• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.399-404
• /
• 2010

Test results including the variation of propellant-inlet pressure, pulsed thrust, and environment vacuum with the accompanying thermal responses are presented for the pulse-mode operation of a set of monopropellant hydrazine thrusters producing $0.95lb_f$ of nominal steady-state thrust at an inlet pressure of 350 psia. The test data are reduced into the impulse bit, specific impulse, and force centroid that are the factors typically characterizing pulse-mode performance of small rocket engines. With a scrutiny to the performance parameters, their comparison to the reference criteria of 1 lbf standard monopropellant rocket engine are successfully made.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.355-355
• /
• 2010

The epitaxial growth of MgO film on Fe(001) has been investigated by scanning tunneling microscopy (STM). After confirming the clean Fe(001)-c($2{\times}2$) substrate by STM, Mg was deposited at room temperature (RT) under $O_2$ partial pressure of $10^{-7}\;Torr$. The MgO was grown as clusters, not as an epilayer even after postannealing at $400^{\circ}C$, as shown in Figure (a). On the contrary, when Mg was deposited on Fe(001)-c($2{\times}2$) at RT and post-oxidized through exposing $O_2$ at partial pressure $10^{-7}\;Torr$, the thin-layered film with some clusters was formed. Extended-annealing at $400^{\circ}C$ reduced the cluster density, and finally the single and epitaxial MgO-c($2{\times}2$) film was formed on Fe(001)-c($2{\times}2$) as shown in Figure (b). This ultrathin MgO film formed on Fe is expected to be applied to many technological applications, such as catalysis, microelectronics, and magnetic devices.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.399-402
• /
• 2000

Very little information is known on the canning of fishery products by vacuum pack. In this paper, some fundamental process conditions for the canning of fishery products were investigated. Moisture-controlled mackerel pike, shrimp and oyster were packed in lacquered cans with spice and additives. After sealing, pressure of the cans were reduced by do-aeration through specially designed gas-tight silicone rubber plug previously attacked to the lid. On this investigation, vacuum can prior to thermal processing were set up to 15, 30, 45 and 60 cmHg, The higher vacuum in cans showed the more quick heat transfer in thermal processing. tinder 60 cmHg vacuum, the heat transfer was more quick than that of the conventional water packed products, Under 15 cmHg, however, the heat transfer was markedly increased by air which acted as an insulator in conductive heat transfer. These results demonstrated that high vacuum was essential secure for the heat processing in vacuum pack.

• Journal of the Korean Vacuum Society
• /
• v.11 no.4
• /
• pp.235-239
• /
• 2002

A new method for deep trench isolation using selective growth of polycrystalline silicon is proposed. In this method, trench filling is performed by forming polysilicon-inner sidewalls within the trench, and then selectively growing them by reduced chemical vapor deposition using $SiH_2C1_2$gas at $1100^{\circ}C$. The surface profiles of filled trenches are determined mainly by the initial depth of inner sidewalls and the total thickness of selective growth. No chemical mechanical polishing(CMP) process is needed in this new method, which makes the process flow simpler and more reliable in comparison with the conventional method using CMP process.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.935-938
• /
• 2007

In suction nozzle of a vacuum cleaner, where flow-induced noise is generated mainly by flow resistance, several ideas to reduce noise are investigated. To increase fan performance, blade number is optimized and a centrifugal fan is replaced by a cross-flow fan, In addition, gear ratio of fan to drum brush is changed. It is found that fan performance is increased by adopting these methods. Next, the blade height of the fan is decreased to reduce sound pressure level, which causes inevitably decrease in fan performance. Eventually, flow-induced noise is reduced by 6.3 dBA in its overall level with the fan performance maintained.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.249-251
• /
• 2001

A novel technology for recycling valuable metals contained in waste dry-battery by vacuum metallurgy was devised by theoretical analysis. On the condition of the total chamber pressure of 1.013$\upsilon$10$^1$Pa, Hg, Cd and Zn are distilled in the temperature range of 773~973K, Pb is volatilized in the range of 1173~1273K while Mn, Cu, Fe and C are remained in residual. MnO$_2$and ZnO are reduced by carbon in waste dry-battery in 773~1273K. Pure metals including Zn, Cd, Hg and Pb can be recovered respectively from their mixed vapor by fractional condensation. Metal Cu and MnO$_2$can be obtained from the residual by hydrometallguical method. The technology can eliminate the pollution of Cd, Hg and Pb to environment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.353-353
• /
• 2010

Alcohol is a vesatile polar solvent for molecules. As a preparation to deposit large molecules, we studied interaction of solvent molecules on metallic surface. in this work, we report on methanol adsorption on NiAl(110) with scanning tunneling microscopy (STM). These alcohol solvent molecules were deposited by a pulse injection method suitable for deposition of thermally unstable molecules. The injection of liquid alcohol onto the substrate in UHV was performed by using a high-speed solenoid valve with the back-pressure reduced down to 100 Torr. This technique allowed precise control over the amount of dosing of molecules to less than 1 L. Alcohol-induced features, attributed to methoxy, were found on bare NiAl(110) surface.

• Progress in Superconductivity and Cryogenics
• /
• v.20 no.4
• /
• pp.11-15
• /
• 2018

Torque tubes in High Temperature Superconducting (HTS) motor transfer torque from superconducting field winding rotor to the room temperature shaft. It should have minimum heat conduction property for minimizing the load on cryo-refrigerator. Generally, these torque tubes are made with stainless steel material because of high strength, very low outgassing and low thermal contraction properties at cryogenic temperatures and vacuum conditions. With recent developments in composite materials, these torque tubes could be made of composites such as Kevlar and S-Glass, which have the required properties like high strength and low thermal conductivity at cryogenic temperatures, but with a reduced weight. Development and testing of torque tubes made of these composites for HTS motor are taken up at Bharat Heavy Electricals Limited (BHEL), Hyderabad in collaboration with Central Institute of Plastics and Engineering Technology (CIPET), Chennai and Indian Institute of Technology (IIT), Kharagpur. As these materials are subjected to vacuum, it is important to measure their outgassing rates under vacuum conditions before manufacturing prototype torque tubes. The present study focusses on the outgassing characteristics of Kevlar and S-Glass, using an Outgassing Measurement System (OMS), developed at IIT Kharagpur. The OMS facility works under vacuum environment, in which the test samples are exposed to vacuum conditions over a sufficient period of time. The outgassing measurements for the composite samples were obtained using pressure-rise technique. These studies are useful to quantify the outgassing rate of composite materials under vacuum conditions and to suggest them for manufacturing composite torque tubes used in HTS motors.

• Journal of Plant Biotechnology
• /
• v.7 no.2
• /
• pp.113-121
• /
• 2005

The objective of this study was to identify the major parameters controlling DNA delivery by particle bombardment to immature embryos of Chinese spring wheat (Triticum aestivum L.). Efficiency of DNA (uidA gene) delivery was assessed by transient GUS (${\beta}$-glucuronidase) expression in bombarded tissues. Of the parameters analyzed, acceleration pressure, bombardment distance, chamber vacuum pressure, bombardment times, osmotic conditioning of culture had a remarkable influence on transient gene expression. A bombardment procedure suitable for Chinese spring wheat cultivars was developed which allowed high-efficiency DNA delivery combined with reduced damage to target tissues. The high efficiency made the system practical for wheat genetic transformation research and accelerating wheat breeding programs.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.229-234
• /
• 2007

Microscale heat transfer and microfluidics have become increasingly important to overcome some very complex engineering challenges. The use of very small passages to gain heat transfer enhancement is a well documented method for achieving high heat flux dissipation. As the passage size is decreased, the heat transfer performance increases but the pressure drop increases sharply when the passage size is reduced. In this study, the performance evaluation of micro plated heat exchangers under the counter flows with straight, V-shaped and Y-shaped channel are carried out.