• 대한기계학회논문집B
• /
• 제32권1호
• /
• pp.39-46
• /
• 2008

The loss coefficient of the butterfly valve which allows partial opening of the valve at closed position and is applicable to the small-sized pipe system with the diameter of 1 inch was measured for the variation of the valve disk blockage ratio. Two different types of the valve disk configuration to adjust the blockage ratio were considered. One was the solid type valve disk of which the diameter was changed into the smaller size rather than the pipe diameter, and the other was the perforate type valve disk on which some holes were perforated. The results from two types of valve disk were compared to identify their characteristics in the loss coefficient distributions. The loss coefficient and the controllable angle of the valve disk were decreased exponentially with the decrease of the blockage ratio. In addition, the perforate valve disk had the effect on the higher loss coefficient rather than the solid type valve disk.

• 수산해양기술연구
• /
• 제23권1호
• /
• pp.30-38
• /
• 1987

좁은 틈새를 가진 원판밸브의 추력에 대한 이론적 해석 및 실험 결과로부터 다음과 같이 요약할 수 있다. 1. 원판 밸브의 틈새가 비교적 작은 경우(H/D sub(1)가 0.1 이하) 즉, 유량이 적을 때에는 점성류가 지배적이고 이론식으로부터 추력을 높게 예측할 수 있었다. 2. 압력의 영향에 대한 추력은 입구 압력이 낮을수록 이론결과와 실험결과가 잘 일치하고 높을수록 관성의 영향이 크게 나타나는 경향을 보였다. 3. 밸브 크기 변화에 대한 추력의 영향은 D sub(2)/D sub(1)=>4.6에서는 포물선적으로 감소하고 그 이하에서는 직선적으로 감소하였다.

• 대한기계학회논문집B
• /
• 제24권2호
• /
• pp.260-269
• /
• 2000

Oil-film flow visualizations and three-dimensional flow measurements have been conducted in the downstream region of a butterfly-type valve used in air-conditioning systems, with the variation of a disk open angle. The flow visualizations in the flow symmetry plane show that there are a pair of counter-rotating separation/recirculation zones as wall as two jet-like near-wall flows. These flow disturbances are strongly depends on the disk open angle. Based on the flow visualization, a qualitative flow model is suggested in the near-field and downstream region of the valve disk. For a small disk open angle, the mean velocities and turbulent intensities have relatively small values in the near-field of the valve disk, but they do not show uniform distributions even in some downstream region. With an increment of the disk open angle, mean velocity variations and turbulent intensities are greatly increased in the immediate downstream region, but uniform distributions are quickly resumed as departing from the valve disk. The mass flow rate remains nearly constant for the disk open angles less than 30 degrees, meanwhile it strongly depends on the disk open angles between 45 and 75 degrees. The pressure loss is found to be about zero for the disk open angles less than 45 degrees, but is substantially increased for those larger than 75 degrees.

• 한국정밀공학회지
• /
• 제21권12호
• /
• pp.140-145
• /
• 2004

In this study, the design and analysis of a butterfly valve disk was performed to minimize the rubbing between the disk and the seat at opening and closing. The butterfly valve has double eccentric structure and the contact surface between the disk and the seat is a conical surface. At the instant of opening and closing the valve by the rotation of disk, the positions of zero contact point are changed. Also, if the cone surface is cut in the perpendicular direction to the rotation axis of the valve, the contour of cutting section is hyperbolic. Therefore minimum distance between the origin of the eccentric axis and the hyperbolic curve goes to the position of zero contact point. In order to consider the interferences between the disk and the seat, the thermal-structure coupled field analysis was performed by ANSYS.

• 한국정밀공학회지
• /
• 제15권3호
• /
• pp.61-67
• /
• 1998

Rapid prototyping becomes widely used in design and manufacturing of mechanical and aerospace engineering. Here a drag valve disk consisted of complicate configuration has designed by CAD, and prototyped by a stereolithography apparatus (SLA) to confirm the design configuration. Also the prototyped valve disk was used for checking if it could be applied for casting from the view point of accuracy, cost, and time. The rapid-prototyped disk by SLA was compared with a high-speed machined disk by MAKINO V55, and it is found that the prototyping of the disk by SLA appears more economical, more accurate and faster than by machining with MAKINO V55.

• Tribology and Lubricants
• /
• 제20권5호
• /
• pp.231-236
• /
• 2004

Sulfur Hexafluoride, S $F_{6}$ is widely used for leak detection and as a gaseous dielectric in transformers, condensers and circuit breakers. S $F_{6}$ gas is also effective as a cleanser in the semiconductor industry. This paper presents a numerical study of the sealing force of disk type seal in S $F_{6}$ gas safety valve. The sealing force on the disk seal is analyzed by the FEM method based on the Taguch's experimental design technique. Disk seals in S $F_{6}$ gas safety valve are designed with 9 design models based on 3 different contact length, compressive ratio and gas pressure. The calculated results of Cauchy stress and strain showed that the sealing characteristics of Teflon $^{ }$PTFE is more effective compared to that of FKM(Viton), which is related to the stiffness of the materials. And also, the contact length of the disk seal is important design parameter for sealing the S $F_{6}$ gas leakage in the safety valve.afety valve.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 추계 학술대회논문집
• /
• pp.177-180
• /
• 2007

A three dimensional numerical analysis has been made for the cone disk control valve and the flat disk control valve. The simulation of the incompressible flow in the each control vale are performed by using the commercial code. Six flow cases of each control valve are investigated.

• 한국항공우주학회지
• /
• 제36권1호
• /
• pp.14-21
• /
• 2008

밸브 디스크 직경이 25.4 mm 인 소형 버터플라이밸브의 유동특성이 다양한 밸브 닫힘각에 대해 실험적으로 연구되었다. 밸브 디스크각이 작은 경우 유량조절특성을 향상시키기 위해 주어지는 밸브 닫힘각을 0$^{\circ}$, 5$^{\circ}$, 10$^{\circ}$, 20$^{\circ}$, 30$^{\circ}$로 변화시켜 밸브 디스크각에 따른 손실계수를 측정하였다. 또한 밸브선단 형상이 손실계수 변화에 미치는 영향을 조사하였다. 밸브 닫힘각이 증가함에 따라 최대손실계수는 감소하며, 밸브 닫힘각 0$^{\circ}$~5$^{\circ}$에서 가장 큰 감소를 나타냄을 알 수 있었다. 밸브 디스크 형상에 따른 손실계수는 밸브 닫힘각이 0$^{\circ}$인 경우 날카로운 모서리를 갖는 디스크가 더 큰 손실계수를 나타낸 반면, 닫힘각 10$^{\circ}$의 경우 날카로운 모서리를 갖는 디스크의 경우가 더 낮은 손실계수를 나타냄을 알 수 있었다.

• 한국산학기술학회논문지
• /
• 제11권12호
• /
• pp.4685-4690
• /
• 2010

E-EGR Valve 고장의 원인이 되는 내부 퇴적물 축적을 최소화하기 위한 새로운 Valve 형상을 제안하고자 한다. 전산유체 해석을 통하여 다양한 형상에 대하여 유속과 유량을 관찰하였으며, 밸브 상부에 라운드를 추가한 Valve 디자인 변형을 통하여 유량손실 없이 Valve 내의 유속을 약 10% 향상시킬 수 있었다.

• 공학교육연구
• /
• 제19권6호
• /
• pp.44-48
• /
• 2016

This research is one of the Industry-University cooperation in idea factory of Korea Maritime and Ocean University. Idea factory of Korea Maritime and Ocean University is trying to train creative talented students and discover ingenious ideas. The contents are consisted of the possibility for the replacement of a metal valve disk to composite valve disk in butterfly valve based on the diversification. Purpose in this study is to predict failure field by each fly by appling Tsai-Wu Failure Index.