconstruction conditions (Iteration and Subset) of CV, the Iterative method was higher than the True X method. In the comparison of the SUV mean ratio of the background and hot sphere, the True X method had a closer rate than the Iterative method. Conclusion: The newly developed True X reconstruction method is better than the previously used Iterative method in terms of uniformity and contrast. However, the date for this study was only obtained using the Phantom device. In order to obtain more accurate and useful information from the experiment, further research should be conducted. Also, it is necessary to find the appropriate standards for Iteration and Subset for further experimentation.

• The Journal of Engineering Geology
• /
• v.19 no.3
• /
• pp.351-363
• /
• 2009

Two orthogonal joint sets develop well only in sandstone beds in the sandstone-mudstone sequences of Gumi and Dasa outcrops within Cretaceous Gyeongsang Basin. And various joint data are similar in the beds of the same thickness in both outcrops, meaning that the joint sets were homogeneously produced by extensional deformation in the same regional stress field. Most of joints in the sandstone beds are orthogonal to, and confined by bed boundaries, which are believed to be formed by hydrofracturing during consolidation after burial. Two orthogonal joint sets are considered to be almost coeval on the basis of mutual abutting relationship which makes up fracture grid-lock and a product of rapid switching of ${\sigma}_2$ and ${\sigma}_3$ axes with constant ${\sigma}_1$ direction oriented to vertical. The joint sets in the sandstone beds show planar surfaces, parallel orientations and regular spacing, with joint spacing linearly proportional to bed thickness. The spacing distributions of the joints seem to correspond to log-normal to almost normal distribution in most of the beds. But multilayer joints do not display regular spacing and dominant size. Either joint set in this study is characterized by a high level of joint density and a saturated spacing distribution as indicated by the mode/mean ratio values and the Cv(coefficient of variance) values. Joint aperture tends to increase with the vertical length of the joints controlled by bed thickness.

• Journal of Preventive Medicine and Public Health
• /
• v.23 no.3 s.31
• /
• pp.309-315
• /
• 1990

The purpose of this study was to evaluate the effect of zinc administration on the autistic children. The subject diagnosed as infantile autism were 24 male and 10 female children of a special school in Taegu city. Control group were selected from 1:2 ratio matched with cases on sex and age. The results were as followings. In female autistic group, the mean content of zinc in hair was significantly lower than control group, but in male the result was inverse at all age group. The content of zinc in hair showed significant correlation with age in male autistic group and control group. Zinc content of hair, age and sex accounted for 37.2% of the variance of autistic score and the most significant variable was zinc content. Autistic group were divided into two group. Group I which zinc content of hair below 150 ppm were administrated with multi-vitamin contained 10 mg of zinc, Group II which zinc content of hair above 150 ppm were administrated with placebo. Total administration period was eight weeks. In zinc administration group, there was a decreasing tendency of autistic score as the zinc content of hair was increased but the relationship was not statistically significant.

• Journal of Korea Technology Innovation Society
• /
• v.12 no.2
• /
• pp.291-311
• /
• 2009

Intellectual Property(IP) investment and its management are an key driver to create corporate value and intangible asset value through corporate's competitiveness. The purposes of this study are to survey capability of IP management and assess the effects of IP investment and its management on the separation into groups of intangible asset value. In order to attain those purposes of this study, sample companies were taken and categorized into three groups by the level of intangible asset value ratio, and data for IP investment such as R&D expenditure and advertising expenditure were collected from 90 manufacturing companies, and data for IP management capability about patent, design and brand were taken through survey. The final results showed as followed: First, IP management capability were generally not sufficient in the results of survey. Second, mean vector for the four variables were significantly different among three groups in multivariate analysis variance. Third, the order of their contribution to separating the groups were R&D expenditure, advertising expenditure, patent management, management of design and brand in canonical variate analysis. Fourth, R&D and patent management capability were significantly related to the separation of three groups, while advertising expenditure were not significant and management of design and brand were not sure of Significance in multinomial logit discriminant analysis. Fifth, exploratory power of the discriminant model were estimated by 53% in classification analysis. Finally, strategic policy for IP investment and its management should be taken urgently to create intangible asset value and to improve the capability of its management.

• Journal of Nutrition and Health
• /
• v.31 no.1
• /
• pp.36-45
• /
• 1998

Dietary and other factors affecting bone density of 32 Korean healthy college women aged 19-23 years were assessed. Data for food and nutrient intake was obtained by a semiquantitiative food frequency questionnaire. Serum samples were anlayzed for total Ca, P, Ca++, PTH, calcitonin and 25-hydroxycholecalciferol , (25-OH-Vit D3) and BMDs of lumbar spine(L2-L4), femoral neck(FN), ward's triangle (WT) and trochanter(TR) were measured by an XR-series X-ray bone densitometer. Relationships between the factors and BMDs were analyzed by stepwise multiple regression analysis and Pearson's correlation coefficient(r). The results are summarized as follows. Mean daily intake of energy(86.1%), Ca(74.3%), vitamin A (53.75), Fe(49.75) and vitamin B$_2$(86.6%) were lower while other notrients incuding P(126%) were higher than the Korean RDA. The BMDs of lumbar spines and femurs ranged from 0.73g/$\textrm{cm}^2$ to 1.23g/$\textrm{cm}^2$and 0.48g/$\textrm{cm}^2$ to 1.04g/$\textrm{cm}^2$, respectively. Both protein and P intakes were inversely associated with serum total Ca. Furthermore, Ca intake as well as Ca/P ratio (Ca/P) were inversely associated with serum ionized Ca(Ca++) concentration. The intakes of protein P and Ca , however, were not significantly associated with the BMDs measured in this study. There were little association between BMDs and alcoholic beverage or caffeine consumption. The only significant association detected was a positive relationship between caffeine consumption and BMD of WT. It seemed to be noticeable that BMDs of L2-L$_4$, FN and WT were significantly inversely associated with serum P concentration. However, there was no significant association between BMDs and the levels of total Ca to Ca++ in serum. Body weight was positively associated with BMD of lumbar spine and BMI was also positively associated with BMDs of FN and WT. The subjects who had an early menarche appeared to have higher BMDs than those who had had a late mearche. According to stepwise multiple regression analysis. Menarche and BMI were stronger determinants of BMDs in the young women than was diet. P intake appeared to be a more potent dietary determinant than Ca intake. The three factors, menarche, BMI , and P intake , additionally accounted for 24% and 378% of the variance in BMDs of FN and L$_2$-L$_4$, respectively. Further investigation is necessary to determine the factors needed to increase serum P level which negatively affects. BMD in young Korean college women.

• The Journal of Advanced Prosthodontics
• /
• v.1 no.3
• /
• pp.113-117
• /
• 2009

STATEMENT OF PROBLEM. Recently Yttrium-stabilized tetragonal zirconia polycrystal (Y-TZP) has been introduced due to superior flexural strength and fracture toughness compared to other dental ceramic systems. Although zirconia has outstanding mechanical properties, the phenomenon of decrease in the life-time of zirconia resulted from degradation in flexural strength after low temperature aging has been reported. PURPOSE. The objective of this study was to investigate degradation of flexural strength of Y-TZP ceramics after various low temperature aging treatments and to evaluate the phase stability and micro-structural change after aging by using X-ray diffraction analysis and a scanning electron microscope (SEM). MATERIAL AND METHODS. Y-TZP blocks of Vita In-Ceram YZ (Vita Zahnfabrik, Bad $S\ddot{a}ckingen$, Germany) were prepared in 40 mm (length) $\times$ 4 mm (width) $\times$ 3 mm (height) samples. Specimens were artificially aged in distilled water by heat-treatment at a temperature of 75, 100, 125, 150, 175, 200, and $225^{\circ}C$ for 10 hours, in order to induce the phase transformation at the surface. To measure the mechanical property, the specimens were subjected to a four-point bending test using a universal testing machine (Instron model 3365; Instron, Canton, Mass, USA). In addition, X-ray diffraction analysis (DMAX 2500; Rigaku, Tokyo, Japan) and SEM (Hitachi s4700; Jeol Ltd, Tokyo, Japan) were performed to estimate the phase transformation. The statistical analysis was done using SAS 9.1.3 (SAS institute, USA). The flexural strength data of the experimental groups were analyzed by one-way analysis of variance and to detect statistically significant differences ($\alpha$= .05). RESULTS. The mean flexural strength of sintered Vita In-Ceram YZ without autoclaving was 798 MPa. When applied aging temperature at below $125^{\circ}C$ for 10 hours, the flexural strength of Vita In-Ceram YZ increased up to 1,161 MPa. However, at above $150^{\circ}C$, the flexural strength started to decrease. Although low temperature aging caused the tetragonal-to-monoclinic phase transformation related to temperature, the minimum flexural strength was above 700 MPa. CONCLUSION. The monoclinic phase started to appear after aging treatment above $100^{\circ}C$. With the higher aging temperature, the fraction of monoclinic phase increased. The ratio of monoclinic/tetragonal + monoclinic phase reached a plateau value, circa 75% above $175^{\circ}C$. The point of monoclinic concentration at which the flexural strength begins to decrease was between 12% and 54%.