• 한국작물학회지
• /
• 제28권3호
• /
• pp.323-327
• /
• 1983

본 연구는 세포간극물질을 추출코자 실시하였다. 2. Vacuum flask에 물을 넣은 후 볏잎을 물에 잠기게 하고, 280mb로 기압을 줄여 벼조직의 세포간극내의 공기를 뺀 후 Vacuum을 끊고 증류수로 세포간극을 채운다. 볏잎에 묻은 증류수를 제거하고 본 연구에서 사용한 leaf holder에 끼워 3,000rpm으로 5분간 원심분리하면 세포간극물질만 채취할 수 있다. 3. 세포내물질과 세포간극물질의 성분분석 및 Peroxidase와 Easterase의 isozyme pattern을 비교한 결과 내용성분의 함량이 서로 다르고 효소의 활성과 isozyme pattern이 다르게 나타나 세포간극물질 추출액 속에는 세포내물질이 혼입되어 있지 않음을 증명하였다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.855-858
• /
• 2001

약모밀(Houttuynia cordata)의 뿌리에서 추출한 ethanol, chloroform, ethylacetate, butanol 및 수용성 추출물의 항균활성을 9 종의 Gram 양성균과 13 종의 Gram 음성균에 대하여 disc diffusion 방법으로 조사하였다. Ethanol, ethylacetae, butanol 추출물은 B. megaterium C. xerosis, S. aureus, S. epidermidis 및 E.coli 에 대하여 항균활성을 나타내었고, chloroform과 수용성 추출물은 활성이 나타나지 않거나 미약하였다. 그러나 Ethylacetate와 butanol 추출물은 상대적으로 낮은 농도에서 강한 항균활성을 나타내었다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.426-430
• /
• 2003

Subsurface biobarrier technology has potential applications to contain contaminated groundwater and/or to degrade toxic pollutants in groundwater. Effective biobarrier formation is need to assess of hydrogeologic characteristics and to conduct practical operation strategies and design based on this prior to design biobarrier. Thus, in this study, we examined hydrogeologic characteristics in biobarrier construction site. Hydraulic conductivities which calculated from slug test data have shown difference with each well as 1.20$\times$10$^{-3}$ -6.00$\times$10$^{-5}$ cm/sec. Tracer test is a method in which concentration of tracer solution during withdrawal in each well by vacuum extraction system is measured with time. Tracer solution was continuously injected by constant head tank. Measured tracer concentration versus time data were fitted to analytical solution of convection dispersion equation (CDE). The fitting data of CDE to the measured data at each extraction well yielded were 0.61cm/min(pore velocity), 5.38$\textrm{cm}^2$/min(dispersion coefficient) for discharge rate of 0.47 1/min and 1.75cm/min(pore velocity), 36.34$\textrm{cm}^2$/min(dispersion coefficient) for discharge rate of 0.93 1/min. As a result, we acquired fundamental parameters which need to design biobarrier and operation strategies.

• Bulletin of the Korean Chemical Society
• /
• 제23권4호
• /
• pp.575-579
• /
• 2002

Two-dimensionally cross-linked ultrathin films of poly(maleic acid-alt-methyl vinyl ether) (MA-MVE) and poly(allylamine) (PAA) were produced by using sodium dioctadecyl sulfate (2C18S) as the monolayer template for Langmuir-Blodgett (LB) depositio n. The template molecules were subsequently removed by thermal treatment followed by extraction. The polyion-complexed monolayers of three components, i.e., template 2C18S, co-spread PAA, and subphase MA-MVE, were formed at the air-water interface. Their monolayer properties were studied by the surface pressure-area isotherm. The monolayers were transferred on solid substrates as Y type. The polyion-complexed LB films and the resulting network films were characterized by FT-IR spectroscopy, X-ray photoelectron spectroscopy (XPS), and scanning electron microscopy (SEM). The cross-linking to form a polymer network was achieved by amide or imide formation through heat treatment under a vacuum. SEM observation of the film on a porous fluorocarbon membrane filter (pore diameter 0.1 ㎛) showed covering of the pores by four layers in the polyion complex state. Extraction by chloroform followed by heat treatment produced hole defects in the film.

• Journal of the Korean Wood Science and Technology
• /
• 제36권5호
• /
• pp.49-55
• /
• 2008

This study was carried to investigate the effects of steaming and four different drying methods on the longitudinal liquid permeability of Korean pine (Pinus koraiensis Sieb.et Zucc.) board. Four drying methods were air drying, conventional kiln drying, microwave-vacuum drying and high temperature drying. Darcy equation was used for calculating the specific permeability of the small sapwood specimens taken from the treated boards while capillary rising method was used for the heartwood specimens. The sapwood specimens were extracted with water and benzene-alcohol solution to examine the mechanism of liquid flow in treated wood. No significant correlation was found between specific permeability and the number of resin canals of the sapwood specimens. Extraction decreased the differences of specific permeabilities of the sapwood specimens between the five treatment methods. The effects of extraction on the longitudinal permeability are different between five treatments. The fluid path in heartwood was observed by dynamic observation method.

• 한국전기전자재료학회논문지
• /
• 제21권5호
• /
• pp.402-410
• /
• 2008

Single-walled carbon nanotubes (SWCNTs) were currently produced together with some contaminants such as a metallic catalyst, amorphous carbon, and graphitic nanoparticles, which should be sometimes purified for their applications. This study aimed to develop efficient, scalable purification processes but less harmful to SWCNTs. We designed three-step purification processes: acidic treatment, surface functionalization and soxhlet extraction, and heat treatment. During the soxhlet extraction using tetrahydrofuran, specifically, carbon impurities could be easily expelled through a glass thimble filter without any significant loss of CNTs. Finally, SWCNTs were left as a bulky paper on the filter through membrane filtration. Vertically aligned SWCNTs on one side of bulky paper were well developed in a speparation from the filter paper, which were formed by being sucked through the filter pores during the pressurized filtration. The bucky paper showed a very high peak current density of field emission up to $200\;mA/cm^2$ and uniform field emission images on phosphor, which seems very promising to be applied to vacuum microelectronics such as microwave power amplifiers and x-ray sources.

• 농업생명과학연구
• /
• 제43권6호
• /
• pp.105-109
• /
• 2009

경산 묘목단지는 대단위 과수종묘를 생산하고 있어 경쟁력 강화를 위하여 무독묘 보증 생산이 요구되고 있다. 특히 생산규모가 큰 사과종묘에 대한 빠르고 정확한 바이러스 진단이 시급하다. 본 연구에서는 사과바이러스 진단을 위하여 다량의 시료를 동시 분쇄할 수 있는 bead beater를 이용하였으며 분쇄 bead는 저가의 산업용 glass bead (0.4 mm 직경)를 일회용으로 채택하였다. RNA추출을 위하여서는 guanidine thiocyanate 용액이 Trizol 용액보다 효과적인 것으로 나타났으며 silica membrane tube의 이용으로 RNA추출 간편성을 높일 수 있었다. 사과바이러스는 RT-PCR에 의하여 검증하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.345-346
• /
• 2013

InGaN material is being studied increasingly as a prospective material for solar cells. One of the merits for solar cell applications is that the band gap energy can be engineered from 0.7 eV for InN to 3.4 eV for GaN by varying of indium composition, which covers almost of solar spectrum from UV to IR. It is essential for better cell efficiency to improve not only the crystalline quality of the epitaxial layers but also fabrication of the solar cells. Fabrication includes transparent top electrodes and surface texturing which will improve the carrier extraction. Surface texturing is one of the most employed methods to enhance the extraction efficiency in LED fabrication and can be formed on a p-GaN surface, on an N-face of GaN, and even on an indium tin oxide (ITO) layer. Surface texturing method has also been adopted in InGaN-based solar cells and proved to enhance the efficiency. Since the texturing by direct etching of p-GaN, however, was known to induce the damage and result in degraded electrical properties, texturing has been studied widely on ITO layers. However, it is important to optimize the ITO thickness in Solar Cells applications since the reflectance is fluctuated by ITO thickness variation resulting in reduced light extraction at target wavelength. ITO texturing made by wet etching or dry etching was also revealed to increased series resistance in ITO film. In this work, we report a new way of texturing by deposition of thickness-optimized ITO films on ITO nano dots, which can further reduce the reflectance as well as electrical degradation originated from the ITO etching process.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.240-240
• /
• 2011

The first neutral beam injector (NBI-1) has been developed for the Korea Superconducting Tokamak Advanced Research (KSTAR) tokamak. A first long pulse ion source (LPIS-1) has been installed on the NBI-1 for an auxiliary heating and current drive of KSTAR core plasmas. Performance of ion and neutral beam extractions in the LPIS-1 was investigated initially on the KSTAR NBI-1 system, prior to the neutral beam injection into the main plasmas. The ion source consists of a JAEA magnetic bucket plasma generator with multi-pole cusp fields and a set of KAERI prototype-III tetrode accelerators with circular apertures. The inner volume of plasma generator and accelerator column in the LPIS-1 is approximately 123 liters. Final design requirements for the ion source were a 120 kV/ 65 A deuterium beam and a 300 s pulse length. The extraction of ion beams was initiated by the formation of arc plasmas in the LPIS-1, called as an arc-beam extraction method. A stable ion beam extraction of LPIS-1 has been achieved up to an 100 kV/42 A for a 4 s pulse length and an 80 kV/25 A for a 14 s pulse length. Optimum beam perveance of 1.21 microperv has been found at an accelerating voltage of 80 kV. Neutralization efficiency has been measured by using a water flow calorimetry (WFC) method of calorimeter and an operation of bending magnet. The full-energy species of ion beams have been detected by using the diagnostic method of optical multichannel analyzer (OMA). An arc efficiency of the LPIS was 0.6~1.1 A/kW depending on the operating conditions of arc discharge.

• 한국자원리싸이클링학회:학술대회논문집
• /
• 한국자원리싸이클링학회 2006년도 춘계임시총회 및 제27회 학술발표대회
• /
• pp.90-94
• /
• 2006

액정(LCD)과 반도체 제조공정에서 발생하는 인산, 질산, 초산, Al, Mo 등이 혼재하고 있는 인산계 혼산폐액을 액정제조공정에서 사용할 수 있는 고순도 에칭액으로 재활용하기 위해서 용매추출법, 진공 증발법, 확산투석법 및 이온교환법의 각각의 기술적 특성을 살린 혼합 처리공정을 이용하여 고순도 인산 회수 기술을 확립하고 상용화 시스템을 개발하고자 하였다. 시험 결과 진공증발에 의해 질산과 초산을 100% 제거할 수 있었고, TOP를 사용한 용매추출에서도 추출 4단, 탈거 6단, 상비 1/3으로 완벽하게 제거할 수 있었다. 이온교환의 전단계로 적용한 확산투석에서 Al 97%, Mo 75% 제거할 수 있었고 이온교환공정에서 Al 및 Mo를 각각 1ppm 이하로 정제할 수 있었다.