• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.137-137
• /
• 2010

Copper electroplating is a very popular and important technology for depositing high-quality conductor interconnections, especially in through silicon via (TSV). As this advanced packaging technique developing, a mass of copper and chemical solution are used, so attention to these chemical materials into the utilization and costs can not be ignored. An economical and practical real-time chemical solution monitoring has not been achieved yet. Either Red-green-blue (RGB) or optical emission spectroscopy (OES) color sensor can successfully monitor the color condition of solution during the process. The reaction rate, uniformity and quality can map onto the color changing. Hidden Semi Markov model (HSMM) can establish mapping from the color change to upper indicators, and artificial neural network (ANN) can be integrated to comprehensively determine its targets, whether the solution inside the container can continue to use.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.320-320
• /
• 2010

The dye-sensitized solar cells (DSSCs) have achieved so far the highest validated efficiency over 11%. However, the cells with the best performance utilize volatile solvent as a electrolyte, which can cause some practical limitations for the long-term operation. This is one of the most substantial problems to be resolved for the commercialization of DSSCs. In order to improve the long-term stability, many research groups have reported new electrolyte system, to replace the liquid type electrolyte by non-volatile ones. In this work, we studied long-term stability of the DSSCs with various types of electrolytes such as (PVDF HFP) based polymer, eutectic melts of ionic liquids, and liquid based solvent. The cells with various electrolytes have been exposed to the condition under thermal stress and illumination over 1000 hours. We will report the change of photovoltaic properties with time and investigate the degradation mechanism with the impedance spectroscopic analysis.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.100-100
• /
• 2013

Among recently discovered 2-dimensional materials, molybdenum disulfide has fascinating physical properties. It is atomically thin and is a semiconductor with with a similar level of bandgap with silicon. Especially, its properties get interesting when it becomes thinner. Its bandgap goes through bandgap transition from indirect to direct gap. Also its gap size increases as its thickness decreases. In this talk, I am going to present our recent work on characterization of its electrical and optical properties. We used Raman and PL spectroscopy to observe its property dependence on thickness. We fabricated electrical devices to study optimal condition for MoS2 devices. Also we synthesized large-area MoS2 films for devices applications.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.7
• /
• pp.661-666
• /
• 1995

The surface structure of the adsorption site for the identification of active sites involved in the Ziegler-Natta catalyst was studied by surface science techniques. As an example of a real catalyst, TiCl3 single crystals were prepared in a gradient furnace designed for this study and characterized by Auger Electron Spectroscopy (AES) and Low Energy Electron Diffraction (LEED) under ultrahigh vacuum condition. The chlorine covered Ti (0001) surface was employed as a model catalyst for the study of Ziegler-Natta catalyst. The diffuse LEED (DLEED) technique for the surface structural determination was applied to this disordered chlorine adsorbed on Ti (0001) surface. The diffuse scattering intensities were measured by a TV-computer method using a low light level video camera. From an analysis of two catalyst systems, the informations for the surface structure of the model catalyst surfaces were derived.

• Progress in Superconductivity and Cryogenics
• /
• v.9 no.1
• /
• pp.32-36
• /
• 2007

The 600 kJ calss high-temperature superconducting(HTS) SMES(superconducting magnetic energy storage) system is being developed by Korean Electrotechnology Research Institute(KERI). The system is operated in cryogenic temperature and high vacuum condition. The SMES magnet was cooled by conduction cooling method using a Gifford-McMahon cycle cryocooler. Thus the electric insulation design at cryogenic temperature and high vacuum is a key and an important element. Because it accomplish compact design that is a big advantage of HTS SMES. This paper describes the electric insulation design, fabrication and experimental results for a mini model of conduction cooled HTS SMES.

• Applied Microscopy
• /
• v.51
• /
• pp.16.1-16.7
• /
• 2021

Electron microscopy (EM) is an essential imaging method in biological sciences. Since biological specimens are exposed to radiation and vacuum conditions during EM observations, they die due to chemical bond breakage and desiccation. However, some organisms belonging to the taxa of bacteria, fungi, plants, and animals (including beetles, ticks, and tardigrades) have been reported to survive hostile scanning EM (SEM) conditions since the onset of EM. The surviving organisms were observed (i) without chemical fixation, (ii) after mounting to a precooled cold stage, (iii) using cryo-SEM, or (iv) after coating with a thin polymer layer, respectively. Combined use of these techniques may provide a better condition for preservation and live imaging of multicellular organisms for a long time beyond live-cell EM.

• Journal of Energy Engineering
• /
• v.17 no.1
• /
• pp.15-22
• /
• 2008

This study was carried out to investigate physical and chemical characteristics of the distillates and residue of Athabasca oilsand bitumen obtained from Canada, using a vacuum distillation unit. The distillates and residue produced from the vacuum distillation were characterized through atomic analysis, SARA analysis, and measurement of boiling point distribution, molecular weight, and API gravity. The vacuum distillation equipment consisted of a 6-litter volume vessel, a glass-packed column, a condenser, a reflux device, a flask fer collecting distillates, and a temperature controller. The cutting of distillates was performed with four steps under the condition of full vacuum and maximum temperature of $320^{\circ}C$. The results showed that the sulfur amount and average molecular weight of the distillates were significantly reduced compared to those of oilsand bitumen. As the cutting temperature increased, the hydrogen amount decreased but the sulfur amount and average molecular weight increased in the distillates.

• Korean journal of food and cookery science
• /
• v.23 no.5
• /
• pp.579-588
• /
• 2007

The effects of packaging methods on the quality of beef and pork jerky samples prepared Korean- style were investigated in terms of their pH, water activities ($A_w$), thiobarbituric acid (TBA) values, total bacterial counts, and sensory evaluations during storage at room temperature ($25^{\circ}C$ for 90 days. The jerky was subjected to plastic packaging and vacuum packaging conditions at $25^{\circ}C$ Levels of pH slightly decreased during storage (p<0.05), but there was no significant difference between the packaging methods. (p>0.05) Also, water activity decreased as storage time passed (p<0.05), and vacuum packaging resulted in a higher water activity value than plastic packaging. The hardness value of the jerky in plastic packaging was higher than that in vacuum packaging (p<0.05). In addition, hardness and TBA increased over the storage periods (p<0.05). The total bacterial counts in of the vacuum packaged jerky were lower than those of the plastic packaged jerky. The vacuum packaging treatments had higher scores than the plastic packaging treatments for all sensory traits. Based on our findings, we conclude that vacuum packaging is a more effective storage method than plastic packaging for jerky.

• Korean Journal of Materials Research
• /
• v.11 no.12
• /
• pp.1068-1073
• /
• 2001

An n-type iron$silicide(Fe_{0.98}Co_{0.02}Si_2)$has been produced by mechanical alloying process and consolidated by vacuum hot pressing. Although as-milled powders after 120 hours of milling did not show an alloying progress,${\beta}-FeSi_2$phase transformation was induced by isothermal annealing at$830{\circ}C$for 1 hour, and the fully transformed${\beta}-FeSi_2$phase was obtained after 4 hours of annealing. Near fully dense specimen was obtained after vacuum hot pressing at$ 1100{\circ}C$with a stress of 60MPa. However, as-consolidated iron silicides were consisted of untransformed mixture of ${\Alpha}-Fe_2Si_5$and ${\varepsilon-FeSi$phases. Thus, isothermal annealing has been carried out to induce the transformation to a thermoelectric semiconducting${\beta}-FeSi_2$phase. The condition for${\beta}-FeSi_2$transformation was investigated by utilizing DTA, SEM, and XRD analysis. The phase transformation was shown to be taken place by a vacuum isothermal annealing at$830{\circ}C$and the transformation behaviour was investigated as a function of annealing time. The mechanical properties of${\beta}-FeSi_2$materials before and after isothermal annealing were characterized in this study.

• Environmental Engineering Research
• /
• v.23 no.1
• /
• pp.54-61
• /
• 2018

Biodiesel production parameters and the impact analysis of the potential emissions from both soybean biodiesel and washing water stored in three different environmental conditions were investigated. The effects of the reaction temperature, methanol/oil mole ratio and catalyst concentration on biodiesel yield were considered. And the results showed optimum biodiesel yield of 99% obtained at $54^{\circ}C$, 7 methanol/oil mole ratio and 0.4 wt/wt % catalyst concentration. The potential emissions from both the biodiesel produced and washing water stored (for six weeks) in refrigerator (${\leq}10^{\circ}C$), vacuum (50 kPa) and direct exposure to atmosphere were identified and quantified. Impact analysis of the emissions involved their categorization into: terrestrial acidification, freshwater eutrophication, human toxicity, terrestrial ecotoxicity, climate change and freshwater ecotoxicity. Freshwater ecotoxicity category had the most pronounced negative impact of the potential emissions with $5.237710^{-2}kg\;1,4-DB\;eq$. emissions in Atmosphere, $4.702610^{-2}kg\;1,4-DB\;eq$. emissions in Refrigerator and $3.966110^{-2}kg\;1,4-DB\;eq$. emissions in Vacuum. Climate change had the least effect of the emissions with $6.214106^{-6}kg\;CO_2\;eq$. in Atmosphere, $3.9310^{-6}kg\;CO_2\;eq$. in Refrigerator and $1.6710^{-6}kg\;CO_2\;eq$. in Vacuum. The study showed that the order of preference of the storage environments of biodiesel is vacuum environment, refrigerated condition and exposure to atmosphere.