• Title/Summary/Keyword: Variable Mold

Search Result 62, Processing Time 0.032 seconds

Control of Fungal Diseases with Antagonistic Bacteria, Bacillus sp. AC-1

  • Park, Yong-Chul-
    • Proceedings of the Korean Society of Plant Pathology Conference
    • /
    • 1994.06a
    • /
    • pp.50-61
    • /
    • 1994
  • Biological control of important fungal diseases such as Phytophthora blight of red pepper, gary mold rot of vegetables, and powdery mildew of many crops was attempted using an antagonistic bacterium, Bacillus sp. AC-1 in greenhouses and fields. The antagonistic bacterium isolated from the rhizosphere soils of healthy red pepper plant was very effective in the inhibition of mycelial growth of plant pathogenic fungi in vitro including Phytophthora capsici, Rhizoctonia solani, Pyricularia oryzae, Botrytis cinerea, Valsa mali, Fusarium oxysporum, Pythium ultimum, Alternari mali, Helminthosporium oryzae, and Colletotrichum gloeosporioides. Culture filtrate of antagonistic Bacillus sp. AC-1 applied to pot soils infested with Phytophthora capsici suppressed the disease occurrence better than metalaxyl application did until 37 days after treatment in greenhouse tests. Treatments of the bacterial suspension on red pepper plants also reduced the incidence of Phytophthora blight in greenhouse tests. In farmers' commercial production fields, however, the controlling efficacy of the antagonistic bacteria was variable depending on field locations. Gray mold rot of chinese chives and lettuce caused by Botrytis cinerea was also controlled effectively in field tests by the application of Bacillus sp. AC-1 with control values of 79.7% and 72.8%, respectively. Spraying of the bacterial suspension inhibited development of powdery mildew of many crops such as cucumber, tobacco, melon, and rose effectively in greenhouse and field tests. The control efficacy of the bacterial suspension was almost same as that of Fenarimol used as a chemical standard. Further experiments for developing a commercial product from the antagonistic bacteria and for elucidating antagonistic mechanism against plant pathogenic fungi are in progress.

  • PDF

The Study on the Detection of Aflatoxins in the Fermentation Products and Cereals (TLC법에 의한 장류 및 공류중의 Aflatoxin검출에 관한 연구)

  • 한양일;김광호;오영복
    • Journal of Environmental Health Sciences
    • /
    • v.5 no.1
    • /
    • pp.46-50
    • /
    • 1978
  • Aflatoxin, a mixture of the at least four toxic and carcinogenic metabolites, is known to be produced by only a few fungi. The toxins were designated aflatoxins because they were produced by the mold Aspergillus flavus(A. flavus). However, at least four other toxins and other species of the genus A. niger, A. parasiticus A. ruber and wentii have been reported to produce aflatoxins. And also the identical compounds may also be produced by molds, the Pencillium. At least four different species of Penicilliurn have been reported to produce aflatoxins (P. citrinurn, P. frequentans, P. puberulurn. and P. variable). So it is now known that the problem of Aflatoxin is not restricted to the single species A. flavus, even though that is a very common mold. Also additional aflatoxins have been discorvered. For sereral years, only four aflatoxins were known: $B_1, B_2, G_1$ and $G_2$, so designated by reason of their fluorescence and chromatographic charateristics. It is now known that there are really two new toxic materials in the milk. During the past year(1966) they were christened aflatoxin $M_1$ and $M_2$, since they were first found in milk. The two other and most recently discorvered aflatoxins were isolated late in 1966 from cultures of A. flavus, and were designated aflatoxin $B_2a$ and aflatoxin $G_2a$. In order to obtain a breaf information about extent of contamination of foodstuffs by aflatoxin which is known to produce eight different mold, aflatoxin detection of cereals and fermented foods on sale, such as polished rice, barley, wheat, wheat flour, lentil, red bean, soy bean, noodle, kochuj ang and Dwenjang (fermented soy bean paste) and chong Kuk, were carried out. The results of this investigation were summarized as follows: The hexane:$CHCl_3$ extracts of polished rice, barley wheat, wheat flour, lentil, red bean, noodle and kochujang yielded fluorescent spots on thin layer plates. However their Rfvalues were different from those of authentic aflatoxins. The fluorescent substances of the extract from soy bean, Dwenjang and chong kuk showed very similar Rf values to those of the standard aflatoxins. By two dimensional thin layer chromatography and comparison of ultra violet absorption spectra, it was found that these fluorescent substances were not aflatoxins. To conclude, aflatoxins themselves were not detected directly in those samples tested.

  • PDF

Diversity and Pathogenicity of Fusarium Species Associated with Grain Mold of Sorghum (수수 이삭곰팡이 증상에서 분리한 Fusarium속 균의 다양성 및 병원성)

  • Choi, Hyo-Won;Hong, Sung Kee;Lee, Young Kee;Kim, Wan Gyu
    • The Korean Journal of Mycology
    • /
    • v.41 no.3
    • /
    • pp.142-148
    • /
    • 2013
  • Sorghum (Sorghum bicolor Moench) was traditionally grown on a small scale, however, at present its cultivation is getting momentum in terms of food and animal feed crop throughtout the Korea. Grain mold symptoms of the plant were frequently observed during disease surveys in Korea from 2007 to 2009. The symptoms were highly variable. Severely infected grain was fully covered with mold and partially infected grain may look normal or discolored. Ninety isolates of Fusarium species were obtained from the diseased plants collected from several locations in the country. Among the collected Fusarium isolates, 41 were identified as Fusarium thapsinum, 23 as F. proliferatum, 12 as F. graminearum, 5 as F. incarnatum, and 3 as F. equiseti based on their morphological and cultural characteristics. Elongation factor 1 alpha gene sequences of the isolates were used for phylogenetic analysis. Analyses of the sequences revealed that the isolates were confirmed to be identical with related species of NCBI GenBank. Pathogenicity tests showed that three dominant species, F. thapsinum, F. proliferatum and F. graminearum were strongly virulent to grains of sorghum. This study is the first report of sorghum grain mold caused by Fusarium species in Korea.

Estimation of VOCs Affecting a Used Car Air Conditioning Smell via PLSR (부분최소자승법을 이용한 중고차 에어컨냄새 원인물질 추정)

  • You, Hanmin;Lee, Taehee;Sung, Kiwoo
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.21 no.6
    • /
    • pp.175-182
    • /
    • 2013
  • Lately, customers think highly of the emotional satisfaction and as a result, issues on odor are matters of concern. The cases are odor of interior material and air-conditioner of vehicles. In particualar, with respect to the odor of air-conditioner, customers strongly claimed defects with provocative comments : "It smells like something rotten," "It smells like a foot odor," "It stinks like a rag." Generally, it is known that mold of evaporator core in the air-conditioning system decays and this produce VOCs which causes the odor to occur. In this study, partial least squares regression model is applied to predict the strength of the odor and select of important VOCs which affect car air conditioning smell. The PLS method is basically a particular multilinear regression algorithm which can handle correlated inputs and limited data. The number of latent variable is determined by the point which is stabilized mean absolute deviations of VOCs data. Also multiple linear regression is carried out to confirm the validity of PLS method.

Thermally-Expandable Molding Process for Thermoset Composite Materials (열팽창 치공구를 이용한 열경화성 복합재료의 성형연구)

  • 이준호;금성우;장원영;남재도
    • Polymer(Korea)
    • /
    • v.24 no.5
    • /
    • pp.690-700
    • /
    • 2000
  • In this study, an elastomer-assistered compression molding process was investigated by experiments as well as modeling for the long-fiber reinforced thermoset composites. The consolidation pressure generated by fixed-volume and variable-volume conditions was thermodynamically derived for both elastomer and curing prepregs, and was compared with the pressure measured during curing of epoxy matrix. Exhibiting non-linear viscoelastic characteristics in the compressive stress-strain tests, the measured stress was well compared with a modifed KWW (Kohlrausch-Williame-Watts) equation, which is based on the Maxwell viscoelastic model. Using the developed model equations, the consolidation pressure generated by the elastomer was successfully predicted for the compression molding process of thermoset composite materials in tile closed mold system.

  • PDF

Occurrence of Powdery Mildew on Tomato Caused by Oidiopsis taurica (L v.) Arnaud (=Leveillula taurica) in Korea (Oidiopsis taurica (L v.) Arnaud (=Leveillula taurica)에 의한 토마토 흰가루병 발생)

  • 강수웅;권진혁;신원교;김희규
    • Korean Journal Plant Pathology
    • /
    • v.11 no.4
    • /
    • pp.380-382
    • /
    • 1995
  • Yellow spot or blotch symptoms on the upper surface of leaf, without the production of velvet-like fungi on the lower surface of leaf as in the gray mold of tomato caused by Cladosporium fulvum, were observed in tomato (cv. Seokwang) plants in May, 1995, in a vinyl-house of the experimental plot of Gyeongnam Provincial Rural Development Administration, Chinju, Gyeongnam, Korea. We identified this disease as powdery mildew of tomato caused by Oidiopsis taurica (L v.) Arnaud (=Leveillula taurica), which was new to Korea. Conidia of the fungus were borne on uni- or bi-septated conidiophores which were developed through the stomata of the tomato leaf. The conidia were slender, clavate and variable in size (31~111.6$\times$13.1 ${\mu}{\textrm}{m}$). The fungal conidia isolated from tomato leaves were inoculated to tomato plants, and the occurrence of the same disease was confirmed based on the symptomatology and the morphology of the pathogen reisolated.

  • PDF

사출성형의 보압과정에 관한 연구

  • 이호상;전형환;한진현;설권;한창훈
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2001.10a
    • /
    • pp.46-50
    • /
    • 2001
  • Due to its ability in producing a net-shape product to high precision in a very shot cycle time, injection molding has become one of the most important polymer-processings in the industry today. Recently the CAE applications in the field of injection molding have provided significant contributions to the mold design and process optimization. As a part of such an application the packing process has been studied using C-PARK. The prediction of pressure variations during post-filling stage for amorphous material has been compared with an experimental observation for a simple rectangular geometry of uniform thickness. And the optimal packing processes were calculated using the cavity pressure curve near the gate. As a case study, a warpage simulation was carried out for a DY-HOLDER with the variable number of gates.

Development of Improved Cutting Force Model for Indexable End Milling Process. (인덱서블 엔드밀링 공정을 위한 향상된 절삭력 모델의 개발)

  • 김성준;이한울;조동우
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2004.10a
    • /
    • pp.237-240
    • /
    • 2004
  • Indexable end mills, which consist of inserts and cutter body, have been widely used in roughing of parts in the mold industry. The geometry and distribution of inserts on cutter body are determined by application. This paper proposes analytical cutting force model for indexable flat end-milling process. Developed cutting force model uses the cutting-condition-independent cutting force coefficients and considers runout, cutter deflection and size effect for the accurate cutting force prediction. Unlike solid type endmill, the tool geometry of indexable endmill is variable according to the axial position due to the geometry and distribution of inserts on the cutter body. Thus, adaptive algorithm that calculates tool geometry data at arbitrary axial position was developed. Then number of flute, angular position of flute, and uncutchip thickness are calculated. Finally, presented model was validated through some experiments with aluminum workpiece.

  • PDF

Fatigue Analysis for Fiber Right Angle Direction of FRP Deck (FRP 바닥판의 섬유직각 방향에 대한 피로해석)

  • Kim, Doo-Hwan
    • Journal of the Korean Society of Safety
    • /
    • v.29 no.6
    • /
    • pp.81-86
    • /
    • 2014
  • Composite materials have high specific stiffness, specific strength than existing concrete or steel materials. It has superior dynamic properties when utilizing advantages of material such as Non-corrosive, light weight, non-conducting and it has superior mold ability which can make variable shapes. Thus, in the construction, for using composite materials as construction materials, the study carried out static strength of fiber right angle direction and fatigue performance of FRP deck member. The study is going to deduct S-N curve by analyzing the results comparatively and estimate long-term durability. From now on, the study is going to provide interpretation of FRP member and basic data of design basis, furthermore providing foundation technique of composite materials' application of structural frame is the goal of this study.

A Study on Diagnostics of Machining System with ARMA Modeling and Spectrum Analysis (ARMA 모델링과 스펙트럼분석법에 의한 가공시스템의 진단에 관한 연구)

  • 윤문철;조현덕;김성근
    • Journal of the Korean Society of Manufacturing Technology Engineers
    • /
    • v.8 no.3
    • /
    • pp.42-51
    • /
    • 1999
  • An experimental modeling of cutting and structural dynamics and the on-line detection of malfunction process is substantial not only for the investigation of the static and dynamic characteristics of cutting process but also for the analytic realization of diagnostic systems. In this regard, We have discussed on the comparative assessment of two recursive time series modeling algorithms that can represent the machining process and detect the abnormal machining behaviors in precision round shape machining such as turning, drilling and boring in mold and die making. In this study, simulation and experimental work were performed to show the malfunctioned behaviors. For this purpose, two new recursive approach (REIVM, RLSM) were adopted fur the on-line system identification and monitoring of a machining process, we can apply these new algorithm in real process for the detection of abnormal machining behaviors such as chipping, chatter, wear and round shape lobe waviness.

  • PDF