• 전력전자학회논문지
• /
• 제9권4호
• /
• pp.372-380
• /
• 2004

본 논문은 기존의 2개의 전력 처리단을 갖는 컨버터를 단일 전력단으로 구성하고, ZVS기법을 이용한 고역률 단일전력단 고주파 공진 AC-DC 컨버터를 제안하고 있다. 입력단에 승압형 역률개선 인덕터를 연결하여 일정 듀티비와 가변 스위칭 주파수로 입력전류를 불연속 모드로 제어함으로써 입력 역률을 개선하는 것이 가능하였다. 종래의 2개 전력 처리단을 가지는 컨버터의 경우 역률 제어용 스위치가 별도로 필요하지만 전력 처리단을 하나로 단일화 시키므로써 컨버터의 구성이 간략화 되어져, 비용의 저감과 신뢰성을 증가시킬 수 있는 등의 장점이 있다. 본 연구는 고역률 단일전력단 AC-DC 컨버터의 동작원리와 무차원화 파라미터를 이용한 특성평가를 범용성 있게 행하여, 특성평가에서 산출한 특성값을 기초로 하여 실험장치를 제작하였으며, 실험치와 이론치를 비교ㆍ검토하여 제안 회로의 특성해석의 정당성을 입증하고 있다.

• 한국전기전자재료학회논문지
• /
• 제26권11호
• /
• pp.816-820
• /
• 2013

We investigated the characteristics of the silicon oxy-nitride and nitride films grown by plasma-enhanced chemical vapor deposition (PECVD) at the low temperature with a varying $NH_3/N_2O$ mixing ratio and a fixed $SiH_4$ flow rate. The deposition temperature was held at $150^{\circ}C$ which was the temperature compatible with the plastic substrate. The composition and bonding structure of the nitride films were investigated using Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). Nitrogen richness was confirmed with increasing optical band gap and increasing dielectric constant with the higher $NH_3$ fraction. The leakage current density of the nitride films with a high NH3 fraction decreased from $8{\times}10^{-9}$ to $9{\times}10^{-11}(A/cm^2$ at 1.5 MV/cm). This results showed that the films had improved electrical properties and could be acceptable as a gate insulator for thin film transistors by deposited with variable $NH_3/N_2O$ mixing ratio.

• Current Optics and Photonics
• /
• 제8권2호
• /
• pp.162-169
• /
• 2024

This study investigates the temperature sensitivities of fiber Bragg grating (FBG) across a broad temperature spectrum ranging from -196 ℃ to 900 ℃. We developed the FBG temperature measurement system using a high-temperature tubular furnace and liquid nitrogen to supply consistent high and low temperatures, respectively. Our research showed that the FBG temperature sensitivity changed from 1.55 to 10.61 pm/℃ in the range from -196 ℃ to 25 ℃ when the FBG was packaged with a quartz capillary. In the 25-900 ℃ range, the sensitivity varied from 11.26 to 16.62 pm/℃. Contrary to traditional knowledge, the FBG temperature sensitivity was not constant. This inconsistency primarily stems from the nonlinear shifts in the thermo-optic coefficient and thermal expansion coefficient across this temperature spectrum. The theoretically predicted and experimentally determined temperature sensitivities of FBGs encased in quartz capillary were remarkably consistent. The greatest discrepancy, observed at 25 ℃, was approximately 1.3 pm/℃. Furthermore, it was observed that at 900 ℃, the FBG was rapidly thermally erased, exhibiting variable reflected intensity over time. This study focuses on the advancement of precise temperature measurement techniques in environments that experience wide temperature fluctuations, and has considerable potential application value.

• 대한전자공학회논문지SD
• /
• 제49권7호
• /
• pp.1-9
• /
• 2012

기존의 LED 패키지가 갖는 온도에 따른 광 특성 변화 문제를 해결하기 위하여 온도센서가 집적된 LED 패키지 시스템을 제안하였다. 패키지의 온도를 실시간으로 측정하기 위하여 정확도가 우수하며 온도에 따른 저항의 변화가 선형적인 특징을 갖는 온도센서(RTD 형)를 설계하였으며, 장기간의 안정성을 보장하기 위하여 안정된 박막의 증착조건을 결정하고 이를 바탕으로 $1.560{\Omega}/^{\circ}C$의 민감도를 갖는 온도센서를 패키지 내부에 제작하였다. 제작된 패키지를 이용하여 온도에 무관하게 일정한 광량을 나타내는 시스템의 구현을 위하여 변환 회로부와 제어 회로부를 제작하고 이들을 결합함으로써, 패키지의 온도 변화에 따라 PWM duty ratio의 변화를 통해 광 출력을 보상해 주는 시스템을 제안하고 제작하였다. LED의 동작온도인 $0^{\circ}C$에서 $140^{\circ}C$ 범위에서 PWM duty ratio를 관측한 결과 제안했던 일정한 광량을 위한 PWM duty ratio에 매우 근접한 출력 신호를 발생시키는 것을 확인할 수 있었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제21권1호
• /
• pp.1-8
• /
• 2017

형상비(M/VD, shear span-depth ratio)가 4.5인 축소모형의 원형기둥 실험체 3개를 제작하였다. 철근콘크리트 기둥 실험체의 단면은 원형이고 중공단면으로 제작되었다. 철근콘크리트 기둥 실험체의 단면 지름은 400 mm, 중공 지름은 200 mm이다. 일정한 축력 하에서 반복하중을 가력하는 준정적 실험을 수행하였다. 실험체의 주요변수는 횡방향철근비이다. 모든 실험체의 횡방향 나선철근 체적비는 소성힌지 구간에서 0.302~0.604%의 값을 갖는다. 이 값은 도로교설계기준에서 요구하는 최소 심부구속철근 요구량의 45.9~91.8%에 해당하며, 이는 내진 설계가 되지 않은 기존 교각이나 내진설계개념으로 설계되는 교각을 나타낸다. 본 연구의 최종목적은 실험적 기초자료의 제공과 함께 성능단계별 균열거동, 하중-변위 이력곡선, 에너지 소산 능력, 등가점성감쇠비, 잔류변형, 유효강성 등 내진성능의 정량적 수치와 경향을 제공하기 위한 것이다. 본 논문에서는 실험결과를 통해 분석된 실험변수에 따른 실험결과들을 공칭강도, 비선형 모멘트-곡률 해석 결과, AASHTO LRFD 및 도로교설계기준(한계상태설계법)과 같은 기준들과 비교하였다.

• 한국해양학회지
• /
• 제2권1_2호
• /
• pp.24-33
• /
• 1967

본고는 한국연안의 9개검조소 (울릉도, 묵호, 울산, 부산, 진해, 여수, 제주, 목포 및 인천등)의 최근의 월평균해면의 자료를 분석한 성과이다. 평균해면의 변화가 주로 기압 및 바람의 효과, 해수밀도의 변화, 하천유량의 변화 그리고 경도류의 역학적효과등에 기인한다는 것은 여러 해양학자들에 의해 증명되었다. 특히 근래에는 평균해면의 자료를 해황의 변동의 판단에 이용하려고 노력하고 있다. 원래 해양관측은 다액의 경비와 인력을 필요로 하므로 동일해역을 자주 관측한다는 것은 매우 곤란하므로 비교적 용이한 해면의 관측을 통해 해황변동을 파악한다는 것은 매우 흥미있는 사실이라 생각된다. 과거 한국근해의 평균해면에 대한 연구조사는 1930년 소창신길(Ogura,S.)가 원산, 부산, 군산, 인천 및 진남포등의 평균해면의 월편차를 산출발표한것과 금1967년 가을 Listzin, E.가 "도해의 평균해면의 변화"라는 제목의 논문에서 원산 및 부산의 평균해면을 논한 것뿐이다. 그리고 Miyazaki, M.는 1954년 "일본연안의 평균해면의 계절변화"를 연구발표한바 있다. 앞으로 한국연해의 해황판단 에 평균해면자료를 이용시도함에 앞서 우선 평균해면에 미치는 요소를 특히 기압의 영향과 해수밀도의 변화의 효과를 고찰해 보기로 한다.

• 한국인구학
• /
• 제9권1호
• /
• pp.41-53
• /
• 1986

The purpose of this paper is two-fold. One is to investigate the determinants of the demand supply of labor, and another is to project long-term demand and supply of labor. The paper consists of three parts. In the first part, theoretical models and important hypotheses are discussed: for the case of a labor supply model, issues regarding discouraged worker model, permanent wage hypothesis, and relative wage hypothesis are examined and for the case of a demand model, issues regarding estimating an employment demand equation within the framework of an inverted short-run produc- tion function are inspected. Particularly, a theoretical justification for introducing a demographic cohort variable in a labor supply equation is also investigated. In the second part, empirical results of the estimated supply and demand equations are analyzed. Supply equations are specified differently between primary and secondary labor force. That is, for the case of primary labor force groups including males aged 25 and over, attempts are made to explain the variations in participation behavior within the framework of a neo-classical economics oriented permanent wage hypothesis. On the other hand, for the case of females and young male labor force, variations in participation rates are explained in terms of a relative wage hypothesis. In other words, the participation behavior of primary labor force is related to short-rum business fluctuations, while that of secondary labor force is associated with intermediate swings of business cycles and demographic changes in the age structure of population. Some major findings arc summarized as follows. (1) For the case of males aged 14~19 and 2O~24 groups and females aged 14∼19, the effect of schhool enrollment rate is dominant and thus it plays a key role in explaining the recent declining trend of participation rates of these groups. (2) Except for females aged 20∼24, a demographic cohort variable, which captures the impact of changes in the age structure on participation behavior, turns out to show positive and significant coefficients for secondary labor force groups. (3) A cyclical variable produce significant coefficients for prime-age males and females reflecting that as compared to other groups the labor supply behavior of these groups is more closely related to short-run cyclical variations (4) The wage variable, which represents a labor-leisure trade-off turns out to yield significant coefficients only for older age groups (6O and over) for both males and females. This result reveals that unlike the experiences of other higer-income nations, the participation decision of the labor force of our nation is not highly sensitive with respect to wage changes. (5)The estimated result of the employment demand equation displays that given that the level of GNP remains constant the ability of the economy to absord labor force has been declining;that is, the elasticity of GNP with respect to labor absorption decreasre over time. In the third part, the results of long-term projections (for the period of 1986 and 1995) for age-sex specific participation rates are discussed. The participation rate of total males is anticipated to increase slightly, which is contrary to the recent trend of declining participation rates of this group. For the groups aged 25 and below, the participation rates are forecast to decline although the magnitude of decrease is likely to shrink. On the other hand, the participation rate of prime- age males (25 to 59 years old) is predicted to increase slightly during 1985 and 1990. For the case of females, except for 20∼24 and 25∼34 age groups, the participation rates are projected to decrease: the participation rates of 25∼34 age group is likely to remain at its current level, while the participation rate of 20∼24 age group is expected to increase considerably in the future (specifi- cally, from 55% in 1985 to 61% in 1990 and to 69% in 1995). In conclusion, while the number of an excess supply of labor will increase in absolute magnitude, its size as a ratio of total labor force is not likely to increase. However, the age composition of labor force is predicted to change; that is, the proportion of prime-age male and female labor force is projected to increase.

• 공업화학
• /
• 제7권5호
• /
• pp.877-887
• /
• 1996

산소 전극 시스템에 사용되는 합성막은 산소에 대해 선택적인 투과를 해야 하며, 화학적으로 불활성이고 또한 우수한 기계적 강도를 가져야 한다. 본 실험에서는 산소 전극에 적합한 막 제조에 목표를 두고, 열적 안정성과 기계적 강도가 우수한 polysulfone을 막 재료로 선택하였다. 막 제조시 용매로서 THF, NMP 그리고 methylene chrolide를 사용하여, 용매에 따른 막의 특성 변화를 조사하였다. PSf막을 통한 산소와 질소의 투과도 계수는 각각 가압법과 전기화학적 방법으로 측정하였으며, 가압법에 의해 측정한 산소의 투과도 계수가 약 20% 큰 값을 나타내었다. 가압법에 의한 투과 실험 결과, 공급부의 압력이 증가함에 따라 산소와 질소의 투과도 계수는 약간 감소하였으며, 이러한 거동은 유리상 고분자막을 통한 기체의 투과에서 일반적으로 나타난다. 한편 용매로서 methylene chrolide를 사용한 PSf막의 고분자 함량을 변화시켜 실험한 결과, 큰 차이를 나타내지 않았다. 산소 전극에의 PSf막의 밀착 문제를 완화하고자 막의 유연성을 향상시키기 위해 가소제로서 TCP를 첨가하여 막을 제조 하였으며, 가소제를 소량 첨가했을 때, 투과 특성에는 큰 영향을 미치지 않고, 막의 유연성이 증가됨을 알 수 있었다. 본 실험에서 제조한 PSf막의 산소 전극에의 사용 가능성을 조사하기 위해 PSf막을 산소 전극에 설치하여 실험하였다. -0.3~-1.0V에서 전류의 변화가 plateu를 나타내었으며, 산소 분압과 전류의 상관계수가 0.99949로서 PSf막을 산소전극에 적절하게 사용할 수 있으리라 생각된다.

• 한국산업보건학회지
• /
• 제25권3호
• /
• pp.301-311
• /
• 2015

Objectives: Operators of overhead traveling crane in a ship assembly factory perform work to transmit large vessel blocks to an appropriate working process. Hazardous matters such as metal dusts, carbon monoxide, carbon dioxide, ozone, loud noise and fine particles are generated by variable working activities in the factory. The operators could be exposed to the hazardous matters during the work. In particular, welding fumes comprised of ultra fine particles and heavy metals is extremely hazardous for humans when exposing a pulmonary through respiratory pathway. Occupational lung diseases related to welding fumes are increasingly on an upward tendency. Therefore, the objective of this study is to assess properly unknown occupational exposure to the welding fumes among the operators. Methods: This study intended to clearly determine an equivalence check whether or not chemical constituents and composition of the dusts, which existed in the driver's cab, matched up with generally known welding fumes. Furthermore, computational fluid dynamics program(CFD) was used to identify a ventilation assessment in respect of a contamination distribution of welding fumes in the air. The operators were investigated to assess personal exposure levels of welding fumes and respirable particulate. Results: The dust in an operation room were the same constituents and composition as welding fumes. Welding fumes, which caused by the welding in a floor of the factory, arose with an ascending air current up to a roof and then stayed for a long time. They were considered to be exposed to the welding fumes in the operation room. The personal exposure levels of welding fumes and respirable particulate were 0.159(n=8, range=0.073-0.410) $mg/m^3$ and 0.138(n=8, range=0.087-0.178) $mg/m^3$, respectively. They were lower than a threshold limit value level($5mg/m^3$) of welding fumes. Conclusions: These findings indicate that an occupational exposure to welding fumes can exist among the operators. Consequently, we need to be keeping the operators under a constant assessment in the operator process of overhead traveling crane.

• Ocean and Polar Research
• /
• 제30권4호
• /
• pp.519-536
• /
• 2008

The relatively tranquil area within the Gogunsan Archipelago was for the first time investigated preliminarily with respect to modern sedimentological processes in association with the emplacement of the Saemangeum Dyke. Basic sedimentological observations, bathymetry and surface sediments were performed twice during 2006-2008 to compare the results and elaborate changes during that period of time. In addition, sediment dynamical observations were carried out with latest measuring equipment along two transects crossing the entrances of the archipelago, including 12-hour onboard measurements of current, suspended sediments, temperature, and salinity. This dataset was used to reveal hydrodynamic characteristics for spring season April-May and to estimate the direction and relative magnitude of the net flux of suspended sediments. There occurred three depositional areas (A to C) within the archipelago, where sediment texture was also changed. In area A, around Yami Island and the dyke, and area B, in the center of the archipelago, surface sediments became coarsened over the two-year period; sand content increased 5% at the expense of silt content in the former, whereas silt content increased 3% at the expense of clay content in the latter. By comparison, area C in the western entrance of the archipelago shows a textural trend of fining with more silt and clay (combined increase of 5%) at the expense of sand content. The accumulation of sediments in areas A and B is attributable to the sand and silt resuspended from the seabed sediments off sector 4 of the dyke during the winter. The origin of the fine materials depositing on area C is uncertain at present, although suspended sediments moving offshore around the archipelago may be one of the most likely candidates for the source. The temperature of seawater increased rapidly from $9-10^{\circ}C$ in April to $14-16^{\circ}C$ in May, whereas salinity remained more or less constant at 31-32%o during the two months. Both of these parameters showed little variations with depth through a tidal cycle, suggesting good mixing of seawater without any help of significant waves. The consistency of salinity during a tidal cycle also indicates no insignificant effects of freshwater from the rivers Mangyung and Donjin emitting through the opening gap near Sinsi Island. The suspended sediment concentrations were higher at the entrance between Sunyu and Sinsi islands than at the entrance between Hoenggyong and Sinsi islands, ranging from 20 and 30 mg/l and from 5 and 15 mg/l, respectively at the sea surface. Although tidal currents were variable across a transect between Sunyu and Sinsi islands, the currents across the entrance between Hoenggyong and Sinsi islands flowed consistently in the same direction all over the transect during a tidal cycle. The estimation of net flux of suspended sediments indicates that suspended sediments are transferred to the Gogunsan Archipelago mainly through a relatively deep trough adjacent to Sinsi Island toward the shallow area around Yami Island and the dyke.