• Structural Engineering and Mechanics
• /
• 제65권4호
• /
• pp.453-464
• /
• 2018

In this paper, an efficient higher-order shear deformation theory is presented to analyze thermomechanical bending of temperature-dependent functionally graded (FG) plates resting on an elastic foundation. Further simplifying supposition are made to the conventional HSDT so that the number of unknowns is reduced, significantly facilitating engineering analysis. These theory account for hyperbolic distributions of the transverse shear strains and satisfy the zero traction boundary conditions on the surfaces of the plate without using shear correction factors. Power law material properties and linear steady-state thermal loads are assumed to be graded along the thickness. Nonlinear thermal conditions are imposed at the upper and lower surface for simply supported FG plates. Equations of motion are derived from the principle of virtual displacements. Analytical solutions for the thermomechanical bending analysis are obtained based on Fourier series that satisfy the boundary conditions (Navier's method). Non-dimensional results are compared for temperature-dependent FG plates and validated with those of other shear deformation theories. Numerical investigation is conducted to show the effect of material composition, plate geometry, and temperature field on the thermomechanical bending characteristics. It can be concluded that the present theory is not only accurate but also simple in predicting the thermomechanical bending responses of temperature-dependent FG plates.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.201-208
• /
• 1991

본 연구에서는 균일 열유동이 접합면에 수직으로 흐르고 접합 경계면 균열의 열경계조건이 단열되어 있는 경우에 균질 및 접합재료 모두에 적용될 수 있는 열응세 기계수를 복소해석방법을 이용하여 구하고자 한다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.752-756
• /
• 2002

Variable weld bead penetrations related to the base metal chemistry of stainless steels in GTA welding have been under constant investigations due to their industrial implications. It has been proposed that among other elements, the sulfur content of steels determines the weld pool geometry, particularly its penetration. It is suggested that the surface tension temperature gradient of steels becomes positive with appropriate dosing in sulfur and results in inward melt flow, propitious for deeper welds. However, the chemistry of industrial steels is complex due to the presence of multiple minor elements either deliberately added or remnant impurity traces. With this in view, investigations on 41 austenitic and nine martensitic stainless steels were carried to see if there existed any possible relation between the weld profile and some of the designated elements. The results suggest no direct correlation between sulfur or any other major or trace element and weld penetration. At first glance the results are contradictory to what is often asserted.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2471-2476
• /
• 2008

Turbulent flow and heat transfer to water at supercritical pressure flowing in vertical pipes is investigated using direct numerical simulation (DNS). A conservative space-time discretization scheme for variable-density flows at low Mach numbers is adopted in the present study to treat steep variations of fluid properties at supercritical pressure just above the thermodynamic critical point. The fluid properties at these conditions are obtained using PROPATH and used in the form of tables in the simulations. The buoyancy influence induced by strong variation of density across the pseudo-critical temperature proved to play an important role in turbulent flow and heat transfer at supercritical state. Depending on the degree of buoyancy influence, turbulent heat transfer may be enhanced or significantly deteriorated, resulting in local hot spots along the heated surface.

• 청정기술
• /
• 제3권1호
• /
• pp.106-113
• /
• 1997

본 연구의 목적은 유동층반응기를 이용하여 층온도와 유속에 따른 석회석입자(천연석회석과 제지슬러지)의 소성과 황화반응 특성에 관해 조사하는 것이었으며, 실험결과는 다음과 같다. 첫째, 층온도는 천연석회석과 제지슬러지 입자의 소성과 황화반응에 매우 큰 영항을 미치는 것으로 나타났으며, 천연석회석의 경우 층온도 $850^{\circ}C$ 또는 $900^{\circ}C$가 최적 온도였고 제지슬러지의 경우 층온도 $800^{\circ}C$가 최적 온도로 조사되었다. 둘째, 유속이 증가할수록 입자의 비표면적은 감소하는 현상을 보였으나 큰 차이를 나타내지는 않았으며, 제지슬러지 입자의 비표면적이 천연석회석 입자의 비표면적 보다 훨씬 큰 것으로 나타났다. 셋째, 유속이 증가할수록 입자의 탈황능이 감소되었으며, 제지슬러지 입자에 의한 흡착량이 천연석회석 입자에 의한 흡착량 보다 큰 것으로 나타났다. 따라서 제지슬러지는 우수한 탈황제라는 것을 확인 할 수 있었으며, 유동층에서 소성반응과 황화반응시 층온도는 매우 중요한 변수라는 것을 알 수 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제30권11호
• /
• pp.1612-1619
• /
• 2017

Objective: The objective of this study was to optimize ultrasonic-assisted enzymatic hydrolysis conditions, including enzyme-to-substrate (E/S) ratio, pH, and temperature, for producing porcine liver hydrolysates (PLHs) with the highest 1,1-diphenyl-2-picrylhydrazyl (DPPH) free radical scavenging activity by using response surface methodology (RSM). Methods: The study used RSM to determine the combination of hydrolysis parameters that maximized the antioxidant activity of our PLHs. Temperature ($40^{\circ}C$, $54^{\circ}C$, and $68^{\circ}C$), pH (8.5, 9.5, and 10.5), and E/S ratio (0.1%, 2.1%, and 4.1%) were selected as the independent variables and analyzed according to the preliminary experiment results, whereas DPPH free radical scavenging activity was selected as the dependent variable. Results: Analysis of variance showed that E/S ratio, pH, and temperature significantly affected the hydrolysis process (p<0.01). The optimal conditions for producing PLHs with the highest scavenging activity were as follows: E/S ratio, 1.4% (v/w); temperature, $55.5^{\circ}C$; and initial pH, 10.15. Under these conditions, the degree of hydrolysis, DPPH free radical scavenging activity, ferrous ion chelating ability, and reducing power of PLHs were 24.12%, 79%, 98.18%, and 0.601 absorbance unit, respectively. The molecular weight of most PLHs produced under these optimal conditions was less than 5,400 Da and contained 45.7% hydrophobic amino acids. Conclusion: Ultrasonic-assisted enzymatic hydrolysis can be applied to obtain favorable antioxidant hydrolysates from porcine liver with potential applications in food products for preventing lipid oxidation.

• 한국미생물·생명공학회지
• /
• 제49권1호
• /
• pp.45-56
• /
• 2021

Improved amylases were developed from protoplast fusants of two amylase-producing Aspergillus species. Twenty regenerated fusants were screened for amylase production using Remazol Brilliant Blue agar. Crude enzyme extracts produced by solid state fermentation of rice bran were assayed for activity. Three variable factors (temperature, pH and enzyme type) were optimized to increase the amylase activity of the parents and selected fusants using rice bran medium and solid state fermentation. Analysis of this optimization was completed using the Central Composite Design (CCD) of the Response Surface Methodology (RSM). Amylase activity assays conducted at room temperature and 80℃ demonstrated that Aspergillus designates, T5 (920.21 U/ml, 966.67 U/ml), T13 (430 U/ml, 1011.11 U/ml) and T14 (500.63 U/ml, 1012.00 U/ml) all exhibited improved function making them the preferred fusants. Amylases produced from these fusants were observed to be active over the entire pH range evaluated in this study. Fusants T5 and T14 demonstrated optimal activity under acidic and alkaline conditions, respectively. Fusants T13 and T14 produced the most amylase at 72 h while parents TA, TC and fusant T5 produced the most amylase after 96 h of incubation. Response surface methodology examinations revealed that the enzyme from fusant T5 was the optimal enzyme demonstrating the highest activity (1055.17 U/ml) at pH 4 and a temperature of 40℃. This enzyme lost activity with further increases in temperature. Starch hydrolysis using fusant T5 gave the highest yield of glucose (1.6158 g/100 ml). The significant activities of the selected fusants at 28 ± 2℃ and 80℃ and the higher sugar yields from cassava starch hydrolysis over their parental strains indicate that it is possible to improve amylase activity using the protoplast fusion technique.

• Ecology and Resilient Infrastructure
• /
• 제5권4호
• /
• pp.229-245
• /
• 2018

This study aims to investigate the changes in the riparian vegetated area in the Naeseong stream, an unregulated river, in order to analyze the main factors leading to these changes. For this purpose, the land surface cover in the channel area of the Naeseong stream was classified into 9 categories using past aerial photographs collected between 1970 and 2016, which recorded the long-term changes of the Naeseong stream. The increase or decrease in the vegetated area was calculated for each category using a pair of before and after images. The changes in the vegetated area were divided into 6 periods: the unvegetated channel period (1970 - 1980), the first rapid increase (1980 - 1986), the period of decrease due to flood (1986 - 1988), the period of repetitive man-induced disturbance and vegetation increase (1988 - 2008), the period of gradual vegetation increase (2008 - 2013), and the period of second rapid increase (2013 - 2016). Multiple regression analysis was performed using independent variables representing hydrology, climate, and geomorphology. The major variables found to be involved in the changes in the vegetated area of the Naeseong stream were the discharge during June - July, channel width, and temperature during April - June. Among the three variables, discharge and temperature were respectively the main independent variables in the downstream and the upstream reaches as per a single variable model. Channel width was the variable that distinguished the upstream and downstream reaches of the stream. The implication of the long-term increase in the vegetated area in the Naeseong stream was discussed based on the result of this study.

• Tribology and Lubricants
• /
• 제35권4호
• /
• pp.244-266
• /
• 2019

The purpose of this study is to estimate the wear volumes of engine journal bearings operating at variable angular velocity of a shaft in the beginning of firing start-up cycle. To do this, first we find the potential region of wear scar on engine journal bearings where the applied bearing load and crank shaft velocity are variable. The potential wear regions are discovered by finding minimum oil film thickness at every crank angle existing below most oil film thickness scaring wear (MOFTSW) obtained based on the concept of the centerline average surface roughness. Then we calculate the wear volume from the wear depth and two wear angles decided by the magnitude of each film thickness lower than MOFTSW at every crank angle. The results show that the expected wear region is located at a few bearing angles after and/or behind the upper center of a big-end bearing and the lower center of a main bearing. And the real wear region is similar to the estimated wear region. Further we find that the wear scar on an engine journal bearing may occur at re-starting time after switch-off of a start motor especially under the condition of high oil temperature.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.1005-1009
• /
• 2001

The application of the ultrasonic nozzle has been extended because it is possible atomization of liquid material. In this study, the driving characteristics of the ultrasonic nozzle on the driving circuit were investigated. And the characteristics of the ceramic oscillator were investigated for the temperature stability. The ceramic oscillator were made the Pb[(Sb$\sub$1/2/,Nb$\sub$1/2/)$\sub$0.035/-(Mn$\sub$1/3/Nb$\sub$2/3/)$\sub$0.065/- (Zr$\sub$x/Ti$\sub$l-x/)$\sub$0.9/]O$_3$with mole ratio of Zr/Ti. The ceramis oscillator were need the curie temperature of the over 300[$^{\circ}C$] for the temperature stability. When the Zr/Ti ratio was 49/51, it's curie temperature is 322[$^{\circ}C$] and the electromechanical coupling factor(k$\sub$p/) and mechanical quality factor(Q$\sub$m/) showed the values of 0.555, 1,214, respectively The resonance frequency of ceramic oscillator were from 40KHz to 45KHz. So that, the driving circuit were made a possibility that the frequency are variable. The driving current of ultrasonic nozzle showed the value of maximum 80[mA]. Also, The surface temperature of ceramic oscillator showed 80[$^{\circ}C$] at driving time 10[min]. We knew that the ultrasonic nozzle had stabile driving above 10[min.].