• 한국산업융합학회 논문집
• /
• 제12권3호
• /
• pp.137-142
• /
• 2009

Burning velocity of methane-air mixtures with water vapor have been measured to study the process of flame propagation using schlieren photographs and computation. The computations were carried out for the burning velocity using premix code of Chemkin program to compare the experimental results. The quantity of water vapor contained were changed 5% and 10% of total mixtures, and equivalence ratio of mixtures between 0.8 and 1.2 were tested under the ambient temperature 323K and 373K. The results showed little difference between these two methods, the burning velocity was decreased by increasing the water vapor contents due to the interruption of flame development. And, the effect of ambient temperature was less significant by increasing the water contents on the burning velocity.

• 한국산업융합학회 논문집
• /
• 제11권1호
• /
• pp.5-10
• /
• 2008

A flame speed of methane mixture of water vapor and air have been measured to study the process of flame propagation using schlieren photographs. The quantity of water vapor contained were changed 5% and 10% of total mixture, and equivalence ratio of mixture between 0.8 and 1.2 were tested under the ambient temperature 323K and 373K. The results showed that the burning velocity was decreased by increasing the water vapor contents due to the interruption of flame development. And, the reduction rate of burning velocity was smaller by increasing the water contents under the same ambient temperature. The effects of ambient temperature on burning velocity was decreased by increasing the water vapor contents.

• 한국진공학회지
• /
• 제12권4호
• /
• pp.228-234
• /
• 2003

전자빔으로 증발시킨 gadolinium(Gd) 원자증기의 속도를 미량 저울(microbalance)을 사용하여 측정하였다. 증발 표면의 온도가 2400-2500 K인 조건에서 약 900 ㎧의 속도가 측정되었다. 이 값은 단열팽창을 하는 이상적 단원자의 최대 속도에 비해 약 100 ㎧ 더 빠른 속도에 해당된다. 이 특이 현상의 원인을 고온에서 여러 개의 들뜬 에너지 준위에 분포한 Gd 원자의 내부 에너지가 단열팽창 중에 운동 에너지로 전환되는 것으로 설명하였다. 100개의 들뜬 에너지 준위를 원자증기의 엔탈피에 포함시켜 속도를 계산한 값이 실험 결과와 비교적 일치함을 보였다. 가열된 표면 온도의 변화에 따른 원자증기의 유동 특성에 대해서도 보고한다.

• 한국산업융합학회 논문집
• /
• 제9권3호
• /
• pp.229-233
• /
• 2006

The water vapor permeability of polypropylene spun bond non-woven fabrics were investigated with the water vapor permeability velocity at $20^{\circ}C$, $30^{\circ}C$ and $40^{\circ}C$ by applying the hygroscopic method. At each temperature 50, 65 and 80 %RH conditions were used. The results indicated that the water vapor permeability velocity increased with increasing the water vapor concentration difference between both sides of sample surfaces and it decreased with increasing the number of the piled-up fabrics and the apparent density.

• 한국유체기계학회 논문집
• /
• 제17권3호
• /
• pp.33-40
• /
• 2014

In this study, a new model for calculating the liquid film thickness and condensation heat transfer coefficient in a vertical condenser tube is proposed by considering the effects of gravity, liquid viscosity, and vapor flow in the core region of the flow. In order to introduce the radial velocity profile in the liquid film, the liquid film flow was regarded to be in Couette flow dragged by the interfacial velocity at the liquid-vapor interface. For the calculation of the interfacial velocity, an empirical power-law velocity profile had been introduced. The resulting liquid film thickness and heat transfer coefficient obtained from the proposed model were compared with the experimental data from other experimental study and the results obtained from the other condensation models. In conclusion, the proposed model physically explained the liquid film thinning effect by the vapor shear flow and predicted the condensation heat transfer coefficient from experiments reasonably well.

• 멤브레인
• /
• 제22권5호
• /
• pp.369-380
• /
• 2012

본 연구에서는 직접 접촉식 막증류 공정에서 운전인자에 따른 담수 투과량과 열효율을 예측하기 위해 열 및 물질전달 방정식을 이용하여 1차원 해석모델을 개발하였다. 이 해석모델의 타당성을 검증하기 위해 해석모델 결과와 기존 연구자들에 의해 수행된 실험 결과를 비교하였고 만족할 만한 결과를 얻었다. 이를 통해 DCMD 모듈에서 염수와 증류수의 입구온도 및 입구속도가 담수 투과량 및 열효율에 미치는 영향을 분석하였다. 그 결과 염수의 입구온도와 입구속도가 증류수의 입구온도와 입구속도보다 담수 투과량과 열효율 증가에 미치는 영향이 크기 때문에 지배적인 운전특성이라는 것을 알 수 있었다. 염수의 입구온도가 $60^{\circ}C$에서 $95^{\circ}C$로 증가할 때 담수 투과량이 21.22 $kg/m^2h$에서 71.26 $kg/m^2h$로 3.4배 증가하였고 열효율은 0.556에서 0.765로 37.5% 증가하였다. 한편, 염수의 입구속도가 60에서 300 m/h로 증가함에 따라 담수 투과량이 27.91 $kg/m^2h$에서 36.33 $kg/m^2h$로 30% 증가하였고 열효율은 0.6에서 0.646로 7.5% 증가함을 알 수 있었다.

• 설비공학논문집
• /
• 제12권3호
• /
• pp.235-243
• /
• 2000

A theoretical model for laminar filmwise condensation along an isothermal vertical wall at constant pressure has been formulated on the basis of conservation laws and other fundamental physical principles. The model was applied to the prediction of the influences of variable thermophysical properties of liquid and vapor layers in the filmwise condensation of superheated vapor of Rl2, R134a, R142b and R152a. The dimensionless velocity component method was employed in the transformation of the governing equations and their boundary conditions, and the polynomial method was used for treating variable thermophysical properties of liquid and vapor. Physical quantities, such as the dimensionless thickness of the liquid layer, local heat transfer rate and mean heat transfer coefficient, were investigated for different values of the superheated temperature of the stagnant vapor far from the wall. It was found that the value of mean heat transfer coefficient of R134a was higher than other refrigerants for the change of the superheated temperature.

• International Journal of Automotive Technology
• /
• 제2권3호
• /
• pp.109-115
• /
• 2001

A study has been conducted to clarify the effect of watery vapor concentration in hot ambient on droplet evaporation. Droplets of water, ethanol, n-hexadecaneand n-heptane were used in this experimental study. Ambient conditions are fixed at 470 K in temperature, 0.1 MPa in pressure and 2 m/s in velocity of ambient air. Watery vapor concentration was changed 0%～40% by 10% by add water to air. To obtain the time histories of droplet diameter after exposed in ambient, a suspended droplet in hot and humid ambient stream was synchronized with a back flash light, and enlarged droplet images were taken by a CCD camera. The evaporation rate constant of water droplet decreases slightly with the vapor concentration because diffusion velocity reduction of droplet vapor occurs on the surface. The values of ethanol and n-heptane droplet actively increase by effect that water from condensation of vapor flows into the droplet. The evaporation rate constant of n-hexadecane which has higher boiling point than water increases within around 30% of the concentration.

• Nuclear Engineering and Technology
• /
• 제31권1호
• /
• pp.29-48
• /
• 1999

Local two-phase flow parameters of subcooled flow boiling in inclined annulus were measured to investigate the effect of inclination on the internal flow structure. Two-conductivity probe technique was applied to measure local gas phasic parameters, including void fraction, vapor bubble frequency, chord length, vapor bubble velocity and interfacial area concentration. Local liquid velocity was measured by Pilot tube. Experiments were conducted for three angles of inclination; 0$^{\circ}$(vertical), 30$^{\circ}$, 60$^{\circ}$. The system pressure was maintained at atmospheric pressure. The range of average void fraction was up to 10% and the average liquid superficial velocities were less than 1.3 m/sec. The results of experiments showed that the distributions of two-phase How parameters were influenced by the angle of channel inclination. Especially, the void fraction and chord length distributions were strongly affected by the increase of inclination angle, and flow pattern transition to slug flow was observed depending on the How conditions. The profiles of vapor velocity, liquid velocity and interfacial area concentration were found to be affected by the non-symmetric bubble size distribution in inclined channel. Using the measured distributions of local phasic parameters, an analysis for predicting average void fraction was performed based on the drift flux model and flowing volumetric concentration. And it was demonstrated that the average void fraction can be more appropriately presented in terms of flowing volumetric concentration.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.124-129
• /
• 2000

The flow of liquid and vapor is investigated in trapezoidal grooves. The effect of variable shear stress along the interface of the liquid and vapor is studied for both co-current and counter-current flows. Velocity contours and results fur the friction are obtained for both trapezoidal grooves. An approximate relation that was previously utilized for the friction for the liquid was modified to obtain accurate agreement with the results for trapezoidal grooves.