• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.211-219
• /
• 1998

Propellants pressurized and fed into the combustion chamber undergoes the mechanical, chemical combustion processes. Along with their distinctive physical characteristics, propellant combustion is typically divided into the processes; injection, atomization, mixing, vaporization and chemical reaction. These processes assumed to happen in a serial manner are strongly coupled, thereby involves formidable physical complexities. In this study a numerical experiment is attempted to simulate the burning sprays due to OFO, FOF triplet / FOOF split doublet injectors. Based on Eulerian-Lagrangian frame, Navier-Stokes equation system for compressible flows is preconditioned with low Reynolds number $k-{\varepsilon}$ turbulent model and time-integrated by LU-SGS, and the sprays are described by DSF model with the characteristics initialized by experimentally determined spray characteristics. Simplified single global reaction model approximates heptane-air reaction. It was observed that FOOF split doublet injector shows better atmization with shortest residence and the FOF triplet injector produces better combustion performance.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.9 no.2
• /
• pp.147-151
• /
• 1998

Primary localized laryngeal amyloidosis is an uncommon disorder of unknown cause that occurs in the absence of systemic amyloidosis or associated disease. There is a risk of either missing concomitant systemic amyloidosis or exhaustively investigating for this when it is not present through failure to appreciate the nature of the disease. We present 2 cases of primary localized laryngeal amyloidosis in supraglottic region. Biopsy of the mass of patients revealed findings consistent with amyloidosis, which were Congo red reaction with a apple green birefringence in polarized light fluorescence microscopy. An extensive workup for systemic amyloidosis was negative. All of two cases were treated by vaporization via $CO_2$ LASER using "Swiftlase Flshscan" for creating a wide, shallow char-free treatment site by precisely controlling ablation depth without causing residual thermal damage to tissue. The postoperative recovery of all cases was uneventful with good vocal quality and no aspiration. At the present time, the patients have no evidence of disease, recurrence and complication.

• Journal of Mechanical Science and Technology
• /
• v.18 no.5
• /
• pp.865-876
• /
• 2004

A new concept of reduced quasi-dimensional combustion model for a direct injection diesel engine is developed based on the previously developed quasi-dimensional multi-zone model to improve the computational efficiency. In the reduced model, spray penetration and air entrainment are calculated for a number of zones within the spray while three zones with aggregated spray zone concept are used for the calculation of spray combustion and emission formation processes. It is also assumed that liquid phase fuel appears only near the nozzle exit during the breakup period and that spray vaporization is immediate in order to reduce the computational time. Validation of the reduced model with experimental data demonstrated that the new model can predict engine performance and NO and soot emissions reasonably well compared to the original model. With the new concept of reduced model, computational efficiency is significantly improved as much as 200 times compared to the original model.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.4
• /
• pp.463-470
• /
• 1985

In this study a parametric analysis for the rewetting temperature was made with 572 data obtained from the single tube experiment. The rewetting temperature was also evaluated by measuring the vaporization time of a liquid drop on a hot surface at the elevated pressures. The results showed that the rewetting temperature increased with flooding rate, inlet subcooling pressure and initial wall temperature, and decreased with increasing axial elevation. Based on the results obtained, the rewetting temperature correlation was suggested. From the comparison of correlated rewetting temperatures with measured values, it showed that the correlated values fell within .+-.5% error from the measured values.

• Journal of the Korean Society of Combustion
• /
• v.3 no.2
• /
• pp.51-63
• /
• 1998

Air-assisted atomizer flames are investigated numerically to study spray structures in nonburning and burning conditions based on experimental data. A PDA is used to measure droplet size, velocity, and number density for both nonburning and burning spray. Computations utilize time-averaged gas-phase equations and $k-{\varepsilon}$ turbulence model for simplicity. The major features of the liquid-phase model are that a SSF approach is used to represent the effect of gas-phase turbulence on droplet trajectories and vaporization, an infinite-diffusion model is employed to represent the transient liquid-phase process. Computation and experiment results show that the droplet acceleration and evaporation proceed quickly in near the atomizer, characterizing high number densities and a strong convective effect. The primary combustion zone, however, is dorminated by the gas phase reaction and exhibits a sheath combustion.

• Journal of the Korean Society of Combustion
• /
• v.5 no.1
• /
• pp.81-89
• /
• 2000

An experimental study has been carried on single fuel droplets of water-in-light oil emulsions in an electric furnace to elucidate the dominant factor for the occurrence of micro-explosions. The tests were carried out by changing the following four parameters; the surfactant, the ratio of water to light oil, ambient temperature in electric furnace, and four kinds of fuels having different viscosity(light-oil, kerosene, iso-octane, bunker fuel). The result shows that micro-explosion phenomena is dominated without surfactant and below 30% of water content. Explosion-time is affected by ambient temperature and viscosity of used fuel.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.4
• /
• pp.514-522
• /
• 1999

The laser-induced plasma affects greatly on the results of welding process. moreover selective evaporation loss of alloying elements leads to change in chemical composition of weld metal as well as the mechanical properties of welded joint. this study was undertaken to obtain a fundamental knowledge of pulsed laser welding phenomena especially evaporation mechanism of different aluminum alloys. The intensities of molecular spectra of AlO and MgO were different each other depeding on the power density of a laser beam Under the low power density condition the MgO band spectrum was predominant in intensity while the AlO spectra became much stronger with an increase in the power density. These behaviors have been attributed to the difference in evaporation phenomena of Al and Mg metals with different boiling points and latent heats of vaporization. The time-averaged plasma temperature and electron number density were determined by spectroscopic methods and consequently the obtained temperature was $3,280{\pm}150K$ and the electron number density was $1.85{\times}10^{19}\;l/m^3$.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2006.11a
• /
• pp.29-32
• /
• 2006

Experimental test results of field construction, Cheongju University Educational Liberal Art Building, applying the insulating curing method on slab concrete showed that the quality of concrete in fresh and hardened state satisfied all target values. Temperature history of slab concrete in A and B area secured more than $7.8{\sim}9.2^{\circ}C$ higher than outside atmosphere. After completing certain curing period of time on the surface of the structure, crack occurrence was not found. It is concluded that the preventing vaporization of moisture by the insulating curing method reduces plastic and drying shrinkage as welt as improves durability.

• Journal of Energy Engineering
• /
• v.17 no.2
• /
• pp.47-53
• /
• 2008

The objective of this paper is to clarify the flow characteristic, velocity distribution, pressure loss, and other such fundamental data for the canister during loading and purging. The amount of gas that is loaded increases as the loading rate is decreased and the time increased, and the purging improves as the purge rate is increased. The hydrocarbons that are purged initially have a high concentration, and a large amount is purged. During loading and purging, the temperature initially increases and decreases drastically due to heat generation and heat loss.

• Resources Recycling
• /
• v.1 no.1
• /
• pp.37-43
• /
• 1992

The submerged injection smelting process was performed to recover Zn and Pb from steel dust throuth vaporization and to investigate the effect of temperature, slag composition, injection time, gas flow rate, etc. on the recoveries of valuable metals. The results show that vaporation rates of zinc and lead increased at higher temperture and higher moral ratio of ferrous to ferric oxides. In the initial stage of submerged injection of nitrogen gas, the molten slags of the dust have high value of molar ratio of $Fe^{2+}$/$Fe^{3+}$ and hence zinc and lead can be effectively recovered.