• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2021년도 추계학술대회
• /
• pp.144-145
• /
• 2021

Variable range of focal length of Moiré lens is designed to change the phase pattern, which is varifocal lens system using two thin layers with Moiré pattern and suitable to applied to AR/VR system because of the relatively simple structure, large aperture size, and wide variable range. We analyze the change of focal length region according to the phase pattern and verify the design to make the prototype patterns using DOE.

• 한국생산제조학회지
• /
• 제4권2호
• /
• pp.25-30
• /
• 1995

The shifting and steering performance of the tracked vehicle with the hydromechanical continuous variable transmission is analyzed. The simulation results are closely similar to both the vehicle test result, As a result of hydromechanical transmission simulation, power circulation in 2nd and 3rd range is maximum 142% And power flow of mechanical part has the relationship with the effeciency of the vehicle and transmission.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.279-286
• /
• 1998

Fatigue crack propagation behavior for variable load in high strength aluminum alloys was investigated in this study. The materials used in this study are aluminum 7075-T651 and 5052-H32 alloys. Crack length was measured from calibration curve, which was plotted by known crack length and resistance of standard specimens. Load was obtained from linear regression formula. Unloading elastic compliance method was ap;ied to check the crack closure and cracked area.

• 대한수학회논문집
• /
• 제14권4호
• /
• pp.805-814
• /
• 1999

We consider an MMPP/G/1/K finite queue with two-level threshold overload control. This model has frequently arisen in the design of the integrated communication systems which support a wide range applications having various Quality of Service(QoS) requirements. Through the supplementary variable method, se derive the queue length distribution.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.376-379
• /
• 1990

This parer presents a cycloconverter with a LC resonant circuit for a induction motor drive. The cycloconverter can provide variable voltage and frequency three phase output while keeping the input displacement factor at 1.0. The input current wave for is are sinusoidal,and the wide output frequency range is appropriate for variable speed AC motor drives.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1983년도 추계학술발표회논문집
• /
• pp.35-38
• /
• 1983

It is described a novel SAW oscillator which can be varriable its frequenis by using two output IDT. The results show that frequencies staility is good and variable frequencies range can be broaden by design of IDT.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.860-863
• /
• 2003

In this paper high power SMU(Source Measurement Unit) having 50V/1.5A source/measure range has been designed and implemented. The SMU has two operation mode, voltage mode and current mode. The SMU can be used as variable voltage source, variable current source, voltage meter, or current meter. Combining two different unit, output power can be doubled as 100V/1.5A. The developed SMU tan be used many semiconductor testing system and electronic device inspecting system.

• Agricultural and Biosystems Engineering
• /
• 제5권1호
• /
• pp.5-9
• /
• 2004

This study was carried out to develop methods of reducing the effect of solar illumination on pixel gray-levels of machine vision for agricultural field use. Two kinds of monochrome CCD cameras with manual and auto-iris lenses were used to take pictures within a range of 15 to 120 klux of solar illumination. A camera having more precise automatic control functions gave much better result. Four kinds of indices using pixel gray-level of the $99\%$ white DRS (diffuse reflectance standard) as a reference were tried to compensate pixel gray-levels of an image for variable illumination. Coefficients of variation of the indices within a range of illumination were used as a criterion for comparison. The study concluded that an index of (A+B)/A, where A is gray-level of the $99\%$ DRS and B is gray-level of the tested material, gave the best consistency in the range of solar illumination.

• 대한전자공학회논문지SD
• /
• 제48권7호
• /
• pp.23-29
• /
• 2011

본 논문에서는 GPS 수신기를 위한 dB-선형 특성이 개선된 가변 이득 증폭기 회로를 제안한다. 제안된 dB-선형 전류 발생기는 dB-선형성 오차가 ${\pm}0.15$dB 이내로 개선되었다. 개선된 dB-선형 전류 발생기를 사용하여 GPS 수신기를 위한 가변 이득 증폭기를 설계였다. GPS 수신기의 IF 주파수는 4MHz를 가정하였고, 선형성 요구조건을 도출하여 만족하기 위해 최소 이득일때 24dBm의 IIP3를 만족하도록 하였다. 가변이득 증폭기는 3단으로 구성되어 있으며 DC-오프셋 제거 루프를 통하여 회로의 오프셋 전압을 보상하였다. 설계된 가변 이득 증폭기의 이득은 -8dB~52dB의 범위를 가지며 이득의 dB-선형성은 ${\pm}0.2$dB 이내를 충족한다. 3-dB 주파수 대역폭은 이득에 따라 35MHz~106MHz를 보인다. 가변 이득 증폭기는 CMOS 0.18${\mu}m$ 공정을 이용하여 설계되었으며 전력은 1.8V 전원 전압에서 3mW를 소비한다.

• Journal of Biosystems Engineering
• /
• 제42권3호
• /
• pp.127-135
• /
• 2017

Purpose: Purpose: The usability of a mathematical model modified for analysis of the static stability of an asymmetric tractor-harvester system was investigated. Method: The modified asynchronous mathematical model was validated through empirical experiments, and the effects of movements of the center of gravity (CG) coordinates on the stability against lateral overturning were analyzed through simulations. Results: Changes in the lateral overturning angle of the system were investigated when the coordinates of the CG of the system were moved within the variable range. The errors between simulation results and empirical experiments were compared, and the results were -4.7% at the left side overturning and -0.1% at the right side overturning. The asymmetric system was characterized in such a way that the right side overturning had an increase in overturning angle in the (+) variable range, while it had a decrease in overturning angle in the (-) variable range. In addition, the left side overturning showed an opposite result to that of the right side. At the declination angle (296<${\gamma}$<76), the right side overturning had an increase in the maximum overturning angle of 3.6%, in the minimum overturning angle of 20.3%, and in the mean overturning angle of 15.9%. Furthermore, at the declination angle (284<${\gamma}$<64), the left side overturning had a decrease in the maximum overturning angle of 29.2%, in the minimum overturning angle of 44%, and in a mean overturning angle of 39.7%. Conclusion: The modified mathematical model was useful for predicting the overturning angle of the asymmetric tractor-harvester system, and verified that a movement of the CG coordinates had a critical effect on its stability. In particular, the left side overturning was the most vulnerable to stability, regardless of the direction of declination angle.