• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.3
• /
• pp.590-595
• /
• 2008

A new adaptive TMS variable area flow meter that is used to the environment measuring equipment is proposed. This system is consist of a ball moving within the tube line which corresponds to gas flow and photo sensor array which monitoring the movement of ball. This system can monitoring the position of bali in case of the very few gas flow in various levels. And it can automatically adjust the gas flow at the highest and the lowest level to prevent the tube line blockage.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.3
• /
• pp.349-356
• /
• 2015

Remote monitoring partial discharge sensor, equipping with hybrid filter combining optical and electrical noise reduction capabilities and with signal integrating function to calculate total arc energy, was investigated. Hybrid filter showed insensitivity to fluorescent and incandescent lamps under simulated distribution panel condition. Signal integrating function showed selective detection capability corresponding to different arc energy levels, while convention arc sensor had difficulty to discriminate arc energy level due to bursty arc waveform and peak level detection characteristics. The sensor showed possibility for application to remote monitoring partial discharge sensor, since it detected arc energy level corresponding to normal open and close discharge in low voltage 100A MCCB at 2m distance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.4
• /
• pp.846-851
• /
• 2007

The wireless sensor network is one of the most practical and cost-effective solutions for monitoring systems covering wild and wide area such as wildfire monitoring. However, the RF distance between sensor nodes is very short due to the need of low power consumption of the sensor node, so the number of sensor nodes to be deployed in the target area is more than tens of thousands. In this paper, we design and analyze the deployment issues as well as re-deployment problem occurred when the battery is exhausted. We also propose the needs and solutions for coverage problem in dynamic deployment. By the experimental evaluations, we analyze the packet success ratio between sensor nodes under various environments such as obstacles and variable distances.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.1
• /
• pp.63-68
• /
• 2004

In this paper, we propose a method about the extraction of vehicle and tracking trajectory for moving vehicle tracking system in road. This system applied to the monitoring system of the traffic flow for ATMS(advanced traffic management system) of ITS(intelligent transport system). Also, this system can solve the problem of maintenance of loop sensor. And we detected vehicle using differential image analysis. Because of the road environment changes by real time. Therefore, the method to use background image is not suitable. And we used Kalman filter and innovation value and variable search area for vehicle tracking system. Previous method using fixed search area is sensitive to the moving trajectory and the speed of vehicle. Simulation results show that proposed method increases the possibility of traffic measurement more than fixed area traffic measurement system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.5
• /
• pp.1540-1560
• /
• 2022

Latest technological innovation in the development of compact lower power radios has led to the explosion of Internet of Things. With Wi-Fi, Zigbee and other physical layer protocols offering short coverage area there was a need for a RF protocol that had a larger coverage area with low power consumption. LoRa offers Long Range with lower power consumption. LoRa offers point to point and point to multipoint connections. with Single hop communication in place the need for routing protocols are eliminated. LoRa Wide Area Network stack can accommodate thousands of nodes under a single LoRa gateway with a single hop communication between the end nodes and LoRaWAN gateway. This paper takes an experimental approach to analyze the basic physical layer parameters of LoRa and the practical coverage offered by a LoRaWAN under highly dense urban conditions with variable topography. The insights gained from the practical deployment of the LoRaWAN network, and the subsequent performance analysis is used to design a novel public utility monitoring platform. The second half of the papers is designing a robust platform to integrate both existing wired sensor water meters, current and future generation wireless water meters. The Common Automated Metering Platform is designed to integrate both wired sensors and wireless (LoRaWAN and Wi-Fi) supported water meters. This integrated platform reduces the number of nodes under each LoRaWAN gateway and thus improves the scalability of the network. This architecture is currently designed to accommodate one utility application but can be modified to integrate multi-utility applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6B
• /
• pp.728-737
• /
• 2011

For the real time monitoring and tracking of shipping container which is one of the core objects for global logistics, Wireless Ad-Hoc Network technology might be needed in stacking environments such as ports, yards and ships. In this paper, we propose a container network routing protocol suitable for port or yard stacking environments which include some constraints such as shadow area problem from metal material, frequent movement of container, etc. With this protocol in which a mesh network algorithm is applied, every container data packet can be delivered to the sink node reliably even with frequent join/leave of container nodes. As soon as a node on path gets malfunction, alternative backup path is supported with notice to neighbor node, which makes constant total optimal path. We also verified that the performance of proposed protocol is better than AODV, one of previous major MANet(Mobile Ad-Hoc Network) protocol with a function for alternative path, which says the proposed protocol is better for frequent join/leave and variable link quality.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.519-526
• /
• 2016

As marine accidents happen frequently, it is required to establish a marine traffic monitoring system, which is designed to improve the safety and efficiency of navigation in VTS (Vessel Traffic Service). For this aim, recently, X-band marine radar is used for extracting the sea surface information and, it is necessary to retrieve wave information correctly and provide for the safe and efficient movement of vessel traffic within the VTS area. In this paper, three different current estimation algorithms including the classical least-squares (LS) fitting, a modified iterative least-square fitting routine and a normalized scalar product of variable current velocities are compared with buoy data and then, the iterative least-square method is modified to estimate wave information by improving the initial current velocity. Through several simulations with radar signals, it is shown that the proposed method is effective in retrieving the wave information compared to the conventional methods.