• 한국항공운항학회지
• /
• 제18권4호
• /
• pp.1-8
• /
• 2010

In the aerospace field, the study on a morphing-wing is in progress to improve flight performance and perform multi flight mission. There are many concepts of morphing-wing such as camber-change, wing-twist, variable-span, and so on. In this study, the aerodynamic characteristics and flight control of an air vehicle with a variable-span morphing wing (VSMW) have been investigated. VSMW with symmetric span control(SSC) can increase cruising range of aircraft by reducing drag in various flight condition. VSMW with anti-symmetric span control(ASSC) can be used in the roll control of an aircraft. The flight control about pure rolling dynamic system and full dynamic system have been performed about the cruise missile.

• International Journal of Precision Engineering and Manufacturing
• /
• 제9권1호
• /
• pp.7-11
• /
• 2008

A new continuously variable transmission (CVT) for electric bicycles was developed using a traction drive mechanism with inner and outer spherical rotors. This electric bicycle CVT permits three propulsion modes: human-power only, motor-power only, or a combination of motor power and human power. In addition, the electric bicycle CVT has high power efficiency, large torque capacity, improved drivability, and good packageability. A prototype was manufactured based on a conceptual design, a performance analysis, and a detailed design. This prototype has a rated power of 250 W and input motor speed of 20 rad/s for an overall speed ratio in the range 0.3-1.2. A bench test was conducted to measure the power transmission performance of the prototype.

• 한국소음진동공학회논문집
• /
• 제14권9호
• /
• pp.837-845
• /
• 2004

A variable friction damper for vehicle driveline has been proposed. This new torsional damper system uses a solenoid as an actuator to vary friction force of the damper. To verify the idea of using a solenoid in a variable damper system, the test fixture and the dampers are made and tested. Also, to find out the range of damper friction forces that influence the vehicle driveline vibration, a mathematical model of the driveline had been developed and simulated. Test and simulation results show that, within electric current used in the vehicle electric system, the solenoid can develop enough friction force that will surpass resonance in the driveline of 1.5 L Gasoline engine vehicle during acceleration.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권4호
• /
• pp.46-49
• /
• 2012

The selection of the temperature sensor in the cryogenic system depends on the temperature range, shape and accuracy. The accuracy of the temperature sensor is essential to improve the reliability of experiment. We have developed the variable temperature cryostat using a two-stage cryocooler. In order to reduce heat load, thermal shield is installed at the first stage with MLI (Multiple layer insulation). We have also developed the sensor holder calibrating more than twenty sensors at the same time for saving time and money. The system can calibrate sensor at variable temperature by controlling electric heater. In this paper, we present design and fabrication of variable temperature cryostat and representative result of Cernox sensor calibration.

• 교육시설
• /
• 제12권6호
• /
• pp.5-17
• /
• 2005

The purpose of the study is to propose architectural design standards of the Multi-purpose Auditorium planning in educational facilities. The success of the design is measured by how well variable elements are applied to parts of Multi-purpose Auditorium and designed and equipped so that all groups-amateurs, professionals, youth, and adult alike-may use it effectively. The use of this facility will extend over a wide range, including concerts, plays, motion pictures, forums, and other forms of presentation. The wall, stage, roof, windows, and furnitures are important parts of Multi-purpose Auditorium and variable elements can applied to these parts. To successfully application of variable elements, it is necessary that these elements are considered in planning phase including time schedule planning. Various elements are permit a more informal and flexible arrangement and extensive learning activity.

• International Journal of Automotive Technology
• /
• 제6권5호
• /
• pp.467-473
• /
• 2005

A continuously variable transmission (CVT) with an inner spherical traction drive was conceptually designed for bicycle usage. The range of the overall speed ratio is from 1.0 to 4.5. The rated power and pedal speed are 100 Watts and 6 rad/s, respectively. The peculiar packageability, high-level power efficiency and high torque capacity were considered in the design process. A compact CVT that can be installed within a $244\times125\times160mm^3$ space and is above 0.9 in efficiency for the rated values was numerically designed. The distribution of efficiency according to the input torque and input speed were calculated. Gradeability in the prescribed operation mode was simulated.

• International journal of advanced smart convergence
• /
• 제13권2호
• /
• pp.94-102
• /
• 2024

This study examines the factors influencing loyalty to cultural arts events using data from the Survey Report on National Culture and Arts Activity in 2022 and 2023. The dependent variable is a binary variable representing the intention to revisit in the future, which serves as a proxy for loyalty. Given that the dependent variable is binary, the logit model specification is employed to estimate the average marginal effects. The estimation results indicate that audience satisfaction exerts the strongest influence on loyalty in both years. It can be observed that participation in cultural arts events is the second most important variable in determining loyalty. This suggests that the government should support the expansion of the scope of these activities and the diversification of programs in order to facilitate greater participation in a wider range of cultural arts activities.

• 전자공학회논문지
• /
• 제51권12호
• /
• pp.90-95
• /
• 2014

본 논문에서는 다양한 모바일 TV 규격을 지원할 수 있는 모바일 TV 튜너용 VHF 및 UHF 대역 가변 이득 저잡음 증폭기를 제안한다. 제안한 VHF 대역 가변 이득 증폭기는 외부 매칭 소자를 제거하기 위해 저항 피드백을 이용하여 저잡음 증폭기와 저주파수 잡음 특성을 개선하기 위해 PMOS 입력을 사용하는 싱글-차동 증폭기, 이득 범위를 제어하기 위해 저항 피드백 부분과 감쇄기로 구성된다. 제안한 UHF 대역 가변 이득 증폭기는 잡음 특성과 외부 간섭 신호 제거 특성을 향상시키기 위해 협대역 저잡음 증폭기와 $g_m$ 가변 방식을 이용하여 이득을 제어할 수 있는 싱글-차동 증폭기와 감쇄기로 구성된다. 제안한 VHF 및 UHF 대역 가변 이득 저잡음 증폭기는 $0.18{\mu}m$ CMOS 공정을 사용하여 설계하였고, 전원 전압 1.8 V에서 각각 22 mA와 17 mA 의 전류를 소모하면서 약 27 dB와 27 dB의 전압 이득, 1.6-1.7 dB와 1.3-1.7 dB의 잡음 지수, 13.5 dBm와 16 dBm의 OIP3의 성능을 보인다.

• 한국항행학회논문지
• /
• 제24권1호
• /
• pp.53-60
• /
• 2020

본 논문에서는 가변 데이터 전송 가능한 텔레메트리 송신기의 구조에 대해 연구하였다. 가변 데이터 전송을 위하여 가변 컷오프 특성을 가지는 VPMF (variable pre-modulation filter)와 가변입력 샘플레이트 변환기 (variable input sample rate converter)가 결합된 구조를 제안한다. VPMF는 일반적인 PMF (pre-modulation filter)와 동일하게 변조 전 신호의 고주파 성분을 억제하여 RF (radio frequency)신호의 대역을 제한하는 특성을 지니며, 추가적으로 입력 데이터율에 따라 가변 컷오프 특성을 갖는다. 가변입력 샘플레이트 변환기는 입력 데이터율 변경 시 추가적인 구조변경 없이 입력 데이터율과 무관하게 출력을 일정한 샘플링 속도로 변환하는 기능을 갖는다. 추가적으로 실시간 변화하는 데이터양에 대응하기 위해 VPMF와 가변입력 샘플레이트 변환기를 능동적으로 제어하는 소프트웨어 프로그램 기법을 제안한다. 제안 방법을 적용하여 시뮬레이션과 실제 제작을 통하여 입력 데이터율 390 kbps ~ 25 Mbps 범위에서 IRIG (inter-range instrumentation group) 표준의 99% 전력 대역폭, null-to-null 대역폭, 1st IMD (inter modulation distortion) 비교 결과 규격을 만족하는 데이터 전송이 가능함을 확인하였다.

• KIEAE Journal
• /
• 제14권3호
• /
• pp.71-77
• /
• 2014

This study aimed at developing and evaluating performance of the two logics for respectively operating two-position- and variable-heating systems. Both logics control the heating system and openings of the double skin facade buildings in an integrated manner. Artificial neural network models were applied for the predictive and adaptive controls in order to optimally condition the indoor thermal environment. Numerical computer simulation methods using the MATLAB (Matrix Laboratory) and TRNSYS (Transient Systems Simulation) were employed for the performance tests of the logics in the test module. Analysis on the test results revealed that the variable control logic provided more comfortable and stable temperature conditions with the increased comfortable period and the decreased standard deviation from the center of the comfortable range. In addition, the amount of heat supply to the indoor space was significantly reduced by the variable control logic. Thus, it can be concluded that the optimal control method using the artificial neural network model can work more effectively when it is applied to the variable heating systems.