• 정보처리학회논문지C
• /
• 제16C권2호
• /
• pp.237-244
• /
• 2009

무선 센서 네트워크에서의 혼잡은 데이터 손실 비율을 증가시키고, 전송 지연이 길어지는 문제점을 야기한다. 기존의 무선 센서 네트워크를 위한 혼잡 제어 방법들은 혼잡을 판단하고, 혼잡에 연관된 센서노드들을 선택하여 샘플링 주기를 조절함으로써 전송량을 줄이는 방법을 사용한다. 그러나 샘플링 주기 조절 기법은 시간적 데이터 손실에 민감한 응용에 사용하기 어려운 문제점이 있다. 본 연구에서는 무선 센서 네트워크에서의 혼잡을 해결하는 새로운 혼잡 제어 기법인 ACT를 제안한다. 제안하는 ACT기법에서는 큐 감시를 통해 다중 큐 임계값을 사용하여 네트워크의 상태를 판단한다. ACT는 혼잡 발생시 패킷 전송 간격을 조절하는 적응적 흐름 제어 기법을 통해 네트워크의 효율성을 높이며 패킷판단 기법을 통하여 노드간의 공평성을 보장한다. 또한 압축을 이용하여 센서노드 간 전송량을 조절하도록 하여 이용가능한 데이터양을 증가시킨다. 실험을 통하여 제안된 ACT기법이 기존 프로토콜에 비해 네트워크의 패킷 전송 효율성을 향상시키며 센서노드들에게 공평성있는 데이터전송을 제공함을 보인다.

• 한국산학기술학회논문지
• /
• 제14권7호
• /
• pp.3562-3569
• /
• 2013

콘크리트 구조물은 외부환경에 의하여 시간이 지남에 따라 그 성능이 지속적으로 감소되며 이를 보강하기 위하여 새로운 재료의 개발 및 적용에 대한 연구가 활발히 진행되고 있다. FRP복합재료의 경우, 높은 강도-중량비, 우수한 내식성과 시공성을 갖추고 있어 노후된 구조물의 보수 및 보강재료로 많은 관심을 받고 있으나 현장적용 시FRP 복합재료의 외부환경에 대한 신뢰성 및 설계기준 부족으로 재료의 장점에도 불구하고 그 활용도는 그리 증가하지 못하였다. 본 연구에서는 콘크리트 압축부재의 횡 구속용으로 적용 가능한 GFRP 보강재에 대하여 고온으로의 온도변화에 따른 재료적 특성과 구속효과에 대한 구조적 거동을 조사하였다. 이를 위하여 GFRP 보강재의 온도에 따른 인장 물성치와 콘크리트 부재의 구속 압축효과를 실험변수로 각각 선정하였으며 GFRP로 횡 구속된 콘크리트 시편을 설정온도별로 각각 3개씩 제작하여 실험연구를 수행하였다. 실험 시 온도변화의 경우 고온로를 사용하여 일정 시간동안 실험온도에 노출되도록 시편을 거치하였으며 압축성능평가의 경우 만능재료시험기(UTM)를 통하여 섬유의 횡 구속에 따른 보강효과 변화를 파악하였다. 최종적으로 온도변화에 따른 GFRP재료의 인장특성은 점진적으로 감소하는 것을 정량적으로 알 수 있었으며, 콘크리트 횡 구속 시 GFRP 보강재에 의한 구속능력은 $150^{\circ}C$까지 온도가 상승함에 따라 감소하는 것을 본 연구를 통하여 관찰하였다.

• Structural Engineering and Mechanics
• /
• 제24권5호
• /
• pp.621-639
• /
• 2006

Stability of a cylindrical shell subject to a uniform axial compression, which is a power function of time, is examined within the framework of small strain elasto-plasticity. The material of the shell is incompressible and the effect of the elastic unloading is considered. Initially, employing the infinitesimal elastic-plastic deformation theory, the fundamental relations and Donnell type stability equations for a cylindrical shell have been obtained. Then, employing Galerkin's method, those equations have been reduced to a time dependent differential equation with variable coefficient. Finally, for two initial conditions applying a Ritz type variational method, the critical static and dynamic axial loads, the corresponding wave numbers and dynamic factor have been found. Using those results, the effects of the variations of loading parameters and the variations of power of time in the axial load expression as well as the variations of the radius to thickness ratio on the critical parameters of the shells for two initial conditions are also elucidated. Comparing results with those in the literature validates the present analysis.

• 한국수소및신에너지학회논문집
• /
• 제23권6호
• /
• pp.619-627
• /
• 2012

This study was experimentally investigated on the effects of spring stiffness applied to linear compressor chambers. The springs prevented piston head from colliding with engine cover, stored the kinetic energy and regenerated the kinetic energy. The linear engine has two combustion chambers and four compressor chamber. The combustion chamber bore size was 30 mm, maximum stroke was 31 mm and effective stroke volume was 25.45 cc respectively. The spring stiffness was varied such as 0, 0.5, 1.00, 2.9 and 14.7 N/mm. The linear engine was fueled with premixed LPG (propane 99%) and air by pre-mixture device. As an experimental result, The stroke, piston velocity and the piston frequency were increased by high spring stiffness. Also, thermal efficiency was grown. because the increased stroke made the higher compression ratio. In conclusion, electric power and efficiency were improved.

• 한국분무공학회지
• /
• 제20권3호
• /
• pp.141-148
• /
• 2015

In order to research engine characteristics of spark-ignited engine with intake valve closing timing change for Miller cycle, two cam for LIVC(Late Intake Valve Closing) were designed and fabricated an prototype valvetrain. And intake valve closing timing were adjusted to build low compressing and high expansion cycle for HEV. In experimental study, it were investigated with different engine speed, spark timing and air-fuel ratio to compare base cam and LIVC cam type. It was found that the volumetry efficiency and effective work of compression process were decreased in case of LIVC cam. When compared with the existing results, the maximum pressure in the cylinder was reduced about 12~13 bar and the volumetric efficiency was reduced about 16%.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.816-821
• /
• 2003

The pumping characteristics of a disk-type drag pump (DTDP) from free molecular flow region to the slip flow region are calculated by the direct simulation Monte Carlo (DSMC) method. In this study, the pumping performance is studied numerically for several channel depths. The interaction between molecules is modeled by variable hard-sphere (VHS). The no time counter method is used as a collision sampling technique. The clearance between rotor and stator is considered an effect on performance. Spiral channels are cut on both upper and lower sides of rotating disks, and stationary disks are planar. A three-dimensional DSMC method for the analysis of steady rarefied flows in a single-stage DTDP has been developed. Velocity and density fields were obtained by the DSMC simulation in the rotor. The present experimental data in the outlet pressure range of $7.5{\times}10^{-3}{\sim}4$ Torr were compared with the DSMC results in the single-stage DTDP. Comparison between the experimental data and DSMC results showed good agreement.

• 콘크리트학회논문집
• /
• 제11권4호
• /
• pp.147-156
• /
• 1999

Current design code states that the strength reduction factor shall be permitted to be increased linearly from that for axial compression to that for flexure as the design axial load strength $\Phi$cPn decrease from 0.1fckAg to zero. Since this empirically adopted axial load level of $\Phi$cPn=0.1fckAg considers only sectional area and concrete strength, the other variables such as steel ratio, steel yielding strength, and steel arrangement can not be considered. This research is performed to investigate the consistency and the rationality of the code requirement for determination of column design strength. A nonlinear axial force-moment-curvature analysis was conducted in order to investigate the ductility of reinforced concrete column sections. As the result of ductility analysis, it was found that the ductility at the axial force of $\Phi$cPn=0.1fckAg represented a lock of consistency for the various variable contained sections. Therefore, a more reasonable application method of strength reduction factor is proposed, that is based on the strain ductility index.

• 한국응급구조학회지
• /
• 제23권2호
• /
• pp.75-86
• /
• 2019

Purpose: It is crucial that 119 emergency medical technician (EMT) have adequate knowledge regarding forensic science. This study aimed to assess the forensic knowledge of EMTs in the Republic of Korea. Methods: This study was conducted on EMTs of five fire stations in D metropolitan city between August 6 and August 13, 2018. A questionnaire consisting of items on crime-related incident recognition (i.e., mechanical asphyxiation, trauma, sex crimes, and child abuse), forensic evidence management (i.e., evidence collection, preservation, and recording) was administered to the participants. Finally, 119 questionnaires were analyzed. Results: The ratio of correct answers for crime-related incidents recognition was 55.82%, which was lower than that for forensic evidence management(84.5%). In particular, the scores for the type of neck compression(16.5%) and wound assessment(44.0%) were low. The percentage of correct answers for forensic evidence management was 78.4% for evidence collection, 84.4% for evidence preservation, and 90.6% for evidence recording. Previous forensic education experience was not a significant variable. Conclusion: Specific and practical forensic science education on perception of crime-related incident, including asphyxia and wound identification, and forensic evidence collection is needed.

• 한국건설순환자원학회논문집
• /
• 제1권2호
• /
• pp.107-113
• /
• 2013

연구에서는 문제시 되는 순환자원의 종류를 상호 보완적으로 활용하여 문제를 해결하고자하는 연구이다. 즉, 고로슬래그 미분말(BS)의 잠재 수경성반응을 순환 잔 굵은 골재의 알칼리로 반응시키고, 부족분의 알칼리를 보통포틀랜드 시멘트(OPC)로 해결하면서 소석회 처리된 소각장애시(WA)의 치환율을 실험변수로하여 최적치를 구하고자 실험하였다. 실험결과 WA 치환율이 증가할수록 유동성과 공기량은 약간 저하하고, 염화물량은 증가하여 불리하였지만 압축 및 인장강도가 1% 에서 최대 값을 나타내어 폐기물 유효처리 관점까지도 고려하면 WA 1% 혼합이 최적인 것으로 분석되었다.

• Journal of Biosystems Engineering
• /
• 제8권1호
• /
• pp.38-46
• /
• 1983

This study was carried out to investigate the possibility of improving the performance of a kerosene engine with water addition. The engine used in this study was a single-cylinder, four-cycle kerosene engine with the compression ratio of 4.5. Water could be successfully added into the inlet manifold by an extra carburetor for the volumetric ratios of 5, 10, 20, and 30 percents. Variable speed tests at wide-open throttle were performed for five speed levels in the range of 1,000 to 2,200rpm for each fuel type. Volumetric efficiency and brake specific fuel consumption were determined, and brake thermal efficiency based on the lower heats of combustion of kerosene was calculated. To examine variation in fuel consumption, CO concentration, and cooling water temperature, part load tests were also performed. The results obtained are summarized as follow. (1) Brake torque increased almost in proportion to volumetric efficiency. But the ratio of increase in torque was greater than that of volumetric efficiency. Mean torque over the speed range of 1,000 to 2,200rpm increased 1, 3, 7, and 2 percents for 5, 10, 20, and 30 percents water addition, respectively. The increase in brake torque with water addition was greater at lower speeds. (2) Mean brake specific fuel consumption over the speed range of 1,000 to 2,200rpm decreased 1, 2, 3, and 3 percents for 5, 10, 20, and 30 percents water addition, respectively. (3) Mean temperature of cooling water over the speed range of 1,000 to 2,200rpm decreased 2, 4, 8, and 12 percents for 5, 10, 20, and 30 percents water addition, respectively. (4) The effects of decreasing CO concentration in the exhaust emissions with water addition were significant. At the speed range of 1,000 to 2,200rpm, CO concentration in the exhaust emissions decreased 2, 10, 23, percents for 5, 10, and 20 percents water addition, respectively. (5) Deposits were not discovered in the combustion chamber during the experiment. However, a little rust was formed in the water-supply carburetor.