• Journal of Distribution Science
• /
• v.10 no.6
• /
• pp.39-53
• /
• 2012

It is widely known that knowledge management plays a facilitating role that contributes to upgrading organizational performance. Knowledge management systems (KMS), especially, support the knowledge management process including the sharing, creating, and using of knowledge within a company, and maximize the value of knowledge resources within an organization. Despite this widely held belief, there are few studies that describe how companies actually develop, share, and practice their knowledge. Companies in the domestic small franchise sector, which are in the early stages in terms of knowledge management, need to improve their KMS to manage their franchisees effectively. From this perspective, this study uses a qualitative approach to explore the actual process of knowledge management implementation. This article presents a case study of PB (Paris Baguette) company, which is the first to build a KMS in the franchise industry. The study was able to confirm the following facts through the analysis of target companies. First, the chief executive's support is a critical success factor and this support can increase the participation of organization members. Second, it is important to build a process and culture that actively creates and leverages information in knowledge management activities. The organizational learning culture should be one where the creation, learning, and sharing of new knowledge is developed continuously. Third, a horizontal network organization is needed in order to make relationships within the organization more close-knit. Fourth, in order to connect the diverse processes such as knowledge acquisition, storage, and utilization of knowledge management activities, information technology (IT) capabilities are essential. Indeed, IT can be a powerful tool for improving the quality of work and maximizing the spread and use of knowledge. However, during the construction of an intranet based KMS, research is required to ensure that the most efficient system is implemented. Finally, proper evaluation and compensation are important success factors. In order to develop knowledge workers, an appropriate program of promotion and compensation should be established. Also, building members' confidence in the benefits of knowledge management should be an ongoing activity. The company developed its original KMS to achieve a flexible and proactive organization, and a new KMS to improve organizational and personal capabilities. The PB case shows that there are differences between participants perceptions and actual performance in managing knowledge; that knowledge management is not a matter of formality but a paradigm that assures the sharing of knowledge; and that IT boosts communication skills, thus creating a mutual relationship to enhance the flow of knowledge and information between people. Knowledge management for building organizational capabilities can be successful when considering its focus and ways to increase its acceptance. This study suggests guidelines for major factors that corporate executives of domestic franchises should consider to improve knowledge management and the higher operating activities that can be used.

• Journal of Science and Technology Studies
• /
• v.16 no.2
• /
• pp.99-147
• /
• 2016

This paper critically reviews the previous discussion over public engagement with science and technology by Science and Technology Studies literatures with a focus on justification and acceptance. Recent studies pointed out that the "participatory turn" after the late 1990s was followed by confusion and disagreement over the meaning and agency of public engagement. Their discussion over the reproduction of the ever-present boundary between science and society along with so-called late modernity and post-normal science and sometimes through the very processes of public engagement draws fresh attention to the old problem: how can lay participation in decision-making be justified, even if we agree that privileging the position of experts in governance of science and technology is no longer justified? So far STS have focused on two conditions for participatory turn-1) uncertainties inherent in experts' ways of knowing and 2) practicability of lay knowledge. This paper first explicated why such discussion has not been logically sufficient nor successful in promoting a wide and well-thought-out acceptance of public engagement. Then the paper made a preliminary attempt to explain what new types of expertise can support the construction and sustainment of participatory governance in science and technology by focusing on one case of lay participation. The particular case discussed by the paper revolves around the actions of a civil organization and an activist who led legal and regulatory changes in wind power development in Jeju Special Self-governing Province. The paper analyzed the types of expertise constructed to be effective and legitimate during the constitution of participatory energy governance and the local society's support for it. The arguments of this paper can be summarized as follows. First, an appropriate basis of the normative claim that science and technology governance should make participatory turn cannot be drawn from the essential characteristics of lay publics-as little as of experts. Second, the type of 'expertise' which can justify participatory governance can only be constructed a posteriori as a result of the practices to re-construct the boundaries between factual statements and value judgment. Third, an intermediary expertise, which this paper defines as a type of expertise in forming human-nonhuman associations and their new pathways for circulations, made significant contribution in laying out the legal and regulatory foundation for revenue sharing in Jeju wind power development. Fourth, experts' conventional ways of knowing need to be supplemented, not supplanted, by lay expertise. Ultimately, the paper calls for the necessity to extend STS discussion over governance toward following the actors. What needs more thorough analysis is such actors' narratives and practices to re-construct the boundaries between the past and present, facts and values, science and society. STS needs a renewed focus on the actual sites of conflicts and decision-making in discussing participatory governance.

• Journal of dental hygiene science
• /
• v.12 no.6
• /
• pp.682-688
• /
• 2012

This study investigates the stressors of dental hygienists and student hygienists during the bedside training by the medical center type. The survey is based on some dental hygienists who are working for dental college hospitals, general hospitals, dental hospitals and dental clinics in Seoul and Gyeonggi area which the Clinical Practice of dental hygienics students is under way in. Included are the students who are studying dental hygienics at Kyungbok University and have taken the bedside training in dental college hospitals, general hospitals, dental hospitals and dental clinics. A statistical analysis shows the following results using SPSS program. By medical center type, dental hygienists described the clinical practice of students as relatively satisfying. It also found that there is a positive correlation between stress zones, and they feel most stressed in the "Role and Activity" zone. Student hygienists felt relatively satisfied with the bedside training, and there is a positive correlation between stress zones except "Practice". It found students, who have taken the bedside training in all types of medical centers except dental clinics, felt most stressed in "Environment". It also found that students who have taken the bedside training in dental clinics felt most stressed in "Role and Activity". In conclusion, most of the dental hygienists are satisfied with students' clinical practice by pattern of hospital. Positive correlation was shown between stress factors. Behavior and attitude and ideal and value are high in stress in college dental hospitals, role and activity and treatment fields are high in stress in dental hospital, and interpersonal relationships are high in stress in dental clinics.

• Journal of The Korean Ophthalmological Society
• /
• v.59 no.12
• /
• pp.1129-1136
• /
• 2018

Purpose: To compare the postoperative clinical outcomes after cataract surgery and implantation using the BunnyLens $MF^{(R)}$ and $ReSTOR^{(R)}$ multifocal intraocular lenses. Methods: Sixty-five eyes implanted with multifocal intraocular lenses were divided into two groups involving either $ReSTOR^{(R)}$ (39 eyes) or BunnyLens $MF^{(R)}$ (26 eyes) lenses. In these two groups, the distant and near visual acuity, astigmatism, spherical equivalent, and contrast sensitivity test were examined at preoperative and postoperative 1 week, 8 weeks, and 24 weeks. We compared the clinical efficacy between the two groups before and after cataract surgery using statistical analysis. Results: The mean value of distant and near visual acuity, and spherical equivalent of both groups after intraocular lens implantation were significantly improved, compared with the preoperative values (p < 0.05), while there was no significant differences between the two groups (p > 0.05). The means of postoperative distant and near visual acuity, astigmatism, and contrast sensitivity test were not significantly different between $ReSTOR^{(R)}$ and BunnyLens $MF^{(R)}$ lenses (p > 0.05). The mean numeric error of spherical equivalent at the final postoperative 24 weeks was $-0.17{\pm}0.50$ diopters (D) for the $ReSTOR^{(R)}$ lenses and $-0.34{\pm}0.52D$ for the BunnyLens $MF^{(R)}$ lenses (p > 0.05). Conclusions: BunnyLens $MF^{(R)}$ and $ReSTOR^{(R)}$ lenses showed no significant difference in clinical efficacy, including distance and near vision, spherical equivalent error, and contrast sensitivity test after cataract surgery. However, it should be noted that BunnyLens $MF^{(R)}$ lenses had a tendency toward myopic shift compared with $ReSTOR^{(R)}$ lenses.

• Korean Journal of Dental Materials
• /
• v.44 no.1
• /
• pp.61-68
• /
• 2017

This study evaluated the effects of various cleaning methods on the shear bond strength of zirconia ceramics after saliva contamination. Eighty zirconia disk specimens were divided into 8 groups. All groups were treated with one coat of MDP primer. All specimens (except the negative control) were contaminated with human saliva on the zirconia surface. The positive control went through the bonding procedure immediately after contamination without any cleaning procedure. With the exception of control groups, the remaining six groups were rinsed with water and either applied with MDP recoating (WATER+MDP) or without MDP recoating (WATER). While some were cleaned with a Ivoclean with MDP recoating (IVOCLEAN+MDP) or not applied with MDP recoating(IVOCLEAN), others were cleaned with a 1% NaOCl solution with MDP recoating (NaOCl+MDP) or without MDP recoating (NaOCl). The shear bond strength of all specimens were measured after being stored in distilled water at $37^{\circ}C$ for 24 hours. The data was analyzed statistically by an analysis of ANOVA, Tukey's post hoc test and Student's t-test was used to compare the shear bond strength according to the re-coating of MDP after the cleaning procedure. The positive control group showed the lowest shear bond strength value, and the WATER group and NaOCl group showed no significant difference when compared to the positive control group. The IVOCLEAN group showed significantly higher shear bond strength when compared to Water group and NaOCl group but not with the group of negative control. After rinsing with water or the NaOCl solution, the comparison of the single coating of MDP and re-coating of MDP showed different shear bond strengths but there was no significant difference to the negative control. After rinsing with Ivoclean, there was no significant difference to the negative control regardless of the recoating of MDP. In conclusion, the shear bond strength was affected by the cleansing procedure and Ivoclean was found to be effective regardless of the re-coating of MDP. When water or the NaOCl solution is used to remove surface contaminants, the re-coating of MDP provides a positive effect on cementation.

• Journal of agriculture & life science
• /
• v.46 no.6
• /
• pp.97-104
• /
• 2012

The aim of this study was to investigate the quality properties of beef jerky replaced salt (NaCl) with red pepper paste, soy sauce and soybean paste. The quality properties of beef jerky including water activity ($a_w$), pH, moisture content, protein content, color, shear force, texture profile analysis and sensory evaluations were investigated. The sliced beef samples were marinated at salt (control), soybean paste (T1), soy sauce (T2) and red pepper paste (T3) for 24 h and then dried at $70^{\circ}C$ for 8 h. The $a_w$ and moisture content varied from 0.88 to 0.79 and from 28.87% to 22.98%, respectively. All treatment samples showed higher final $a_w$ and moisture content than the control sample after drying for the 8 h (p<0.05). The protein content of T2 and T3 samples were lower than the control. Also, shear force and hardness value of all treatment samples had lower than the control (p<0.05). However, all treatment samples showed lower saltiness intensity than the control sample. Sensory panelists recorded greater flavor and texture scores to the samples with soy sauce replacement. Therefore, sensory panels found that the T2 samples had better overall acceptability scores than the other beef jerky samples (p<0.05).

• Korean Journal of Remote Sensing
• /
• v.26 no.2
• /
• pp.65-73
• /
• 2010

To observe and analyze the characteristics of cloud and precipitation properties, the Cloud physics Observation System (CPOS) has been operated from December 2003 at Daegwallyeong ($37.4^{\circ}N$, $128.4^{\circ}E$, 842 m) in the Taebaek Mountains. The major instruments of CPOS are follows: Forward Scattering Spectrometer Probe (FSSP), Optical Particle Counter (OPC), Visibility Sensor (VS), PARSIVEL disdrometer, Microwave Radiometer (MWR), and Micro Rain Radar (MRR). The former four instruments (FSSP, OPC, visibility sensor, and PARSIVEL) are for the observation and analysis of characteristics of the ground cloud (fog) and precipitation, and the others are for the vertical cloud characteristics (http://weamod.metri.re.kr) in real time. For verification of CPOS products, the comparison between the instrumental products has been conducted: the qualitative size distributions of FSSP and OPC during the hygroscopic seeding experiments, the precipitable water vapors of MWR and radiosonde, and the rainfall rates of the PARSIVEL(or MRR) and rain gauge. Most of comparisons show a good agreement with the correlation coefficient more than 0.7. These reliable CPOS products will be useful for the cloud-related studies such as the cloud-aerosol indirect effect or cloud seeding. The visibility value is derived from the droplet size distribution of FSSP. The derived FSSP visibility shows the constant overestimation by 1.7 to 1.9 times compared with the values of two visibility sensors (SVS (Sentry Visibility Sensor) and PWD22 (Present Weather Detect 22)). We believe this bias is come from the limitation of the droplet size range ($2{\sim}47\;{\mu}m$) measured by FSSP. Further studies are needed after introducing new instruments with other ranges.

• Korean Journal of Remote Sensing
• /
• v.17 no.1
• /
• pp.33-44
• /
• 2001

The paper presents several satellite models and satellite image decomposition methods for inaccessible area where ground control points can hardly acquired in conventional ways. First, 10 different satellite sensor models, which were extended from collinearity condition equations, were developed and then behavior of each sensor model was investigated. Secondly, satellite images were decomposed and also pseudo images were generated. The satellite sensor model extended from collinearity equations was represented by the six exterior orientation parameters in $1^{st}$, $2^{nd}$ and $3^{rd}$ order function of satellite image row. Among them, the rotational angle parameters such as $\omega$(omega) and $\Phi$(phi) correlated highly with positional parameters could be assigned to constant values. For inaccessible area, satellite images were decomposed, which means that two consecutive images were combined as one image, The combined image consists of one satellite image with ground control points and the other without ground control points. In addition, a pseudo image which is an imaginary image, was prepared from one satellite image with ground control points and the other without ground control points. In other words, the pseudo image is an arbitrary image bridging two consecutive images. For the experiments, SPOT satellite images exposed to the similar area in different pass were used. Conclusively, it was found that 10 different satellite sensor models and 5 different decomposed methods delivered different levels of accuracy. Among them, the satellite camera model with 1st order function of image row for positional orientation parameters and rotational angle parameter of kappa, and constant rotational angle parameter omega and phi provided the best 60m maximum error at check point with pseudo images arrangement.

• Journal of Legislation Research
• /
• no.41
• /
• pp.401-434
• /
• 2011

The discussion on the adoption of the horizontal regulatory framework is underway to overcome the problems regarding the vertical regulatory framework resulting from a convergence of broadcasting and telecommunications services. Recently, however, the horizontal regulatory framework shows its limitation to regulate the ecosystem established mainly by Google and Apple. The existing horizontal regulatory framework does not fully reflect the characteristics of the two-sided market and the change in the competition structure in the broadcasting and telecommunications sector. What is important to note is that if the existing horizontal regulatory framework is simply applied to the ecosystem, a regulatory imbalance can be caused among ecosystems. The existing horizontal regulatory framework, which is subject to a value chain structure, categorizes business entities into either contents layer or transmission layer and applies the same regulation to all business entities in the same category. However, in the ecosystem, a keystone-player can be categorized into different layers depending on its strategy. Therefore, if the existing horizontal regulatory framework is applied as it is, the regulatory imbalance between keystone-players located in less regulated areas and keystone-players located in more regulated areas occurs resulting in a distortion of competition. There are two possible ways to establish a new regulatory framework to prevent the distortion of competition likely to be caused by the adoption of a horizontal regulatory system. First, a new ecosystem regulatory framework different from the existing one can be established. Second, the horizontal regulatory framework can be modified to reflect the ecosystem elements. The first approach is hard to adopt given the current situation as the approach requires the analysis of all broadcasting and telecommunications ecosystems including mobile and wired services; currently research and study on the competition conditions in the ecosystems is not enough. Therefore, this paper supports the second approach proposing a modified horizontal regulatory framework through the improvement of institutions and remedies suitable for accommodating the ecosystem elements. This paper intends to propose a way to regulate broadcasting and telecommunications ecosystems taking into consideration the ecosystem elements on top of the Telecommunications Business Act, Broadcasting Act, IPTV Act, the competition condition evaluation system of the Basic Act on Broadcasting and Telecommunications Development, and regulation on common carriers under the Telecommunications Business Act.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.35-40
• /
• 2018

Purpose : The range of force differs from the size of proton energy used in our hospital. The compensator enables to change energy size based on distal thickness which also makes changes in dose rate. Therefore, the purpose of this study is to evaluate the effect of changing the thickness of compensator distal on dose range and beam on time. Subject and Methodology : Five low energy patients who have received proton therapy were selected as subjects for this study. Beam on was checked for the selected patients during the existing therapy. After then, the thickness of distal of compensator was increased by 2 cm up to 14 cm through proton therapy plan system(TPS) for comparative analysis. For the evaluation of dose range, the value of the target's conformity index(CI) and the maximum dose of rear side target's organ at risk(OAR) were compared. Furthermore, to evaluate the effect of therapy time, beam on time was compared by making compensator distal in each thickness. Result : The result of homogeneity index and conformity index of the increased compensator distal showed the same level in all patients. The comparison results of OAR of target rear side showed 7 cGy at spine cord of abdomen at maximum, 88 cGy at eyeball's RT lens, 391 cGy at RT lens of nasal cavity 51 cGy at trachea of the mediastinum, and 661 cGy at a small bowl of the pelvis. The comparison results of the beam on time showed a reduction from 126 seconds to 62 seconds for the abdomen, from 105 seconds to 37 seconds for the eyeball, from 187 seconds to 134 seconds for nasal cavity, from 100 seconds to 40 seconds for mediastinum, from 440 seconds to 118 seconds for the pelvis. Conclusion : The research result showed that as the distal thickness of compensator increased, the size of energy increased. In addition, beam on decreased due to the increase of dose rate. It is expected that the result would help reduce the treatment time and increase the convenience of patients if it is applied to liver patients who need respiratorygated therapy and pediatric patients. However, distal penumbra increased as the size energy increased. Therefore, in treating cases where OAR is in the vicinity of the target rear side, the influence of penumbra should be taken into account in adjusting thickness level of the compensator in proton therapy plan.