• Smart Structures and Systems
• /
• v.22 no.3
• /
• pp.335-340
• /
• 2018

The behavior of concrete slabs in composite beam with C and L shaped angle shear connectors has been studied in this paper. These two types of angle shear connectors' instalment have been commonly utilized. In this study, the finite element (FE) analysis and soft computing method have been used both to present the shear connectors' push out tests and providing data results used later in soft computing method. The current study has been performed to present the aforementioned shear connectors' behavior based on the variable factors aiming the study of diverse factors' effects on C and L shaped angle in shear connectors. ANFIS (Adaptive Neuro Fuzzy Inference System), has been manipulated in providing the effective parameters in shear strength forecasting by providing input-data comprising: height, length, thickness of shear connectors together with concrete strength and the respective slip of shear connectors. ANFIS has been also used to identify the predominant parameters influencing the shear strength forecast in C and L formed angle shear connectors.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.5
• /
• pp.622-626
• /
• 2007

Using multi-trait animal model BLUP, selection was conducted over seven generations for growth rate (DG), real-time ultrasound loin-eye muscle area (LEA), backfat thickness (BF), and intramuscular fat content (IMF) to develop a new line of purebred Duroc pigs with enhanced meat production and meat quality. This study was intended to investigate the relationship between restriction fragment length polymorphism (RFLP) of a heart fatty acid-binding protein (H-FABP) gene and intramuscular fat content (IMF) of this Duroc purebred population. The present experiment examined the RFLP of 499 slaughtered pigs. The DNA was separated from the blood or ear tissue of the pigs, which were slaughtered at 105 kg of body weight. Intramuscular fat content of the longissimus muscle was measured using chemical analysis. A significant difference was detected in the breeding value of IMF among the H-FABP PCR RFLP genotypes. The AA genotype has a significantly larger positive effect on the IMF breeding value than do the Aa and aa genotypes for the MspI RFLP. In addition, the DD genotype has a significantly greater positive effect on IMF breeding value than the Dd and dd genotypes for the HaeIII RFLP. For the HinfI RFLP, the hh genotype has a significantly larger positive effect on IMF breeding value than the HH genotype. Multiple regression analysis was performed using the IMF breeding values as the dependent variable and the three H-FABP genotypes as independent variables. Results revealed that the contribution of the genotypes to variation in IMF breeding values was approximately 40%. These results demonstrated that H-FABP RFLPs affect IMF in this Duroc population.

• Current Photovoltaic Research
• /
• v.2 no.4
• /
• pp.147-151
• /
• 2014

A boron doping process using a boron tri-bromide ($BBr_3$) as a boron source was applied to form a $p^+$ emitter layer on an n-type mono-crystalline CZ substrate. Nitrogen ($N_2$) gas as an additive of the diffusion process was varied in order to study the variations in sheet resistance and the uniformity of doped layer. The flow rate of $N_2$ gas flow was changed in the range 3 slm~10 slm. The sheet resistance uniformity however was found to be variable with the variation of the $N_2$ flow rate. The optimal flow rate for $N_2$ gas was found to be 4 slm, resulting in a sheet resistance value of $50{\Omega}/sq$ and having a uniformity of less than 10%. The process temperature was also varied in order to study its influence on the sheet resistance and minority carrier lifetimes. A higher lifetime value of $1727.72{\mu}s$ was achieved for the emitter having $51.74{\Omega}/sq$ sheet resistances. The thickness of the boron rich layer (BRL) was found to increase with the increase in the process temperature and a decrease in the sheet resistance was observed with the increase in the process temperature. Furthermore, a passivated emitter solar cell (PESC) type solar cell structure comprised of a boron doped emitter and phosphorus doped back surface field (BSF) having Ni/Cu contacts yielding 15.32% efficiency is fabricated.

• Journal of Nutrition and Health
• /
• v.29 no.9
• /
• pp.991-1002
• /
• 1996

The objectives of this study were to obtain normative data for 45 mother-daughter pairs on spine, femur(neck, ward's triangle, trochanter) and total body BMD (bone mineral density) measured by dual energy X-ray absorptiometry, anthropometric measurement, body composition, biochemical markers, nutrient intakes and energy expenditure, to determin the interrelations of these factors within each group, to measure familial resemblance for each variable. We observed significantly positive correlations between height, weight, head, hip and calf circumferences, tricep, femur and calf skinfold thickness, total lean body mass(=weight-total fat body mass-bone mineral content), protein and fat intakes, Ca index, serum total protein and albumin of monter-daughter pairs(p<.05-p<.001). Among mothers, age, osteocalcin, higher, weight, Ca and energy intakes were predictors of BMDs. Among daughters, weight and energy intake were predictors of BMDs. The BMD in lumbar spine(r=.48, p<.01), femoral neck(r=.38, p<.05), ward's triangle(r=.36, p<.05) of the mothers were significantly correlated with those of the daughters, after adjustment for mother's age, hight, weight, osteocalcin, Ca and energy intakes and daughter's weight, energy intake. In regression analyses, mother's BMD also were positively associated with daughter's BMD in lumbar spine, femoral neck, ward's triangle. Our findings support that mothers with low BMD tended to have daughters with low BMD. In the age groups studied, as well genetic factors as environmental factors may have an important role in determining BMD. This study suggests that women may successfully enhance their genetically determined BMD through adequate nutrient intakes and weight bearing exercise.

• Journal of Environmental Science International
• /
• v.21 no.12
• /
• pp.1495-1501
• /
• 2012

In this study, an experiment was conducted on influent water with low concentrations of organic matter, such as river water or secondary treatment water of a sewage treatment plant, according to HRT changes by using aerobic biofilm. In the biofilm process, as the biofilm increases in thickness, the inner membrane can be low in oxygen transfer rate and become anaerobic conditions, while the detachment of biomass from biofilm occurs. To overcome these limitations in the detachment of microorganisms in biofilm, the yarn, which was made from poly propylene(PP), was weaved and manufactured into a tube. Then, a test was carried out by injecting air so that the interior of the biofilm could create aerobic conditions. The results of the experiment showed that the removal efficiency of $TCOD_{cr}$ reached 66.1~81.2% by HRT 2hr, and 50.9 ~61.8% after HRT 1 hr. The removal efficiency of $SCOD_{cr}$ was 45.9 to 55.1% by HRT 1hr, and 26.1% in HRT 0.5hr, showing the highest removal efficiency in HRT 1hr. The SS removal efficiency was at 81.8 to 94.6%, and the effluent SS concentration was very low, indicating less than 2.2 mg/L in all HRT's. As a result, the $SCOD_{cr}$ and $NH_4{^+}$-N that were removed per specific surface area and attached to microbial biofilm showed the highest efficiency in HRT 1hr with 8.37 $gSCOD_{cr}/m^2{\cdot}d$, 2.93 $gNH_4{^+}-N/m^2{\cdot}d$. From the result of reviewing the characteristics of biofilm growth, microorganisms were found to be attached, and increased by 36 days. Later, they decreased in number through detachment, but showed a tendency to increase again 41 days later due to microbial reproduction.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.269-272
• /
• 2008

This paper reports on the cracking mitigation and flexural behavior experimentally observed in concrete prisms layered with strain-hardening cement composites (SHCCs) which is micro-mechanically designed cement composite and exhibits pseudo tensile strain-hardening behavior accompanied by multiple cracking while using a moderate amount of fiber, typically less than 2 percent in term of fiber volume fraction. In this study, SHCC is reinforced with 1.3 percent polyvinyl alcohol (PVA) and 0.20 percent polyethylene (PE) in volume fraction. Tests were conducted using $100{\times}100{\times}400mm$ long prisms supported over a simply supported span of 350mm. The four point load was applied using MTS servo control machine. The thickness patched with SHCC is the main variable for this study. Experimental study shows that when subject to monotonic flexural loading, the SHCC layered repair system showed 2.7 - 4.2 times increased load carrying capacity, and mitigated cracking damage of concrete beams layered with SHCC compared with plain concrete beams.

• The korean journal of orthodontics
• /
• v.43 no.5
• /
• pp.225-234
• /
• 2013

Objective: The purpose of this study was to classify Korean young adults into 3 groups on the basis of upper incisor exposure rates (UIERs) and to compare the skeletal, dental, and soft tissue variables. Methods: Samples were obtained from 127 students at the College of Dentistry, Wonkwang University in South Korea. Facial photographs of frontal posed smiles and lateral cephalograms of the subjects were taken. The subjects were divided into 3 groups on the basis of UIERs and 20 measurements were compared among the 3 groups. The correlations between the variables were determined. Results: Male and female subjects showed significant differences in the group distribution. Male subjects showed higher frequencies of low smiles, and female subjects showed higher frequencies of high smiles. The vertical height of the anterior alveolar process of the maxilla directly correlated with the UIER. However, the UIER showed no significant correlation with the vertical height of the anterior basal bone or the inclination of the upper incisor axis. In female subjects, the upper central incisor clinical crown length showed an inverse correlation with the UIER. However, this variable showed no significant correlation with the UIER in male subjects. Conclusions: The UIER was directly correlated with the levator muscle activity of the upper lip and inversely correlated with the upper lip thickness, yet there was no correlation between the UIER and upper lip length at rest.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.3
• /
• pp.741-747
• /
• 2016

The aim of study was to estimate genetic parameter of carcass traits in commercial Hanwoo steer using national animal model for selection of superior bull. Analyzed data (n=5,843) on carcass traits was collected from 107,020 Hanwoo steer. The animal model was used to estimate heritability and genetic correlations. The estimated heritability of carcass traits were 0.19, 0.17, 0.20 and 0.23 for carcass weight, eye muscle area, backfat thickness and marbling score, respectively. The estimated heritability for carcass traits in commercial Hanwoo are low than estimated heritability of national progeny test population for selection of superior bull because breeding environment, genetic performance of cow and feeding day was different. Therefore, we suggests that animal model can include practical genetic variable based on national animal model to improve genetic performance in commercial Hanwoo.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.9
• /
• pp.1931-1942
• /
• 2002

In this paper a formulation of robust optimization is presented and illustrated by a design example of vibratory micro gyroscopes in order to reduce the effect of variations due to uncertainties in MEMS fabrication processes. For the vibratory micro gyroscope considered it is important to match the resonance frequencies of the vertical (sensing) and lateral (driving) modes as close as possible to attain a high sensing sensitivity. A deterministic optimization in which the difference of both the sensing and driving natural frequencies is minimized as an objective function results in highly enhanced performance but apt to be very sensitive to fabrication errors. The formulation proposed is to attain robustness of the performance by including the sensitivity of the response with respect to uncertain variables as a term of objective function to be minimized. This formulation is simple and practically applicable since no detail statistical information on fabrication errors is required. The geometric variables, beam width, length and thickness of vibratory micro gyroscopes are adopted as design variables and at the same time considered as uncertain variables because here occur the fabrication errors. A robustness test in terms of a percentage yield by using the Monte Carlo simulation has shown that the robust optimum produces twice more acceptable designs than the deterministic optimum. Improvement of robustness becomes bigger as the amount of fabrication errors is assumed larger. Considering that the magnitude of fabrication errors and uncertainties in a MEMS structure are comparatively large, the present method is illustrated to be a viable approach for a robust MEMS design.

• Horticultural Science & Technology
• /
• v.35 no.2
• /
• pp.220-231
• /
• 2017

Grafting using a pumpkin (Cucurbita sp.) rootstock is an effective way to improve cucumber (Cucumis sativus) resistance to a combination of chilling and salinity stresses. We evaluated the tolerance of 15 pumpkin cultivars to chilling, salinity, and combined stresses at the germination and seedling stages. Selected plant characteristics, including germination rate, germination potential, germination index, plant height, stem thickness, fresh weight, and dry weight, were analyzed. We used the unweighted pair group method with arithmetic mean for cluster analyses to determine the stress tolerance levels of the pumpkin cultivars. The 15 cultivars were divided into three clusters: tolerant, moderately tolerant, and susceptible to stress treatments. The stress tolerances of all cultivars were variable in the germination and seedling stages, and most cultivars were not tolerant to individual treatments of chilling or salinity stresses at both stages. These results suggest that identifying suitable cultivars for use as rootstock during cucumber grafting should involve the evaluation of stress tolerance during different growth stages. Additionally, cultivars tolerant to chilling stress may not be tolerant to salinity stress; therefore, the choice of pumpkin rootstock should depend on where the grafted plant will be grown. Cultivars tolerant to a combination of chilling and salinity stresses may be useful as rootstock for cucumber grafting. Our findings may serve as reference material for choosing appropriate pumpkin rootstocks for cucumber grafting.