• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.302-305
• /
• 2005

In this study, settlement characteristics of 38 CFRD was investigated from monitoring data and the method to estimate the dam settlements considering valley shape during constructions was proposed. The construction modulus of dam was found to be dependent on void ratios and valley shape factor. The construction modulus varied with valley shape and decreased with increasing void ratio. Also, the modulus was increased when the shape coefficient was less than 4. The settlement investigation results showed that the total settlement was proportional to the value of the settlement coefficient multiplied by the shape coefficient divided by void ratio.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.2
• /
• pp.161-166
• /
• 2016

Objective: The purpose of this study was to determine the knee and ankle joint kinematics and kinetics by comparing downhill walking with valley-shape combined slope walking. Method: Eighteen healthy men participated in this study. A three-dimensional motion capture system equipped with eight infrared cameras and a synchronized force plate, which was embedded in the sloped walkway, was used. Obtained kinematic and kinetic parameters were compared using paired two-tailed Student's t-tests at a significance level of 0.05. Results: The knee flexion angle after the mid-stance phase, the mean peak knee flexion angle in the early swing phase, and the ankle mean peak dorsiflexion angle were greater during downhill walking compared with valley-shape combined slope walking (p < 0.001). Both the mean peak vertical ground reaction force (GRF) in the early stance phase and late stance phase during downhill walking were smaller than those values during valley-shape combined slope walking. (p = 0.007 and p < 0.001, respectively). The mean peak anterior GRF, appearing right after toe-off during downhill walking, was also smaller than that of valley-shape combined slope walking (p = 0.002). The mean peak knee extension moment and ankle plantar flexion moment in late stance phase during downhill walking were significantly smaller than those of valley-shape combined slope walking (p = 0.002 and p = 0.015, respectively). Conclusion: These results suggest that gait strategy was modified during valley-shape combined slope walking when compared with continuous downhill walking in order to gain the propulsion for lifting the body up the incline for foot clearance.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.03a
• /
• pp.1219-1226
• /
• 2005

In this study, crest settlement characteristics of CFRD (Concrete Faced Rockfill Dam) and ECRD (Earth Cored Rockfill Dam) were analysed through the instrumentation data from representative 7 large dams in Korea. Also, We have studied the effect of valley shape and uniaxial compressive strength of intact rock to better understand the impact of the parent rock strength and the valley shape on the long term crest settlement of CFRDs. From the results, we found that the valley shape and strength of intact rock on crest settlement of dams are an important parameters. As a result, we obtained that the maximum crest settlement of CFRD is larger than that of ECRD and long term crest settlement rate per dam height of rockfill dams is less than 0.60% during service period.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.5
• /
• pp.67-75
• /
• 2002

This study was carried out to introduce current status to discuss erosion control strategy for the conservation of stream valley ecosystem. To restore stream valley ecosystem, we should establish restoration plans to keep the original shape of stream. It is necessary to use environmentally sound materials with conservation of valley stability. Valley construction for erosion control works should be evaluated continuously based on concepts of conservation and development of stream valley ecology. It is categorized in point of the important of class of stream valley conservation ahead planning and constructure. We suggest that the development of stream valley construction needs to prevent mass movement of soil sediments. In addition, it is established the basal strategy to protect macro and micro aquatic organisms in stream valley ecosystem.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2935-2938
• /
• 2003

A new Valley-fill circuit for improving PF(power factor) is proposed in this paper. The proposed topology combines Valley-fill rectifier and an additional inductor for boosting. In the proposed circuit, a shapc of input current is related to the PWM duty cycle. The boosting inductor makes improve PF by the electric charge transfer action. The operation principle and the shape of input current arc analyzed as applied the boosting inductor. The optimum value of boosting inductor is determined. A 100W single-stage converter has been designed and tested. Experimental results are presented to verify the validity of the proposed converter.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.3
• /
• pp.139-144
• /
• 2000

This study was conducted to obtain the basic information to increase the practical use of soil survey data through the subdividing of valley shapes with soil sequences due to different parent rocks, and to study the relationship between the valley shapes and parent rock. The various rocks such as sedimentary(gray shale and sand stone) and igneous rocks(granite, granite gneiss and andesite porphyry) which are the major parent rocks in Yeongnam area were investigated. The characteristics of valleys formed and the kinds of soils derived from different rocks were analysed by using aerial photographs and topographical maps scaled 1:5,000. The rill density in igneous rock area was as high as 40. But the rill bifurcation ratio of first order stream was higher in the sedimentary than the igneous rocks except granite area. The mean slope of valleys in igneous areas was about 8%, which was higher than that of the sedimentary areas. The variability of valley width in the complexly metamorphosed rock, such as granite gneiss, and andesite porphyry, was greater than in sedimentary and in granite rocks. Based on the variability of valley widths and valley slopes, it was possible to classify the valleys into two types. The "Uterus-shaped valleys" had wide variability of valley width and were located in the areas of granite gneiss and andesite porphry rocks. while the "Roots-shaped valleys" had narrow variability of valley width and were located in the sedimentary areas. "Uterus-shaped valleys" were typified by having land forms of mountain foot slopes and alluvial fans, and the soil drainage sequences also had complexities. So that, we concluded that the variability of valley width and valley slopes was associated with kinds of parent rocks and metamorphism which influences soil sequence and characteristics.

• Journal of the Korean housing association
• /
• v.21 no.5
• /
• pp.137-144
• /
• 2010

The purpose of this study is to clarify locational characteristics and the road systems of existing 22 old settlements in Cheongju downtown of Korea. These old settlements are classified largely into two types by geographical feature; Hill type located in ridge and Valley type in the valley from the ridge. The Hill type is further categorized into San-rock located on ridge and Gogae located on hillside, and the Valley type into closed large and small valley, that is, Daegok and Sogok by the shape and size of the valley. The road systems are classified into outer road, approaching road, inner road, and side road. In San-rock type villages, Inner road is changed side roads by new arterial road, and new ones become inner road. The outer road are almost cut off, but side roads maintain. In the case of the Gogae type, main road becomes inner road, maintain old hierarchical road, and in other cases, villages are formed around side roads derived from main road, and outer road and inner road are cut off. Among the Valley type, Daegok type maintains old hierarchical road, while for Sogok type, outer roads are cut off, and new roads are outer road.

• Korean Journal of Plant Resources
• /
• v.22 no.6
• /
• pp.483-488
• /
• 2009

The main objective of this breeding program is to develop high yielding, disease resistance and good processing potato cultivar. 'Gui Valley' is a clonal selection resulting from a cross between 'ND2471-8' and 'Cona'. It has medium plant height and light green foliage. 'Gui Valley' has medium flowering habit and light pink flowers. 'Gui Valley' is a medium maturing potato cultivar and tubers are smooth, yellow skin, light yellow flesh, long-oval tuber shape, distinct red eyes with medium depth and medium dormancy. It has high level of tuber uniformity and good keeping quality. 'Gui Valley' demonstrates resistance to potato virus Y (PVY), soft rot, but moderately susceptible to late blight and common scab. It is also resistant to most of the internal and external physiological disorders particularly dehiscence, hollow heart and internal brown spot. The specific gravity of 'Gui Valley' is significantly higher (1.097) than that of 'Shepody' (1.078). 'Gui Valley' has suitable for processing mainly French fries and chips. This cultivar has high level of tuber uniformity and capable of yielding 37.6 $t{\cdot}ha^{-1}$, which is 18.2% higher than the control potato cultivar 'Shepody' under optimum agronomical practices.

• Cartoon and Animation Studies
• /
• s.43
• /
• pp.321-342
• /
• 2016

The "uncanny valley" curve describes the measured results of the negative emotion response which depends on the similarity between the artificially created character and the real human shape. The "uncanny valley" effect that usually appears in the animation character design induces negative response such as fear and hatred feeling, and anxiety, which is not expected by designers. Especially, in the case of the commercial animation which mostly reply on public response, this kind of negative response is directly related to the failure of artificially created character. Accordingly, designers adjust the desirability of the character design by avoiding or utilizing the "uncanny valley" effect, inducing certain character effect that leads to the success in animation work. This manuscript confirmed the "uncanny valley" coefficient of the positive emotion character design which was based on the actual character design and animation analysis. The "uncanny valley" concept was firstly introduced by a medical scientist Ernst Jentsch in 1906. After then, a psychologist Freud applied this concept to psychological phenomenon in 1919 and a Japanese robert expert Professor Masahiro Mori presented the "uncanny valley" theory on the view of the recognition effect. This paper interpreted the "uncanny valley" effect based on these research theory outcomes in two aspects including sensation production and emotion expression. The mickey-mouse character design analysis confirmed the existence basis of the "uncanny valley" effect, which presented how mickey-mouse human shape image imposed the "uncanny valley" effect on audience. The animation work analysis investigated the reason why the produced 3D animation character should not be 100% similar to the real human by comparing the animation baby character produced by Pix company as the experimental subject to the data of the real baby with the same age. Therefore, the examples of avoiding or utilizing the "uncanny valley" effect in animation character design was discussed in detail and the four stages of sensation production and emotional change of audience due to this kind of effect was figured out. This research result can be used as an important reference in deciding the desirability of the animation character.

• Journal of The Geomorphological Association of Korea
• /
• v.26 no.1
• /
• pp.15-26
• /
• 2019

In this study, we investigated the grain size, lithological type, and shape of coarse bed materials in the upper and middle reaches of Gongneungcheon River. For this purpose, 11 sampling points were selected along the river. For 100 samples of the coarse bed materials at each point, three axes (long, intermediate, and short) of samples were measured, and their lithological types were also identified. By measuring grain size, the sphericity and flatness of samples were calculated. Finally, every particle was classified into four shape categories: sphere, disc, blade and rod. We found that the grain size in incised meandering reach is the largest. This is mainly due to the supply of coarse materials from steep valley sides along the meandering channel. According to the lithological analysis, all samples were identified as granite, gneiss and schist, and quartz. The proportion of granite decreased, whereas the proportion of gneiss and schist increased downstream. These patterns indicate that the bedrock distribution within the study area accounts for the downstream lithological variation of coarse bed materials. With regard to the grain shape, sphericity gradually decreased while flatness gradually increased downstream. In the case of the shape classification, unlike the general downstream pattern of grain shape, the proportion of the sphere type decreased and the proportion of the blade type increased downstream. Such a reversal change in the downstream direction turns out to be determined by the lithology (such as foliation, bedding and the pattern of weathering) of coarse bed materials.