• 한국농림기상학회지
• /
• 제11권1호
• /
• pp.27-38
• /
• 2009

연직으로 여러 높이에서 측정된 기체의 농도는 다양한 목적에 활용될 수 있다. 예를 들어, 복잡지형에 위치한 우리나라의 일반적인 산림유역에서 에디공분산방법에 의한 증발산 및 이산화탄소 순생태 교환량(Net Ecosystem Exchange, NEE)을 관측하기 위해서는 수평 및 연직 이류(advection)와 저류(storage)항의 효과를 정량화해야 한다. 그리고 미량 기체의 발원 및 흡원을 추적하거나 관측의 발자국 분석을 위해서도 필요하다. 수증기와 이산화탄소의 연직 농도 분포는 일반적으로 에디공분산 플럭스 타워에 보조 장치로 설치되는 다중 기체 프로파일 관측시스템(이하 프로파일 시스템)에 의해 측정된다. 이 시스템은 다른 미기상 관측기기와는 달리 서로 독립된 여러 기기와 장치들이 하나의 목적을 위해 결합되어 작동되기 때문에 사용방법과 기기의 운영/유지/보수에 많은 어려움이 따른다. 현재 전세계적으로 플럭스 타워 관측과 함께 이용되고 있는 프로파일 시스템은 대부분 미국의 캠벨사(Campbell Sci. Inc.)에서 제작/판매하는 시스템과 개별 연구자들이 각자의 목적과 관측환경에 적합하도록 자체 제작한 시스템으로 구분된다. 연세대학교 대기과학과 생물기상/생지화학 연구팀은 2005년부터 광릉 산림유역의 활엽수림과 침엽수림에 미국 캠벨사에서 제작한 두 개의 프로파일 시스템을 설치/운영하며 다양한 기술적, 이론적 경험과 지식을 축적해 왔다. 이 총설에서는 복잡지형 산림에서의 물과 탄소의 순생태 교환량 관측에 중요한 도구로 사용되는 프로파일 시스템의 원리, 구성, 활용 방법에 대해서 소개한다.

• 대한의용생체공학회:의공학회지
• /
• 제28권2호
• /
• pp.306-309
• /
• 2007

PXLM(Phosphor based x-ray light modulator) has a combined structure by phosphor, photoconductor, and liquid crystal and it can realize x-ray image of high resolution in clinical diagnosis area. In this study, we fabricated a photoconductor and investigated electrical and optical properties to confirm application possibility of radiator detector of PXLM structure. As photoconductor, amorphous selenium(a-Se), which is used most in DR(Digital radiography) of direct conversion method, was used and for formation of thin film, it was formed as $20{\mu}m-thick$ by using thermal vacuum evaporation system. For a produced a-Se film, through XRD(X-ray diffraction) and SEM(Scanning electron microscope), we investigated that amorphous structure was uniformly established and through optical measurement, for visible light of 40 $0\sim630nm$, it had absorption efficiency of 95 % and more. After fabricated a-Se film on the top of ITP substrate, hybrid structure was manufactured through forming $Gd_2O_3:Eu$ phosphor of $270{\mu}m-thick$ on the bottom of the substrate. As the result to confirm electrical property of the manufactured hybrid structure, in the case of appling $10V/{\mu}m$, leakage current of $2.5nA/cm^2$ and x-ray sensitivity of $7.31nC/cm^2/mR$ were investigated. Finally, we manufactured PXLM structure combined with hybrid structure and liquid crystal cell of TN(Twisted nematic) mode and then, investigated T-V(Transmission vs. voltage) curve of external light source for induced x-ray energy. PXLM structure showed a similar optical response with T-V curve that common TN mode liquid crystal cell showed according to electric field increase and in appling $50\sim100V$, it showed linear transmission efficiency of $12\sim18%$. This result suggested an application possibility of PXLM structure as radiation detector.

• Composites Research
• /
• 제27권4호
• /
• pp.146-151
• /
• 2014

본 연구에서는 분극 전계에 따른 압전 페인트 센서의 특성을 확인하기 위해 충격힘과 분극 전계를 변화시켜 가면서 실험적인 연구를 수행하였다. 페인트 센서 제작을 위해 유연 압전 재료인 $Pb(Ni_{1/3}Nb_{2/3})O_3-Pb(Zr, Ti)O_2$ (PNN-PZT) 파우더와 경화제를 포함하고 있는 에폭시 수지를 중량비 1:1로 혼합 후 몰드를 사용하여 $40{\times}10{\times}1mm^3$ 크기를 같는 시편을 제작 하였다. 이후 시편의 기공을 제거하기 위해 진공 데시케이터를 사용하였다. 분극 작업을 위해 시편의 전극은 실버페이스트를 윗면과 아랫면에 바르고 하루 동안 건조시켜 제작하였다. 분극 작업은 온도는 상온으로, 분극 시간은 30분으로 고정하고 분극 전계를 달리하여 진행되었다. 1 mm의 두께를 갖는 앞전 페인트센서를 제작하여 실험에 사용하였으며, 감도 측정 및 감도 변화는 충격 망치를 사용하여 시편에 충격을 가했을 때 압전 페인트에서 출력되는 전압과 충격 망치에서 출력되는 전압을 측정 후 신호처리 하여 비교하였다. 그 결과 압전 페인트의 민감도에 분극 전계가 미치는 영향에 대해 평가 하였고 그 결과를 기술하였다.

• 한국방사선학회논문지
• /
• 제4권4호
• /
• pp.37-40
• /
• 2010

본 연구에서는 X선 조사에 의해 생성된 전하의 이동현상을 조사하기 위해 비행시간 측정방법을 이용하였다. 이 측정기술은 일반적으로 디지털 X선 영상 변환물질의 전하 트랩 및 수송현상에 유용한 방법이다. 비행시간 측정법을 이용하여 a-Se 광도전체의 전하 수송자의 과도시간 및 이동속도를 측정하였다. 시편제작을 위해 열증착법을 이용하여 유리기판위에 $400{\mu}m$ 두께의 a-Se 필름을 제작하였다. 측정결과, 전자와 정공의 과도시간은 $10V/{\mu}m$의 전기장에서 각각 $229.17{\mu}s$ 와 $8.73{\mu}s$ 였으며, 이동속도는 각각 $0.00174cm^2/V{\cdot}s$, $0.04584cm^2/V{\cdot}s$ 였다. 측정결과, 전자와 정공의 이동 속도의 측정값에 다소 큰 차이를 보였으며, 이 결과로부터 전하수송 및 트랩 기전을 분석하는데 이용하였다.

• 한국항공우주학회지
• /
• 제41권9호
• /
• pp.700-707
• /
• 2013

0.4 MW 급 분절형 아크 히터를 장착한 전북대학교 플라즈마 풍동의 초음속 유동 특성 실험을 수행하고 그 결과를 분석하였다. 실험에 사용된 분절형 아크 히터와 초음속 노즐은 16.3 g/s 의 질량유량에 대해 전극 당 150 A, 전체 300 A의 입력전류 조건으로 운전되었으며, 운전 결과 350 kW의 입력전력과 약 51.4 %의 열효율이 계측되었다. 이 때, 아크 히터 내 고엔탈피 플라즈마의 내부압력은 약 4 bar 로 측정되었으며, 이를 초음속 노즐을 통해 압력 45 mbar로 유지되는 진공쳄버 내로 팽창시킴으로써, 전체 엔탈피 11 MJ/kg을 가진 초음속 플라즈마 유동을 얻을 수 있었다. 전체 엔탈피 측정과 함께, 생성된 초음속 플라즈마 유동에 대해 원뿔각 $30^{\circ}$를 가진 원뿔 탐침을 삽입하여 경사 충격파와 이루는 각을 측정하였으며, 이 측정값들로부터, 발생된 초음속 플라즈마의 온도와 마하 수는 각각 약 2,950 K 및 약 3.7에 이를 것으로 예상되었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제20권7호
• /
• pp.1049-1056
• /
• 2007

This study was conducted to compare the methane ($CH_4$) production estimated by in vivo (sulfur hexafluoride tracer technique ($SF_6$)) with that of two in vitro rumen simulation (RUSITEC) and gas production (IVGPT)) techniques. Four adult dry Holstein cows, aged $7.4{\pm}3.0$ years and weighing $697{\pm}70$ kg, were used for measuring methane production from five diets by the $SF_6$ technique. The experimental diets were alfalfa hay ($D_1$), corn silage + soybean meal (SBM) (910: 90, $D_2$), Italian rye grass hay +SBM (920: 80, $D_3$), rice straw +SBM (910: 90, $D_4$) and Sudan grass hay +SBM (920: 80, $D_5$). Each diet was individually fed to all 4 cows and 5 feeding studies of 17 d each were conducted to measure the methane production. In the RUSITEC, methane production was measured from triplicate vessels for each diet .In vitro gas production was measured for each of the diets in triplicate syringes. The gas produced after 24 and 48 h was recorded and gas samples were collected in vacuum vials and the methane production was calculated after correction for standard temperature and pressure (STP). Compared to the $SF_6$ technique, estimates of methane production using the RUSITEC were lower for all diets. Methane production estimated from 24 h in vitro gas production was higher (p<0.001) on $D_1$ as compared to that measured by $SF_6$, whereas on $D_2$ to $D_5$ it was lower. Compared to $SF_6$, methane production estimated from 48 h in vitro gas production was higher on all diets. However, methane estimated from the mean of the two measurement intervals (24+48 h/2) in IVGPT was very close to that of $SF_6$ (correlation 0.98), except on $D_1$. The results of our study confirmed that IVGPT is reflective of in vivo conditions, so that it could be used to generate a database on methane production potential of various ruminant diets and to examine strategies to modify methane emissions by ruminants.

• Environmental Analysis Health and Toxicology
• /
• 제30권
• /
• pp.8.1-8.8
• /
• 2015

Objectives Bedding in childcare centers (CCCs) can hold house dust mite (HDM) allergens. This study examined whether HDM allergen levels can be reduced through the distribution of an educational newsletter on bedding control to parents of CCC children in Korea. Methods All 38 CCCs were measured for Der 1 (sum of Der f 1 and Der p 1) concentrations on classroom floors and bedding before the intervention. Educational newsletters on children's bedding control were sent to 21 CCCs by mail, and teachers were asked to distribute the newsletters to the parents of the children (intervention group). The remaining 17 CCCs were not sent newsletters (control group). The measurement of Der 1 concentrations in 38 CCCs was repeated after the intervention. Dust samples were collected with a vacuum cleaner and analyzed using enzyme-linked immunosorbent assay methods. Results The Der 1 concentrations on the bedding were significantly higher than those on the floors in 38 CCCs at baseline (p < 0.05). Although changes of the Der 1 concentrations for the control group (n=17) were not significant, Der 1 concentrations for the intervention group (n=21) decreased significantly from 2077.9 ng/g dust to 963.5 ng/g dust on the floors and from 3683.9 ng/g dust to 610.4 ng/g dust on bedding (p < 0.05). Conclusions The distribution of educational newsletters on bedding control to parents may be an effective means of controlling HDMs in CCCs.

• Journal of Korean Neurosurgical Society
• /
• 제29권1호
• /
• pp.78-86
• /
• 2000

Objective : Lumbar spinal instability occurs when normal biomechanics support in lumbar vertebrae interrupted. Despite the recent enthusiastic studies, the precise radiological assessment has not been fully established, yet. Therefore, we carefully studied our cases to analyze the radiologic findings in lumbar spinal instability. Patients and Methods : We have put together radiological analysis and assessment based on 38 patients who have been diagnosed and treated for lumbar spinal instabilities from June 1994 to December 1998, Patients who have been diagnosed and treated for trauma were excluded from study. Results : The outcomes are as follows : 1) Lumbar lordotic curve was statistically significant in unstable group by 23.7, compared to the control group ($17.0^{\circ}$). 2) According to the resting x-ray, sagittal plane angulation measured on unstable group was $21.1^{\circ}$, control group $18.0^{\circ}$. Therefore unstable group was noticeably higher(p<0.01). 3) According to the resting x-ray sagittal plane displacement, unstable group had 4.3mm, the comparison had 1.2mm. Therefore measurement from the unstable group were significantly higher(p<0.01). 4) According to stress view, sagittal plane translation was 4.1mm for the unstables and 2.7mm for the comparisons. Therefore unstables were noticeably higher(p<0.01). 5) According to stress view, sagittal plane rotation was $15.1^{\circ}$ at L3-4, $22.0^{\circ}$ at L4-5, $27.9^{\circ}$ at L5S1 for the unstable group and $11.3^{\circ}$, $18.1^{\circ}$, $21.0^{\circ}$ each for the comparison. 6) Facet angle for unstable group, left $29.3^{\circ}-61.5^{\circ}$, right $24.4^{\circ}-63.2^{\circ}$ and the mean for each are $43.1^{\circ}$, $47.2^{\circ}$. The difference between left and right facet angle was $3.5^{\circ}-20.7^{\circ}$ and the mean value $15.3^{\circ}$. Facet angle for the comparisons for the left was $29.3^{\circ}-59.5^{\circ}$, right was in between $25.7^{\circ}-64.5^{\circ}$ range and the each mean are $44.9^{\circ}$ and $47.6^{\circ}$. Also, the difference between left and right facet angle was $4.1^{\circ}-9.3^{\circ}$ and the average was $17.1^{\circ}$. The average and the difference between the left and right angle are found not to have statistic necessity for both unstable and stable measurements(p>0.01). 7) 19 patients were found to have vacuum facet phenomenon among unstable group etc. results were collected. Conclusion : According to above results, we attempted to prepare the application to the patient of radiological analysis and assessment for lumbar spinal instability early checkup.

• 한국포장학회지
• /
• 제23권2호
• /
• pp.75-81
• /
• 2017

반찬이나 간식으로 이용되는 소비성이 높은 튀김어묵에 대해서 진공, 60% $N_2/40%$ $CO_2$, 100% $N_2$ 및 100% $CO_2$의 변형기체포장조건을 사용하여 저장성 향상과 유통기한 연장을 얻을 수 있는 가능성을 검토하였다. $5^{\circ}C$, $10^{\circ}C$, $15^{\circ}C$의 온도 조건에서 저장하면서 품질변화를 측정한 결과 주요 품질열화요소로서 호기성 세균 증식임이 인지되었다. 호기성 세균수 성장을 Huang의 수학적 모델을 통하여 표현하고, 포장 및 저장온도조건에 따른 모델 parameter를 구하였고, 이를 사용하여 한계 미생물 수준에 도달하는 기간으로서 포장 및 온도 조건에 따른 저장유통기한을 설정하여 제시하였다. Arrhenius 방정식으로 표현된 미생물 성장의 온도의존성에서는 유도기의 역수에 대해서 활성화 에너지 139.4 kJ/mol, 성장속도에 대한 활성화 에너지는 41.8 kJ/mol로 얻어졌다. 변형기체포장의 효과에서, $10^{\circ}C$에서 100% 이산화탄소 포장이 호기성 세균 증식을 효과적으로 억제하여 함기포장에 비하여 약 2배의 유통기한을 확보하여 저장성을 향상시킬 수 있었다. 고이산화탄소 상태에서 저온의 온도 조건을 활용하여 저장유통기한을 연장할 수 있을 것으로 확인되었다.

• 교육녹색환경연구
• /
• 제6권2호
• /
• pp.66-90
• /
• 2007

The purpose of this study is to measure and analyze primary causes of indoor air pollution, including carbon dioxide, minute dust, and total volatile organic compounds, for each room before the beginning of a class through the time of discharge after the end of the class in general classrooms, computer rooms, and science rooms of three newly-established schools that opened in 2006, examine properties of indoor air environment in each room by educational activities at school, and determine effective management schemes; the results of this study can be summarized as follows: 1) As for implications for each item found in the mean for each place, since minute dust (PM10) was more likely to occur in time slots full of students' activities, such as a traveling class and a recess, than in the middle of a class and could be expected fully, it is necessary to make a scheme for cleaning in order to reduce minute dust within a room, for example, by usually using a vacuum cleaner indoors. 2) While carbon dioxide was expected to vary with the differences in the amount of breath between higher-graders and lower-graders in a general classroom but showed insignificant difference by grades, showing differences in pollution by four times at a maximum according to the opening of a window as expected, it is necessary to implement artificial or natural ventilation and take a positive measure, for example, by presenting a concrete ventilation scheme, in order to improve indoor air pollution at a room practice. 3) Total volatile organic compounds were found to exceed the standard by more than twice in general classrooms, science rooms, and computer rooms of the schools because of building materials, furnitures including desks and chairs, panels and boards for environment beautification, and items which could be detected even from students' clothes; while a field directly-reading tool was used, obtaining high reliability for the results, it is necessary to apply an analytical method based on process test separately for actual correct measurement if a significantly great amount of total volatile organic compounds appear as compared with other schools due to measuring expenses and consecutive measurements. 4) Since formaldehyde (HCHO) was generally found to exceed the standard in general classrooms, science rooms, and computer rooms, it is necessary to establish and operate a ventilator during a class in a computer room which requires airtightness and a science room in which an organic compound should be used for a class.