• 로봇학회논문지
• /
• 제14권4호
• /
• pp.326-332
• /
• 2019

In the case of conventional soft robots, the basic stiffness is small due to the use of flexible materials. Therefore, there is a limitation that the load that can bear is limited. In order to overcome these limitations, a study on a variable stiffness method has been conducted. And it can be seen that the jamming mechanism is most effective in increasing the stiffness of the soft robot. However, the jamming mechanism as a method in which a large number of variable act together is not even theoretically analyzed, and there is no study on intrinsic principle. In this paper, a study was carried out to increase the stability of the force chain to increase the stiffness due to the jamming transition phenomenon. Particle size variables, backbone mechanisms were used to analyze the stability of the force chains. We choose a jamming mechanism as a variable stiffness method of a soft robot, and improve the effect of stiffness based on theoretical analysis, modeling FEM simulation, prototyping and experiment.

• 로봇학회논문지
• /
• 제14권3호
• /
• pp.186-190
• /
• 2019

When problems occurred in the unstable and/or extreme terrain environment, formal field-driving robots were unable to provide any other options such as the transformation of the wheel and body structure, and so on. For such reason, this paper proposed a novel type of integrated wheel mechanism that can be operated as a conventional driving wheel mode and hybrid wheel-leg mode in order to be negotiated in an unstable terrain environment. The mechanical effect of the proposed variable wheel mechanism was analyzed considering the geometric constraint and power requirement of the actuator for the transformation. In addition, we designed and manufactured the prototype of field-driving robot, which reliably control the variable wheel shape. Finally, the effectiveness of the variable wheel mechanism was verified by preliminary experimental approach.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1141-1142
• /
• 2010

• Advances in aircraft and spacecraft science
• /
• 제9권2호
• /
• pp.103-117
• /
• 2022

In this paper, a novel morphing mechanism using a deployable scissor structure was proposed for a variable camber morphing wing. The mechanism was designed through the optimization process so that the rib can form the target airfoils with different cambers. Lastly, the morphing wing was manufactured and its performance was successfully evaluated. The mechanism of the morphing wing rib was realized by a set of deployable scissor structure that can form diverse curvatures. This characteristic of the structure allows the mechanism to vary the camber that refers to the airfoil's curvature. The mechanism is not restrictive in defining the target shapes, allowing various airfoils and overall morphing wing shape to be implemented.

• 한국정밀공학회지
• /
• 제30권3호
• /
• pp.260-265
• /
• 2013

To increase the machine accuracy by improving the stiffness of spindle bearings, preload was applied to the spindle bearings. The methods of fixed position preload, convertible preload, constant pressure preload, and variable preload are used to apply the preload to the spindle bearing. The previous studies performed by the author of this study were variable preload methods using rubber pressure and centrifugal force based on mechanical systems. This study proposed a toggle joint mechanism that could be applied to variable preload method using centrifugal force and rubber pressure to increase the preload. Also, a finite element analysis was conducted to predict the deformation of the rubber and change of the preload. And the analysis results showed that the preload by the device using rubber pressure only was increased by the toggle joint mechanism using rubber pressure.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.47-53
• /
• 2018

산업용으로 다양한 형태의 로봇팔이 사용되고 있으며, 특히, 다품종 소량생산으로 생산방식의 변화가 이루어지면서 산업현장에서 다양하게 사용이 가능한 그리퍼에 대한 중요성이 높아지고 있다. 이러한 중요성에 기반을 두어 본 연구진은 기존에 연성재질의 비선형성을 이용하여 강성을 변화시킬 수 있는 가변강성 메커니즘 그리퍼를 연구하였다. 시제품을 제작하고 실험을 통해 강성의 변화와 그 유용성을 확인하였다. 그러나 세 개의 가변강성 메커니즘을 배치하여 그리퍼를 설계 및 제작함으로써 물체를 파지하는 상황에 따라 파지를 제대로 하지 못하는 현상이 발생하였다. 또한, 그리퍼 간의 균형이 맞지 않아 물체 파지 시에 파지할 물체가 회전하면서 미끄러지는 경우가 드물게 발생하는 문제가 있었다. 이러한 문제점을 보완하기 위하여 새로운 형태의 그리퍼가 필요하게 되었다. 새로운 형태의 그리퍼를 설계하기 위하여 생체모사기술을 적용하였다. 사람의 손바닥과 파리지옥의 움직임을 통해 영감을 얻어 새롭게 가변강성 소프트 로봇 핸드를 설계하였다. 손바닥이 접히는 메커니즘을 가변강성 그리퍼에 장착된 텐던을 당기는 것과 연동하여 파지 성능을 높일 수 있었다. 가변강성 메커니즘에 파리지옥과 손바닥 형태의 메커니즘을 결합하여 파지 안전성을 높인 소프트 로봇 핸드는 기존의 가변강성 메커니즘 그리퍼보다 다양한 형태와 무게를 가진 물체를 안정적으로 파지하였다.

• 한국자동차공학회논문집
• /
• 제17권5호
• /
• pp.7-15
• /
• 2009

This paper introduces a new variable valve actuation mechanism with movable second cam center. Valve lift and open duration can be continuously varied according to engine speed and load conditions. A new method to analyze the kinematic relations between the first and second cam profiles and valve motion are also introduced. Because of rocker motion of the second cam, conventional motion conversion program could not be used in this problem. An example shows continuous variations of valve motion and adequate ramp incorporation throughout all valve lift modes. Valve acceleration profile at the high lift mode is similar to that of conventional valvetrains. Contact geometry analysis of the mechanism gives basic information on the load conditions between the components.

• 한국정밀공학회지
• /
• 제26권5호
• /
• pp.128-134
• /
• 2009

This paper aims to design a variable-stiffness type economical safety joint for service robots. The safety joint was designed to have a passive shock absorbing mechanism for protecting human from a catastrophic collision under service condition of robots. A simple mechanism composed of two action disks for switching the load transfer, a spring and a screw for pre-load was proposed. In order to evaluate the performance of the safety joint a testing platform which can carry out the static and impact tests was also designed and fabricated. From the test results, the designed safety joint was proved to have a variable load-carrying capacity and about 42% impact absorption capacity with simple manipulation of the control screw.

• 제어로봇시스템학회논문지
• /
• 제15권11호
• /
• pp.1108-1114
• /
• 2009

Mobility is one of the most important features for a guard robot since it should be operated in rough places. A wheel-based mobile robot capable of jumping is an appropriate structure for a guard robot because it can easily satisfy the requirements for small guard robots. The jumping robot can reach a higher place more rapidly than other locomotion methods. This research proposes a small robot equipped with the jumping mechanism based on the conical spring with the variable length endtip. The variable length endtip enables the independent control of the jump force and jump angle which are related to the jump height and jump distance, respectively. Various experiments demonstrated that the proposed jumping mechanism can provide the independent control of jump force and jump angle, and improve the mobility of a small robot to overcome an obstacle. Furthermore, a combination of the jumping mechanism and the PSD sensor to measure the distance to the step enable the jumping robot to autonomously climb stairs.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.822-826
• /
• 2008

A linkage mechanism is a device to convert an input motion into a desired output motion. Traditional linkage mechanism designs are based on trial and error approaches so that size or shape changes of an original mechanism often result in improper results. In order to resolve these problems, an improved automatic mechanism synthesis method that determines the linkage type and dimensions by using an optimization method during the synthesis process has been proposed. For the synthesis, a planar linkage is modeled as a set of rigid blocks connected by zero-length translational springs with variable stiffness. In this study, the sizes of rigid blocks were also treated as design variables for more general linkage synthesis. The values of spring stiffness and the size of rigid block yielding a desired output motion at the end-effecter are found by using an optimization method.