• Journal of Korean Vacuum Science & Technology
• /
• v.3 no.1
• /
• pp.79-84
• /
• 1999

the photolithographic patterning on an indium-tin oxide (ITO) glass and the electro-phoretic deposition were combined for preparing the screen of the full-color field emission display(FED). the patterns with a pixel of 400$\mu\textrm{m}$ on the ITO-glass were made by etching the ITO with well-prepared etchant consisting of HCL, H2O, and HNO3. Electrophoretic method was carried out in order to deposit each spherical red (R), green(G), and blue (B) phosphor on the patterned ITO-glass. The process parameters such as bias voltage, salt concentration, and deposition time were optimized to achieve clear boundaries. It was found that the etching process of ITO combined with electrophoretic method was cost-effective, provided distinct pattern, and even reduced process steps compared with conventional processes. The application of reverse bias to the dormant electrodes while depositing the phosphors on the stripe pattern was found to be very critical for preventing the cross-contamination of each phosphor in a pixel.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.69-69
• /
• 2010

현대 건축물에서 건물에너지의 손실은 대부분은 창호를 통하여 유출되어지고 있으며 에너지 절감을 위해서는 창호의 단열성을 향상시켜야한다. 저방사(Low Emissivity) 코팅유리는 건축물의 냉난방비용을 절약할 수 있는 대표적인 건축재료로써 외부에서 유입되는 태양광의 가시광선 영역은 높은 투과율을 가지면서 적외선 영역과 겨울철 실내 난방열을 반사하는 특징을 지니는 박막코팅기술이다. 이 코팅유리는 일반적으로 유전체/금속/유전체 다층박막 구조로 되어있으며, 유전체층은 내구성 증진과 금속층의 반사를 낮추어 투과율이 향상된다. 금속층은 적외선영역의 복사에너지를 반사하는 역할을 하며 전도성이 우수한 Ag 또는 Au, Pt 등을 이용하고 있다. Ag의 경우 산화물기판 위에 증착하였을 경우 island 성장을 하고 이들의 합체는 전기적, 광학적 특성에 큰 영향을 미치게 된다. 본 연구에서는 DC-sputtering법으로 제조된 Ag/glass, Ag/Ta/glass 박막을 제조하고 Ta seeding이 Ag의 전기적, 광학적 성질에 미치는 영향을 관찰하였다. 박막의 표면 미세구조는 FE-SEM(Field Emission Scanning Electron Microscope)과 AFM(Atomic Force Microscope)으로, 표면저항은 4 point probe로 분석하였다. 광투과율은 UV-Vis spectroscopy와 FT-IR로 측정하였으며 측정파장범위는 각각 200~1100nm와 1400~2400nm 이다.

• Journal of the Korean institute of surface engineering
• /
• v.44 no.5
• /
• pp.213-219
• /
• 2011

Recently aspheric lenses are widely used for superpricision optical instruments, such as cellular phone camera modules, digital cameras and optical communication modules. The aspherical lenses are processed using mold core under high temperature compressive forming pressure. It is imperative to develop superhard protective films for the life extension of lens forming mold core. Especially ta-C films with higher $sp^3$ fractions receive attentions for the life extension of lens forming mold and, in turn, the cost reduction of lenses due to their suprior high temperature stability, high hardness and smooth surfaces. In this study ta-C films were processed on WC mold as a function of substrate bias voltage using FVA (Filtered Vacuum Arc) method. The processed films were characterized by Raman spectroscopy and nano-indentation to investigate bonding nature and hardness, respectively. The film with maximun 87% of $sp^3$ fraction was obtained at the substrate bias voltage of -60 V, which was closest to ta-C film. ta-C films showed better high temperature stability by sustaining relatively high fraction of $sp^3$ bonding even after 2,000 glass lens forming applications.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.12
• /
• pp.645-651
• /
• 2015

This paper presents an experimental study on the freeze drying process for poly ${\gamma}$ glutamic acid. The physical properties of poly ${\gamma}$ glutamic acid are measured during the freeze-drying process. The moisture contents of poly ${\gamma}$ glutamic acid according to the glass transient temperature are obtained by DSC (Differential Scanning Calorimetry) analysis. The end point of primary drying for the poly ${\gamma}$ glutamic acid with a thickness of 3 mm is obtained by measuring the thickness of the dried layer, the amount of moisture evaporation, the moisture content, and the pressure in the drying vacuum chamber during the freeze-drying process. By considering the variation in the glass transient temperature with respect to the moisture content of the material, a control schedule for the heating plate temperature is suggested during the secondary drying process.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.210-210
• /
• 2000

Vertically well aligned multi-wall carbon nanotubes (CNT) were grown on nickel coated glass substrates by plasma enhanced hot filament chemical vapor deposition at low temperatures below 600$^{\circ}C$. Acetylene and ammonia gas were used as the carbon source and a catalyst. Effects of growth parameters such as pre-treatment of substrate, plasma intensity, filament current, imput gas flow rate, gas composition, substrate temperature and different substrates on the growth characteristics of CNT were systematically investigated. Figure 1 shows SEM image of CNT grown on Ni coated glass substrate. Diameter of nanotube was 30 to 100nm depending on the growth condition. The diameter of CNT decreased and density of CNT increased as NH3 etching time etching time increased. Plasma intensity was found to be the most critical parameter to determine the growth of CNT. CNT was not grown at the plasma intensity lower than 500V. Growth of CNT without filament current was observed. Raman spectroscopy showed the C-C tangential stretching mode at 1592 cm1 as well as D line at 1366 cm-1. From the microanalysis using HRTEM, nickel cap was observed on the top of the grown CNT and very thin carbon amorphous layer of 5nm was found on the nickel cap. Current-voltage characteristics using STM showed about 34nA of current at the applied voltage of 1 volt. Electron emission from the vertically well aligned CNT was obtained using phosphor anode with onset electric field of 1.5C/um.

• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.2
• /
• pp.71-75
• /
• 2002

GaAs polycrystalline thin films with good performance were prepared on conducting glass by hot wall epitaxy (HWE), which were used for solar cell. Electron probe micro-analyzer (EPMA) was applied for the composition, morphology of surface and cross-section of grown films, and X-ray diffraction (XRD) for their phase structure; Raman scattering spectum (RSS) and photoluminescence (PL) were used for evaluating their optical characteristics. The results show that, there is textured structure on the surface of grown GaAs polycrystalline films, which is greatly promised to be suitable for the candidate of solar cell with low cost and high efficiency. It is concluded that the source and substrate at temperature of 900 ~ 930 $\^{C}$ and 500 $\^{C}$ respectively would be beneficial for such films.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.202-202
• /
• 2012

염료감응태양전지(DSSC)의 광변환 효율을 향상시키기 위하여 진공챔버에서 450도 고온에서 O2, Ar, and N2 혼합가스를 주입하여 다양한 plasma로 TiO2 박막을 처리하면서 소성시켰다. TiO2 표면을 cleaning하고 활성화함으로서 염료의 결합력을 향상시키는 것 외에 TiO2 내부의 oxygen vacancy를 변화를 관찰하였다. 실험에 사용한 박막은 glass 위에 FTO 박막을 입히고, 다공성 TiO2 나노입자 박막을 코팅하여 제조하였다(porous TiO2 나노입자(${\sim}12{\mu}m$)/FTO(Fluorine doped Tin oxide; $1{\mu}m$)/glass). 완성된 광전극에 대해서 XRD, XPS, EIS, FE-SEM 등을 이용하여 분석하였다. 또한 이렇게 전처리된 광전극을 사용한 DSSC를 제작하였다. 그리고 Solar-simulator를 통해 그 효율을 측정하여 '플라즈마환경에서 소성된 광전극에 대한 DSSC의 광변환효율에 미치는 효과'을 고찰하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.178.1-178.1
• /
• 2015

In and Ga doped ZnO (IGZO) thin films were prepared by radio frequency magnetron sputtering without intentional substrate heating on glass substrate and TiO2-deposited glass substrates to consider the effect of a thin TiO2 buffer layer on the optical and electrical properties of the films. The thicknesses of the TiO2 buffer layer and IGZO films were kept constant at 5 and 100 nm, respectively. Since the IGZO/TiO2 bi-layered films show the higher FOM value than that of the IGZO single layer films, it is supposed that the IGZO/TiO2 bi-layered films will likely perform better in TCO applications than IGZO single layer films.

• Journal of the Korean Vacuum Society
• /
• v.8 no.2
• /
• pp.136-140
• /
• 1999

The stability and response time of $WO_3$ thin films for EC device are critical problems being solved. Those are affected by the species of electrolyte, preparation conditions and fabricating methods of specimen. In this paper, we compared the stabilities of three kinds of tungsten oxide film in electrolyte. Each of three films was prepared by different manufacturing conditions, that is, one is a thermal oxidation film of tungsten metal deposited on pure glass substrate, another is a $WO_3$ film made on ITO glass directly, the other is a thermally oxidized film on tungsten plate. It was observed that thermally oxidized $WO_3$ films has a remarkable stability (the lifetime was above $10^6$ cycle). From these results, we found that the stability was closely related to the stoichiometric bonding between tungsten and oxygen atoms in addition to crystallinity and density of film.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1991.10a
• /
• pp.12-16
• /
• 1991

Cadmium sulphide films with thickness of 0.6∼1.2$\mu\textrm{m}$ were deposited onto corning 7059 glass substrate under a vacuum of 5${\times}$10$\^$-6/ Torr. Source and substrate temperature ranges used were 800∼1100$^{\circ}C$ and 100∼200$^{\circ}C$, respectively. The microstructures and semiconducting properties of the films were studied using X-ray diffraction, UV-VIS-IR spectrophotometer and Hall measurement unit. Electrical resistivity and optical transmission of the CdS films decrease with an increase in source temperature while they increase with an increase in substrate temperature. The resistivity of the film evaporated at 1100$^{\circ}C$ varied from 7${\times}$10$^3$ohm-cm at the substrate temperature of 100$^{\circ}C$ to 2${\times}$10$\_$6/ohm-cm at 190$^{\circ}C$. All the films had hexagonal structure and strong texture with c-axis of grains normal to the substrate glass.