• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제28회 추계학술대회
• /
• pp.365-370
• /
• 1998

This paper reports on the measurement of the vane motion in a positive displacement small vane pump. The capacitive method using ceramic vane is proposed to measure the vane motion. This method enables us to measure only radial motion of the vane regardless of the motions of other directions. With simple experiments and solutions of simultaneous equations, the indirect compensation of measured signal was performed.

• 대한조선학회논문집
• /
• 제50권4호
• /
• pp.248-254
• /
• 2013

In this paper, we establish an analysis algorithm and a design procedure for a Vane-Wheel which is a freely rotating device behind a propeller, by using a panel method. Vane-Wheel's function is to extract energy from the propeller slipstream in turbine part which is inner part of the Vane-Wheel, and convert this energy into an additional propulsive thrust in propeller part which is outer part of the Vane-Wheel. Two parts must satisfy torque balance and thrust has to act to the ship's forward direction. A Vane-Wheel has large interaction effect with propeller since it is placed behind of the propeller. Therefore, in order to consider interaction effect correctly, incoming velocity to the Vane-Wheel in a circumferential mean wake was calculated considering induced velocity from propeller to the Vane-Wheel. Likewise, incoming velocity to the propeller was calculated considering induced velocity from the Vane-Wheel to the propeller. This process is repeated until a converged result is obtained.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제25회 춘계학술대회
• /
• pp.204-209
• /
• 1997

This paper reports on the theoretical study of the vane motions in a positive displacement vane pump. Vane detachment cause the pressure fluctuation, noise, wear in cam ring, and decrease the volumetric efficiency. Dynamic equation of vane motion and flow continuity equation have been modeled and solved simultaneously using 4th order Runge-Kutta method. As results of analysis, vane detachment occurs due to pressure overshoot by excess compression in the pumping chamber. Amount of vane detachment has been reduced by decreasing the pressure overshoot.

• Nuclear Engineering and Technology
• /
• 제33권3호
• /
• pp.327-338
• /
• 2001

A computational fluid dynamics (CFD) analysis was performed to propose the optimum design of flow mixing vane on the space grid in a PWR fuel assembly. The flow mixing vanes considered in this study for optimum design are swirl-vane and twisted-vane. A single subchannel of one grid span was modeled using flow symmetry to minimize the computational effort. The CFD predictions are in good agreement with the experimental results for the split- vane, which shows the applicability of the CFD method. The mixing effect by swirling flow and crossflow, and the pressure drop were estimated and compared for the various vane angles. The optimum vane angle is proposed to be 40。 and 35。 from the direction of axial flow for the swirl-vane and the twisted-vane, respectively.

• 한국추진공학회지
• /
• 제9권1호
• /
• pp.9-16
• /
• 2005

제트베인은 로켓추진기관의 발사초기 자세제어와 조정 안정성의 확보를 위해 로켓노즐 출구부에 장착되어지며, 발사 수초 후까지 연소가스와의 접촉으로 인해 구동부를 가열시키고, 그 자체도 화학적 혹은 기계적으로 삭마된다. 본 연구는 제트베인의 열해석을 위한 기초연구로서 균일 초음속 유동장내에 위치한 단일 제트베인으로의 열전달 특성 해석을 수행하여 보았다. 경계층 적분법과 유한차분법의 연립해석이 이루어 졌으며, 벽근방에서 도출된 경계조건을 바탕으로 베인 내부의 비정상 열전도 해석도 수행되었다.

• 드라이브 ㆍ 컨트롤
• /
• 제10권3호
• /
• pp.7-13
• /
• 2013

Hydraulic vane pumps are widely used in various hydraulic systems because of its compactness and light weight. It is well known that the vanes and cam ring are separated by very thin liquid films which result in the EHL state. Contrary to the case of cylindrical roller bearings, the inlet and side boundary pressures are much higher than the atmospheric pressure. In this paper, a numerical solution of the EHL of finite line contacts between the cam ring and vane tip with profiled ends is presented. Using a finite difference method with non-uniform grids and the Newton-Raphson method, converged solutions are obtained for moderate load and material parameters. The EHL pressure distribution and film shape are considerably affected by pump delivery pressure and the side boundary condition applied. Both the maximum pressure and the minimum film thickness always occurred near the edge regions. The present results can be used in the design of optimum vane profile in hydraulic vane pump.

• 한국식품과학회지
• /
• 제32권4호
• /
• pp.974-978
• /
• 2000

다섯 종류의 시판 고추장에 대한 항복응력은 vane 방법에 의해 controlled shear-rate 조건에서 측정되었다. Vane 항복응력은 전단속도와 전단응력 데이터의 외삽법(extrapolation)에 의해 결정된 Casson 항복응력 보다 높은 수치를 보여주었다. 고추장의 구조가 손상되지 않은 시료와 이미 손상된 시료에 대해 vane 방법에 의해 정적항복응력$({\sigma}_s)$과 동적항복음력$({\sigma}_d)$이 각각 측정되었으며 큰 수치 차이로부터 고추장에 대한 구조파괴 정도를 결정하는 데 있어 vane 방법이 적합함을 알 수 있었다. ${\sigma}_{ov}({\sigma}_{s},\;{\sigma}_{d})$와 ${\sigma}_{oc}$ 수치 사이에는 좋은 상관관계를 보여주고 있으며 ${\sigma}_{d}$ 수치는 외삽법에 의해 얻어진 ${\sigma}_{oc}$ 수치와 잘 일치함을 나타냈다. ${\sigma}_{s}$와 ${\sigma}_{d}$의 비율로부터 얻어진 무차원 yield number$(N{\sigma}_{o})$는 고추장의 일시적 구조 존재여부를 결정하는데 사용될 수 있다. $N{\sigma}_{o}$로부터 계산된 fator ${\varepsilon}$의 수치$({\varepsilon}=0.100-0.169)$로부터 고추장은 강한 결착구조를 형성하고 있는 분산식품임을 알 수 있었다.

• Journal of Mechanical Science and Technology
• /
• 제20권12호
• /
• pp.2242-2249
• /
• 2006

The rolling piston type rotary compressor has been widely used for refrigeration and air-conditioning systems due to its compactness and high-speed operation. The present analysis is part of a research program directed toward maximizing the advantages of refrigerant compressors. The study of lubrication characteristics in the critical sliding component is essential for the design of refrigerant compressors. Therefore, theoretical investigation of the lubrication characteristics of a rotary compressor being used for refrigeration and air-conditioning systems was investigated. The Newton-Raphson method was used for a partial elastohydrodynamic lubrication analysis between the vane and the rolling piston of a rotary compressor. The results demonstrated that the vane thickness and the center line position of the vane significantly influenced the friction force and the energy loss between the vane and the rolling piston.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1998년도 제27회 춘계학술대회
• /
• pp.206-211
• /
• 1998

This paper presents the deformation characteristics of cam ring in a balanced type vane pump. Cam ring is operated in the condition of high pressure. Therefore the local deformation of cam ring affects the characteristics of compression, vane motion and noise and vibration. We analyzed the deformation of cam ring in three types by using the finite element method. As results of analysis, deformed shape of cam ring and the effects of deformation on the compression are presented.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제25회 춘계학술대회
• /
• pp.136-141
• /
• 1997

Rotary compressor is one of the most useful mechanism that is widely applied in refrigeration and air-conditioning systems. That is due to character of rotary compressor -compact, simple etc.While there is a lot of strong points, there is room for improvement because it is composed of many parts which have wear problem, friction losses and leakage. In this paper, theoretical investigation about vane and slot parts at which we observe severe wear is carried out. Through the study of lubrication, the behavior of vane during one cycle can be predicted and the cause of wear at slot will be discovered. To solve the equations, fletcher-powell method is applied. The result of analysis show that vane bevell to the slot part with discharge port before rotation of shaft is 180 degree and bevell to the slot part with suction port after 180 degree. The motion of vane is divided 3 mode that depends on behavior of vane. This paper define the first mode when vane tilt to the compression chamber, the second mode when vane tilt to the suction chamber, and the third mode when vane move straightway.