• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.1
• /
• pp.39-45
• /
• 2008

The most important elements in flexible pavement design criteria are stress and strain distributions. To obtain reasonable stress and strain distributions in pavements, moving wheel loads must be applied to analyze the pavement responses. In this study, finite element analysis was used to identify the three-dimensional states using the vehicle load into a constant-position / time-variable load (25, 50 and 80km/hr). In an elastic system, the strain is the same in both longitudinal and transverse directions under a single wheel. However, the same is not necessary in a viscoelastic system. Test results showed that the maximum values between transverse and longitudinal strains the bottom of asphalt concrete base layers under 25km/hr were were about 40 percent.

• Korean Journal of Family Medicine
• /
• v.39 no.6
• /
• pp.325-332
• /
• 2018

Background: Hypertension is a major contributor to the global disease burden of cardiovascular and cerebrovascular disease. The aim of this study was to determine demographic and clinical factors associated with adherence to antihypertensive medication. Methods: From August 2012 to February 2015, we recruited 1,523 Korean patients with hypertension who visited family physicians. The study was conducted in 24 facilities located in urban and metropolitan areas. Of these facilities, two were primary care clinics and 22 were level 2 or 3 hospitals. Adherence was assessed using the pill count method; a cut-off value of 80% was used as the criterion for good adherence. Sociodemographic and lifestyle factors were compared between the adherent and nonadherent groups using the chi-square test for categorical variables and t-test for continuous variables. Binary logistic regression analysis was performed with medication adherence as the outcome variable. Results: Of the 1,523 patients, 1,245 (81.7%) showed good adherence to antihypertensive medication. In the multivariate logistic analysis, age ${\geq}65$ years, exercise, treatment in a metropolitan-located hospital, being on ${\geq}2$ classes of antihypertensive medication and concomitant medication for diabetes, and a family history of hypertension or cardiovascular diseases were associated with good adherence. Patients who had a habit of high salt intake were less adherent to medication. Conclusion: Multiple classes of antihypertensive medications, concomitant medication, and exercise were associated with good adherence to antihypertensive medication, and high salt intake was associated with poor adherence to antihypertensive medication. These factors should be considered to improve hypertension control.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.42 no.1
• /
• pp.64-73
• /
• 2019

The manufacturing companies under Make-To-Order (MTO) production environment face highly variable requirements of the customers. It makes them difficult to establish preemptive production strategy through inventory management and demand forecasting. Therefore, the ability to establish an optimal production schedule that incorporates the various requirements of the customers is emphasized as the key success factor. In this study, we suggest a process of designing the simulation model for establishing production schedule and apply this model to the case of a flat glass processing company. The flat glass manufacturing industry is under MTO production environment. Academic research of flat glass industry is focused on minimizing the waste in the cutting process. In addition, in the practical view, the flat glass manufacturing companies tend to establish the production schedule based on the intuition of production manager and it results in failure of meeting the due date. Based on these findings, the case study aims to present the process of drawing up a production schedule through simulation modeling. The actual data of Korean flat glass processing company were used to make a monthly production schedule. To do this, five scenarios based on dispatching rules are considered and each scenario is evaluated by three key performance indicators for delivery compliance. We used B2MML (Business To Manufacturing Markup Language) schema for integrating manufacturing systems and simulations are carried out by using SIMIO simulation software. The results provide the basis for determining a suitable production schedule from the production manager's perspective.

• Research in Community and Public Health Nursing
• /
• v.29 no.4
• /
• pp.467-475
• /
• 2018

Purpose: The purpose of this study is to investigate adherence to the clean intermittent catheterization (CIC) and influencing factors on the adherence following a customized intensive education program (CIEP). Methods: This work is a retrospective descriptive study. The subjects were 226 emptying failure patients who learned in a CIEP from January 2012 to July 2014. The program developed in 2011 and consisted of 1) customized theoretical education; based on the results of urologic tests, underlying disease, or surgery of the patients, 2) hands-on practice until the trainees were able to master the techniques, 3) questions about the process of catheterization and what he/she needs to know. 4) at follow-up, the survey about adherence and barrier to CIC. Clinical characteristics; the level of satisfaction, understanding, and self-confidence; the barrier in medical records were reviewed. Results: The short-term adherence rate (median 22 days) is 87.6% and the long-term adherence rate (median 112 days) is 50.4%. The biggest obstacle is time management. The levels of satisfaction, understanding, and self-confidence are very high. The variable of Income is the only factor that has influence on adherence. Conclusion: Despite the CIEP, the adherence rate is relatively low. In addition to the education, emotional and psychological supports and regular follow-up are needed to improve long-term adherence.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.746-754
• /
• 2023

Aircraft accidents are characterized by a low probability of survival compared to other means of transportation, and the main causes appear to be human factors such as violation of regulations and communication. In order to activate the safety management system to prevent such accidents, an important key variable is to recognize the importance of safety culture and actively engage in safety behavior rather than simply emphasizing compliance with regulations to flight crew members. Even if there are well-established regulations, safety culture, The effectiveness varies depending on the safety atmosphere and level of safety behavior. In this study, the correlation between safety culture and safety behavior was verified through a survey of domestic flight crew members' awareness of safety culture. The results showed that fair culture and self-reporting were not activated enough to have a significant impact on safety behavior. We aim to improve the performance of the safety management system by confirming the characteristics of safety culture and safety behavior.

• Nuclear Engineering and Technology
• /
• v.56 no.5
• /
• pp.1887-1894
• /
• 2024

Fatigue strength of the structural materials of lead-cooled fast reactors (LFRs) and accelerator-driven systems (ADS) may be degraded in liquid metal (Lead or lead-bismuth eutectic (LBE)) environments. The fatigue crack growth (FCG) data of structural materials in liquid LBE are necessary for damage tolerance design, safety assessment and life management of key equipment. A novel monitoring system for fatigue crack length was designed on the compliance method and the monitor technology of crack opening displacement (COD) of CT specimens by the linear variable differential transformers (LVDT) system. It can be used to predict the crack length by monitoring the COD of CT specimens in harsh high-temperature liquid LBE using a LVDT system. The prediction accuracy of this system was verified by FCG experiments in room temperature air and liquid LBE at 150, 250 and 350 ℃. The first results obtained in the FCG test for T91 steel in liquid LBE at 350 ℃ are presented.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.1
• /
• pp.9-18
• /
• 2015

In this paper, we verify the optimal topology design for heat conduction problems in steady stated which is obtained numerically using the adjoint design sensitivity analysis(DSA) method. In adjoint variable method(AVM), the already factorized system matrix is utilized to obtain the adjoint solution so that its computation cost is trivial for the sensitivity. For the topology optimization, the design variables are parameterized into normalized bulk material densities. The objective function and constraint are the thermal compliance of the structure and the allowable volume, respectively. For the experimental validation of the optimal topology design, we compare the results with those that have identical volume but designed intuitively using a thermal imaging camera. To manufacture the optimal design, we apply a simple numerical method to convert it into point cloud data and perform CAD modeling using commercial reverse engineering software. Based on the CAD model, we manufacture the optimal topology design by CNC.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.149-161
• /
• 2022

Because the speed limit affects moving speed, it is closely related to traffic accidents as well as traffic flow. The existing speed limit calculation methods consider various engineering factors such as lanes, intersection spacing, driveways, crosswalks, 85 percentile speed, land uses, and roadway geometric characteristics etc. However, it can be said that the engineering analysis is insufficient because the traffic impact analysis considering traffic volume is not carried out. In addition, only 85 percentile speed, which is the spot speed, does not reflect the characteristics of the traffic flow on the road. In this paper, the effect of the speed limit change on the moving speed and the travel speed was analyzed in detail accordinr to the variation of intersection spacing and traffic volume. And by using the results, we proposed a speed limit calculation method that maintains the same service level as before the speed limit change, thereby increasing the speed improvement effect and reducing the difference between moving speed and travel speed. In addition, a variable speed limit operation method according to the change in traffic volume was also suggested. This method is expected to be effective in terms of safety by reducing the speed difference, which affects the severity of traffic accidents, while securing the speed improvement effect, and increasing the speed limit compliance rate of drivers by operating the speed limit that reflects the speed change due to the variation of traffic volume.

• Journal of agricultural medicine and community health
• /
• v.28 no.1
• /
• pp.79-92
• /
• 2003

Objectives: To investigate the reinfection rate of Helicobacter pylori and the factors related to reinfection of H. pylori, 86 persons were examined in April 2000 after 1 year follow-up period and 77 persons were examined in October 2001 after two and a half-year follow-up period in Gyeongju-si, Gyeongsangbuk-do, Korea. Methods: The subjects were confirmed as H. pylori negative by urea breath test(UBT), and asked to answer the questionnaire regarding demographic characteristics, dyspepsia symptoms, health-related behaviors and family history. Results: The reinfection rate on the first year of the eradication of H. pylori was 15.6%, when the 77 subjects have finished follow-up observation for one year. In the urea breath test performed after two and a half year, 13 out of 77 were positive, with the reinfection rate of 16.9%. Age, sex, socio-economical status, educational level and family history were not associated with the reinfection, while there was significant association between the reinfection and postprandial fullness and epigastric bloating in subjective dyspepsia that the subjects who were determined to be negative in the urea breath test for the following year. The treatment compliance and drinking were significant variables in univariate analysis. Meanwhile, the cases in which the dyspepsia symptom scores for the recent year were 2 to 3 points served as the only statistically significant variable in multiple logistic regression analysis, with the odds ratio of 4.5. The cases in which salt intake during meals was exceeded were 8.7 in the odds ratio, but statistically insignificant. Conclusions: Conclusively, the first-year reinfection rate was 15.6%, and the second-year reinfection rate was 16.9%. Thecomplaints of subjective dyspeptic symptoms and the treatment compliance, as the basis for predicting the H. pylori reinfection in communities, can be used as the basis to screen the subjects for follow-up examination to find out H. pylori infection.

• Management & Information Systems Review
• /
• v.30 no.3
• /
• pp.191-215
• /
• 2011

Retailing service companies need to manage customer's behavior participating in service production and delivery process, while trying to differentiate from competitors with customer services. They also need to know the level of customer participation to make good use of customer participation in retailing service delivery process. Therefore, this paper expects to show the level of customer participation in domestic primary retailing service types. In details, this paper empirically identifies how different the level of customer participation is in four retailing service types-family restaurant, hair service, hospital service, educational service. As results, activity effort, communication effort, and compliance effort variables of customer participation were significantly in different level. But, sympathy effort variable of customer participation was not identified on the level of difference in four retailing service types. Additionally, hospital service showed the highest level of customer participation in four retailing service types, then family restaurant, education service, and hair service were in order. Judging these results, this paper suggests that the level of customer participation according to retailing service types would be different empirically. Also, this paper provides the opportunities to make properly good use of customer participation suitable to individual retailing type.