Browse > Article

Reduced Quasi-Dimensional Combustion Model of the Direct Injection Diesel Engine for Performance and Emissions Predictions  

Jung, Dohoy (Department of Mechanical Engineering, The University of Michigan)
Assanis, Dennis N. (Department of Mechanical Engineering, The University of Michigan)
Publication Information
Journal of Mechanical Science and Technology / v.18, no.5, 2004 , pp. 865-876 More about this Journal
Abstract
A new concept of reduced quasi-dimensional combustion model for a direct injection diesel engine is developed based on the previously developed quasi-dimensional multi-zone model to improve the computational efficiency. In the reduced model, spray penetration and air entrainment are calculated for a number of zones within the spray while three zones with aggregated spray zone concept are used for the calculation of spray combustion and emission formation processes. It is also assumed that liquid phase fuel appears only near the nozzle exit during the breakup period and that spray vaporization is immediate in order to reduce the computational time. Validation of the reduced model with experimental data demonstrated that the new model can predict engine performance and NO and soot emissions reasonably well compared to the original model. With the new concept of reduced model, computational efficiency is significantly improved as much as 200 times compared to the original model.
Keywords
Diesel; Emissions; Quasi-dimensional; Multi-zone; Combustion model; Simulation;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 A Proposal for Diesel Spray Moder Using a TAB Breakup Model and Discrete Vortex Method /
[ Yeom,J.K.;Lee,M.J.;Chung,S.S.;Ha,J.Y.;Senda,J.;Fujimoto,H. ] / KSME In ternational Journal   과학기술학회마을
2 Yeom, J. K., Lee, M. J., Chung, S. S., Ha, J. Y., Senda, J. and Fujimoto, H., 2002, 'A Proposal for Diesel Spray Model Using a TAB Breakup Model and Discrete Vortex Method,' KSME International Journal, Vol. 16, No. 4, pp. 532-548   DOI
3 Amsden, A. A., Ramshaw, J. D., O'Rourke, P. J., and Dukowicz, J.K., 1985, 'KIVA : A Computer Program for Two-and Three-Dimensional Fluid Flow with Chemical Reactions and Fuel Sprays,' Los Alamos National Laboratory Report, LA-10245-MS
4 Assanis, D. N. and Heywood, J. B., 1986, 'Development and Use of a Computer Simulation of the Turbocompounded Diesel System of Engine Performance and Component Heat Transfer Studies,' SAE paper 860329
5 Hiroyasu, H., Kadota, T. and Arai, M., 1983, 'Development and Use of a Spray Combustion Modeling to Predict Diesel Engine Efficiency and Pollutant Emissions (Part 1 Combustion Modeling),' Bulletin of the JSME, Vol. 26, No. 214, pp. 569-575   DOI
6 Heywood, J. B., 1988, Internal Combustion Engine Fundamentals, McGraw-Hill Book Co.
7 Jung, D. and Assanis, D. N., 2001, 'Multi-Zone DI Diesel Spray Combustion Model for Cycle Simulation Studies of Engine Performance and Emissions,' SAE Trans.: Journal of Engines, Vol. 110, No. 3, pp. 1510-1532   과학기술학회마을
8 Burt, R. and Troth, K. A., 1970, 'Penetration and Vaporization of Diesel Fuel Sprays,' Institution of Mechanical Engineers
9 Chiu, W. S., Shahed, S. M. and Lyn, W. T., 1976, 'A Transient Spray Mixing Model for Diesel Combustion,' SAE Paper 760128
10 Hyroyasu, H. and Arai, M., 1980, 'Fuel Spray Penetration and Spray Angle of Diesel Engines,' Trans. of JSAE, Vol. 21, pp. 5-11
11 Im, Y. H. and Huh, K. Y., 2000, 'Phenomenological Combustion Modeling of a Direct Injection Diesel Engine with In-Cylinder Flow Effects,' KSME International Journal, Vol. 14, No, 5, pp. 569-581   DOI
12 Kim, H. S. and Sung, N. W., 2001, 'Multi-dimensional Engine Modeling : NO and Soot Emissions in a Diesel Engine with Exhaust Gas Recirculation,' KSME International Journal, Vol. 15, No. 8, pp. 1196-1204
13 Lavoie, G. A., Heywood, J. B. and Keck, J. C., 1970, 'Experimental and Theoretical Investigation of Nitric Oxide Formation in Internal Combustion Engines,' Combust. Sci. Technol., Vol. 1, pp. 313-326   과학기술학회마을   DOI   ScienceOn
14 Nehmer, D. A. and Reitz, R. D., 1994, 'Measurement of the Effect of Injection Rate and Split Injections on Diesel Engine Soot and NOx Emissions,' SAE Paper 940668
15 Watson, N., Pilley, A. D. and Marzouk, M. A., 1980, 'Combustion Correlation for Diesel Engine Simulation,' SAE Paper 800029
16 Newman, J. A. and Brzustowski, T. A., 1971, 'Behavior of a Liquid Jet Near the Thermodynamic Critical Region,' AIAA journal, Vol. 9, No. 8
17 Nishida, K. and Hiroyasu, H., 1989, 'Simplified Three-Dimensional Modeling of Mixture Formation and Combustion in a D.I. Diesel Engine,' SAE Paper 890269
18 Waldman, C. H., Kau, C. J. and Wilson, R. P., Jr., 1974, 'Prediction of Transient Temperature Fields within a Vaporizing/Burning Fuel Droplet under High Ambient Pressure,' Western States Section, Combustion Institute, California State University at Northridge