• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1657-1664
• /
• 1995

For dynamic analysis of flexible structures, classical linear modeling has been widely used due to its several good aspects. However, it was found that the modeling often lost its accuracy. So, it is important to know the valid range of the modeling before it is used. more complicated modelings are needed to obtain reliable results only outside the valid range of the classical linear modeling. In this study, some rigid body motions of flexible structures which lead to the failure of the classical linear modeling are investigated. Hybrid deformation variable modeling, which is proved to be accurate in previous studies, is used to figure out the valid range of the classical linear modeling through numerical examples.

• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.424-429
• /
• 2011

In this paper, the simulator of an on-line monitoring system for the range extender electric vehicle has been developed. The messages from the four control modules, the air pressure and fuel level sensors data, and the on/off switching states of 31 indicator lamps can be received through the control area network (CAN), and displayed on the graphic panel. The simulator was designed using the four DSP boards, variable resistors, and toggle switches instead of the four control modules, sensors, and switching state of indicator lamps on an actual series hybrid electric vehicle (SHEV) bus, respectively. The performance of the monitoring technologies was verified with the simulator at the laboratory, and then it was tested on an actual SHEV bus. The simulator is very useful at the initial development of the monitoring system at the hybrid-type or electrical vehicles.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.53-54
• /
• 2000

Measurements of the direct current resistivity, on multiwalled carbon nanotubes(MWNT) for field electron emitter source that had been screen printed in a thick film form were made as a function of temperature T in the range of 1.7K-390K. In this measuring temperature range, the electrical resistivity for the MWNT show that the main contribution to the conductivity comes form carries that hop directly between localized states executing variable range hopping processes. This thick-film form system for large area display showed a high bright light emission as well as very low turn-on field as like an individual MWNT system at room temperature. Furthermore, the electron emission characteristics followed well typical Fowler-Nordheim conduction under the vacuum.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.635-636
• /
• 2006

A pulse with modulation(PWM) that keeps a constant angle of dwell and adjust duty ratio is a good method to control a speed of SRM. And a method of one pulse control is proper a operation on range of high speed in SRM for a good energy efficiency. Because PWM method is more safety than one pulse method, conversion of those is best choice according the speed range. So, some algorithm is need for smooth conversion of the mode of control. This paper presents a factor of conversion that proper the conversion of control mode between PWM and one pulse method This factor is from estimation of torque and proper at the variable range of conversion and show the better conversion characteristic than constant factor of conversion.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권4호
• /
• pp.520-527
• /
• 2016

A new dual-loop digital delay-locked loop (DLL) using a hybrid (binary + sequential) search algorithm is presented to achieve both wide-range operation and high delay resolution. A new phase-interpolation range selector (PIRS) and a variable successive approximation register (VSAR) algorithm are adopted to resolve the boundary switching and harmonic locking problems of conventional digital DLLs. The proposed digital DLL, implemented in a $0.18-{\mu}m$ CMOS process, occupies an active area of $0.19mm^2$ and operates over a wide frequency range of 0.15-1.5 GHz. The DLL dissipates a power of 11.3 mW from a 1.8 V supply at 1 GHz. The measured peak-to-peak output clock jitter is 24 ps (effective pk-pk jitter = 16.5 ps) with an input clock jitter of 7.5 ps at 1.5 GHz. The delay resolution is only 2.2 ps.

• Journal of Power Electronics
• /
• 제15권1호
• /
• pp.123-130
• /
• 2015

This paper investigates the high efficiency operation of a switched reluctance generator over a wide speed range. The system efficiency is improved by optimizing the current shape. A modified angle position control (MAPC) method that can be used to optimize the current shape over a wide speed range is proposed. Simulation and experimental results are presented to validate the effectiveness of the proposed control scheme.

• 한국진공학회지
• /
• 제7권s1호
• /
• pp.1-6
• /
• 1998

The influence of the order-disorder structural transition on the magnetic and mageto-optical, and transport properties of Fe-Al and Co-Al alloy films has been investigated. The disordered states in the alloy films were prepared by vapor quenching deposition on glass substrates cooled by liquid nitrogen. The experimental study of the magento-optical properties of the ordered and disordered Fe-Al and Co-Al alloy films has been carried out in 1.05-5.0 eV energy range at room temperature. The transport properties have been measured in 2-300K temperature range with and without magnetic field of 0.5T. The influence of the order-disorder structural transition on the magnetic and magneto-optical properties was discussed by using the effective medium approximation and the structural defect approach. That on the temperature dependence of the resistivity was analyzed in a framework of the partial localization of the electronic states and the variable range hopping conductivity.

• 성인간호학회지
• /
• 제24권3호
• /
• pp.294-304
• /
• 2012

Purpose: The purpose of this study was to examine the effects of taping therapy on the range of motion and pain of shoulders, physical functions and depression among hospitalized patients with stroke a geriatric hospital. Methods: The study design was a none equivalent control group pre-post test quasi-experimental design. The participants were 25 patients for experimental group and 25 patients for the control group. The period of this study was from March to July 2010. The twenty minute taping therapy was performed for twice a week for eight weeks. Results: The results showed that taping therapy was effective in range of motion shoulders (flexion: t=-5.81, p =.001, abduction: t=-3.69, p =.001) and pain of shoulders (rest: t=3.18, p = .003, movement: t=2.97, p =.005), grip (t=-3.22, p =.002) and balance (t=3.20, p =.002), and depression (t=3.24, p =.002). The variable of ADL (t=-1.99, p =.052) was not significant. Conclusion: The results of the taping therapy increased range of motion shoulders and grip and balance of physical functions, and decreased pain in shoulders and depression. The findings support that taping therapy can be used as a nursing intervention for stroke patients in practical nursing and communities.

• 한국항공우주학회지
• /
• 제39권6호
• /
• pp.487-497
• /
• 2011

자동회전 상태로 속도 증가 시 로터 속도의 변화와 피치 범위를 조사하기 위하여 수치 해석을 수행하였다. 정상 자동회전 상태를 구하기 위하여 과도모사법(Transient Simulation Method:TSM)을 사용하였다. 풍속의 증가에 대응하기 위하여 로터 블레이드를 2차원 압축성 Navier-Stokes 솔버로 해석하여 공력계수를 계산하였고 이를 과도모사법에 사용하였으며 유도 속도장 변화를 모사하기 위하여 Pitt/Peters 유도속도 이론을 적용하였다. 설정된 토크 평형 조건에서 풍속, 샤프트각, 피치각의 조합을 출력하여 로터의 회전속도와 변수의 범위를 조사하였다. 깃 끝 마하수의 변화에 따른 로터 회전속도의 변화를 살펴보았고 샤프트각의 감소에 따른 피치각의 트림 범위를 고찰하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.29-30
• /
• 2012

In this paper, a performance of bi-directional DC/DC converter using PFM control at whole load range is analyzed. A bi-directional DC/DC converter using PFM control in this paper can be soft switching operation with LC series resonant circuit. It's difficult to expect a high efficiency at whole load range in general resonant converter because of limitation of soft switching area. Therefore converter used in this paper has a variable frequency PFM control to overcome a limitation of soft switching area and it makes a high efficiency at whole load range by implementing a soft switching at light load area of restricted soft switching. The high efficiency at whole load range is verified by simulation and experimental result.