• Journal of Advanced Marine Engineering and Technology
• /
• 제19권2호
• /
• pp.1-9
• /
• 1995

The processing paper has devoted to the theory of the flow equations, the basic derivative procedure, the meaning of a valve flow coefficient $C_v$, the valve Reynolds R$R_{ev}$ and its application for liquid control valves, which applicable under the condition of a non-critical flow and the case of piping geometry factor $F_p$=1.0. However there is no information on the effects of fittings, a critical flow and the flow resistance coefficient of a valve equivalent to that of pipe which is conveniently used in the piping design. Since the piping systems of plants or ships generally contain various fittings such as expanders and reducers due to different size between pipes and valves and there may occur a critical flow, that a mass flowrate is maintained to be constant, due to the pressure drop in a piping when a liquid is initially maintainder ar a saturated temperature or at nearby corresponding to upstream pressure, system designer should have a knowledge of the effect to flow due to fittings and the critical flow phenomenon of a liquid. This study is performed to inform system designers with the critical flow phenomenon of a liquid, a valve resistance coefficient, a valve geometry factor and their applications.

• 한국유체기계학회 논문집
• /
• 제10권1호
• /
• pp.49-55
• /
• 2007

An 'Y' strainer type automatic flow rate regulating valve, which functions are to remove impurities from hot water inside the pipe and to maintain a constant flow rate regardless of variations of the differential pressure between valve inlet and outlet at the same time, is developed for distributing hot water equally to several pipes with district heating or central heating system. Numerical analysis of the three dimensional turbulent flow field in a valve shape is carried out to confirm the flow field whether the designed regulator shape is acceptable or not. The final developed valve improves installation time and cost and maintenance ability comparing with set-up 'Y' strainer and regulator separately. Tolerance for the nominal flow rate is also satisfied within ${\pm}5%$.

• 한국음향학회지
• /
• 제43권1호
• /
• pp.112-121
• /
• 2024

배관시스템은 유체를 장거리로 이송시키는 장비로서 많은 산업군에서 사용되고 있다. 고압의 배관에서는 빠른 유속으로 인하여 소음이 크게 발생하고 있으며, 이러한 소음을 저감 시키기 위한 많은 연구가 수행되고 있다. 이 논문에서는 고온·고압의 배관내 밸브 유동을 원인으로 발생하는 유동유발진동과 음향유발진동을 설계단계에서 예측하고 정량적으로 분석을 위한 배관 소음 해석 기법을 개발하였다. 이를 위하여 배관의 내부 유동 예측을 위한 고정밀 유동 해석기법을 개발하였으며, 파수-주파수 분석법을 이용하여 주파수 대역별 압축성/비압축성 압력의 기여도를 평가하였다. 그리고 유한요소 해석법(Finite Element Method, FEM)을 기반으로 한 저·중 주파수 대역의 진동소음 해석기법을 개발하였으며, 통계적 에너지 분석법(Statistical Energy Analysis, SEA)을 기반으로 한 중·고 주파수 대역에서의 방사소음해석 기법을 개발하였다.

• 한국음향학회지
• /
• 제36권5호
• /
• pp.314-320
• /
• 2017

일반적으로 감압밸브는 고압 가스에 의한 배관 파손을 방지하기 위해 설치된다. 그러나 감압 밸브를 지나면서 발생하는 급격한 압력 저하는 음향파의 형태로 전파되는 큰 음향 에너지를 발생 시키며, 하류 방향으로 전파되면서 배관의 벽면을 진동시키는 가진원으로 작용하여 배관의 파손을 유발한다. 따라서, 본 연구에서는 단순 수축-확장 배관을 대상으로 LES(Large-Eddy Simulation)기법과 파수-주파수 분석을 통해 유동장 내 비압축성 압력섭동과 압축성 압력 섭동을 분리하고, 밸브 유동에 의한 내부 유동소음을 예측하였다. 수치해석의 수렴성을 향상시키기 위해 먼저 정상상태 Reynolds-Averaged Navier-Stokes 방정식을 해석하여, 고정확도의 비정상 LES해석의 초기 값으로 활용하였으며, 비정상 유동장 결과로부터 파수-주파수 분석을 실시하였다. 파수-주파수 분석을 통해 비압축성 압력섭동과 압축성 압력섭동을 분리하였으며, 이를 통해 배관 내 음향유기진동에 의한 소음원 정보를 정확히 제공할 수 있음을 확인하였다.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권2호
• /
• pp.51-61
• /
• 2001

A numerical study has been conducted to characterize the transient pressure in a simple water supply pipe system with an air chamber by utilizing a commercial code that employs the method of characteristics. Some results produced for validation in the study agree quite well with the previously reported. Several parameters are than varied. Among them are the valve closure time, the wave speed, the static pressure, the polytropic exponent, the air chamber volume, the diameter and the shape of orifice in the air chamber, etc, while the water temperature and velocity are kept constant at $20^\circ{C}$ and 0.8m/s, respectively. Results reported in this parametric study may be useful to understand the unsteady behavior of the system.

• 해양환경안전학회지
• /
• 제12권4호
• /
• pp.267-272
• /
• 2006

버터플라이 밸브는 선박에서 냉각수와 유류 계통 등에 범용으로 널리 사용되고 있다. 이 연구에서는 유량조정에 따른 배관계통의 버터플라이밸브 후류 유동특성을 규명하기 위하여 입자영상 유속측정장치를 이용하여 밸브개도에 따른 유선과 속도벡터 분포에 관한 정량적인 데이터를 확보하였다. 또한 밸브 주위 유동장의 압력성분을 고찰하기 위하여 개폐각도를 6가지 경우로 변화시켜 정압을 측정하였다. 그 결과 실험관 벽면에서 측정된 압력의 분포는 디스크가 전개 상태인 $0^{\circ}$에서 $45^{\circ}$까지는 입구 압력은 일정한 상태로 거의 변화하지 않았으나 약 $60^{\circ}$ 이상에서부터 압력 상승과 점차 급격한 변동현상이 나타났다. 특히, $75^{\circ}$ 부근에서는 상류에서 급격한 압력 상승 경향을 보인 반면 하류 측은 압력변동이 적게 나타났다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제30권3호
• /
• pp.382-388
• /
• 2006

This study experimented to understand the effect of transporting ice slurry through in pipe with valve. And at this experiment it used ethylene glycol-water solution and a concentration is 30wt%. The experimental apparatus was constructed of ice slurry generation tank, turbo flow meter, manometers for differential pressure measuring, PIV system for flow pattern measuring. illumination and along a horizontal circular tube with valve as test section. The experiments were carried out under various conditions, with velocity of fluid at the entry ranging from 0.5 to 1.5 m/s and concentration of IPF is 30%. Also valve open rate is 50%, 75%, 100%.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1997년도 제26회 추계학술대회
• /
• pp.232-238
• /
• 1997

In this paper, a theoretical method is presented to design a hydraulic control valve system that consist of an important component in the hydraulic snubber. The hydraulic snubber is used essentially to support the piping systems at power plants. To calculate the force due to pressure drop and flow rate in the valve orifice and by-pass hole, Bernoulli equation is used. The Reynolds equation are numerically analyzed in the clearance gap between the valve cone and valve seat to estimate the friction force and leakage flow rate. Based on the detailed theoretical data, we developed successfully the hydraulic snubber for power plants.

• International Journal of Fluid Machinery and Systems
• /
• 제3권1호
• /
• pp.58-66
• /
• 2010

A steam control valve is used to control the flow from the steam generator to the steam turbine in thermal and nuclear power plants. During startup and shutdown of the plant, the steam control valve is operated under a partial flow conditions. In such conditions, the valve opening is small and the pressure deference across the valve is large. As a result, the flow downstream of the valve is composed of separated unsteady transonic jets. Such flow patterns often cause undesirable large unsteady fluid force on the valve head and downstream pipe system. In the present study, various flow patterns are investigated in order to understand the characteristics of the unsteady flow around the valve. Experiments are carried out with simplified two-dimensional valve models. Two-dimensional unsteady flow simulations are conducted in order to understand the experimental results in detail. Scale effects on the flow characteristics are also examined. Results show three types of oscillating flow pattern and three types of static flow patterns.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.487-490
• /
• 2010

A fluid transient analysis on the pipe network of bipropellant propulsion system is conducted through numerical parametric studies in which unsteady friction results are compared with quasi-steady friction results and also show the pressure drop results during the liquid apogee engine firing. The fluid transient analysis program has verified through comparing with the original Zielke model, the full and recursive convolution model and quasi-steady model as a reference. And the pressure drop program also has verified through comparing with results of the well-known program, EPANET2. The bipropellant propulsion system has two different fluids as fuel and oxidizer, and mostly they are hypergolic combination so that the valve opening and closing of the thrusters, that cause the pressure waves, shall take place simultaneously to get proper performance. The different physical properties of the fuel and oxidizer result in the different responsive to the same valve opening and closing. The response results may be helpful to know the characteristics of the bipropellant propulsion system and design it.