• Ecology and Resilient Infrastructure
• /
• v.8 no.4
• /
• pp.194-203
• /
• 2021

With the recent increase in maintenance works on water and sewer pipes as well as district heating supply pipes, pavement cutting work using pavement cutter is on the rise. The pavement cutting operation generates considerable dust (cutting sludge) as well as noise; therefore, it is necessary to apply eco-friendly technologies that have low noise and dust recovery capability. Thus far, various equipment for recovering dust have been developed; however, there is a limitation in that the environmental friendliness is not quantified. Therefore, in this study, we developed a low-noise, dust-recovery type pavement cutter that can fundamentally remove the causes of environmental hazards such as noise and dust and evaluated the eco-friendliness of the pavement cutting process performed by this cutter. To this end, an integrated water cooling-sludge recovery system composed of a vacuum device and a sludge suction unit was developed, and the developed system was applied to a pavement cutter. Subsequently, the developed equipment was applied to the test bed, and data related to its eco-friendliness were collected and evaluated. The results showed that the cutting sludge recovery rate of the developed equipment was greater than 83%, the noise level was approximately 82 - 83 dB, and the sound power level was 115 dB. The results of this study will be used as basic data to develop improved pavement cutters in the future with improved cutting sludge recovery performance and lower noise.

• Journal of the Korean Geosynthetics Society
• /
• v.17 no.4
• /
• pp.169-177
• /
• 2018

Glass fiber reinforced polyester (GFRP) composites are widely used as structural materials in harsh environment such as underground pipes, tanks and boat hulls, which requires long-term water resistance. Especially, these materials might be damaged due to delamination between gelcoat and composites through an osmotic process when they are immersed in water. In this study, GFRP laminates were prepared by surface treatment of UPE (unsaturated polyester) gelcoat by vacuum infusion process to improve the durability of composite materials used in underground pipes. The composite surface coated with gelcoat was examined for surface defects, cracking, and hardness change characteristics in water-immersion environments (different temperatures of $60^{\circ}C$, $75^{\circ}C$, and $85^{\circ}C$). The penetration depth of cracks was investigated by micro CT imaging according to water immersion temperature. It was confirmed that cracks developed into the composites material at $75^{\circ}C$ and $85^{\circ}C$ causing loss of durability of the materials. The point at which the initial crack initiated was defined as the failure time and the life expectancy at $23^{\circ}C$ was measured using the Arrhenius equation. The results from this study is expected to be applied to reliability evaluation of various industrial fields where gelcoat is applied such as civil engineering, construction, and marine industry.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.28 no.4
• /
• pp.382-392
• /
• 2018

Objective: Allergic diseases such as asthma due to fungal exposure in houses have increased, and proper management is urgent. Mold can grow in the air, floor, walls, and other areas according to environmental conditions, and there are many limitations to the conventional methodology for examining fungal exposure. For this reason, the degree of fungal contamination is being evaluated by ERMI (Environmental Relative Moldiness Index), a quantitative analysis method proposed by the EPA. In this study, we compared ERMI values between water-damaged dwellings and non-damaged ones to evaluate the effectiveness of Korean ERMI values. We also explored the association of ERMI values with the level of airborne mold and characteristics of dwellings. Methods: Floor dust was collected after installing a Dustream collector on the suction port of a vacuum cleaner. The collected samples were filtered to remove only 5 mg of dust, and DNA was extracted using the FastDNA SPIN KIT protocol. Results: The ERMI values were found to be 19.6 (-6.9-58.8) for flooded houses, 7.5 (-29.2-48.3) for leaks/condensation, and 0.8 (-29.2-37.9) for non-damaged dwellings. The airborne concentration of mold for flooded, leakage or condensed, and non-damaged houses were $684CFU/m^3$, $566CFU/m^3$, and $378CFU/m^3$, respectively. The correlation between ERMI values and the levels of airborne mold was low (R = 0.038), but a weakly significant association of the ERMI values with the concentration of particulate matter ($PM_{10}$) was observed as well(R=0.231,P<0.05). Conclusions: Our findings show that the reference value using ERMI can be used to distinguish water-damaged and non-damaged dwellings. It is believed that ERMI values could be a promising tool for assessing long-term fungal exposure in dwellings.

• The Korea Journal of Herbology
• /
• v.33 no.2
• /
• pp.9-18
• /
• 2018

Objectives : Hwangryunhaedok-tang (HRHDT) is one of the well-known prescription herbal drugs of Korean herbal medicine, which has been widely used for the treatment of various bacterial and inflammatory diseases. This study was conducted in order to develop the tablet formulations of HRHDT and compare its efficacy with the other commercial formulations. Methods : Corresponding herbal medicines comprising of HRHDT were extracted with water for 3 hr at $95{\sim}100^{\circ}C$ and then vacuum dried. Subsequently, some pharmaceutical excipients such as microcrystalline cellulose, croscarmellose sodium, magnesium stearate, etc were used to prepare the HRHDT tablets. The contents with characterizing components of HRHDT tablet was compared with the HRHDT decoction. The contents of characterizing components were analyzed with HPLC. Furthermore, we investigated the anti-inflammatory and anti-oxidative abilities of two different commercial HRHDT granules (HJP-1 and HJP-2) and were compared with that of the formulated HRHDT tablets. The anti-oxidant properties of HRHDR were studied using the 1,1-diphenyl-2-picryhydrazyl (DPPH) radical, contents of total flavonoid and polyphenol. In addition, based on this result the anti-inflammatory effects have verified by mechanism from LPS- treated Raw264.7 macrophages. Results : The results demonstrated that HRHDT tablets showed more anti-inflammatory and anti-oxidative effects than HJP-1, HJP-2. Moreover, it showed more superior effects in terms of dose, usability and stability than the granules. Conclusion : Hence, we concluded that in order to improve the quality and efficacy of the Korean herbal medicine, it is necessary to develop appropriate methods and establish standardized techniques for the development of good formulations.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.5
• /
• pp.555-566
• /
• 2023

In this study, a composite phase change material (CPCM) produced using the SOL-GEL technique was developed as a thermal energy storage medium for low-temperature applications. Tetradecane and activated carbon (AC) were used as the core and supporting materials, respectively. The tetradecane phase change material (PCM) was impregnated into the porous structure of AC using the vacuum impregnation method, and a thin layer of silica gel was coated on the prepared composite using the SOL-GEL process, where tetraethyl orthosilicate (TEOS) was used as the silica source. The thermal performance of the CPCM was analysed using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). DSC results showed that the pure tetradecane PCM had melting and freezing temperatures of 6.4℃ and 1.3℃ and corresponding enthalpies 226 J/g and 223.8 J/g, respectively. The CPCM exhibited enthalpy of 32.98 J/g and 27.7 J/g during the melting and freezing processes at 7.1℃ and 2.4℃, respectively. TGA test results revealed that the AC is thermally stable up to 500℃, which is much higher than the decomposition temperature of the pure tetradecane, which is around 120℃. Moreover, in the case of AC-PCM and CPCM thermal degradation started at 80℃ and 100℃, respectively. The chemical stability of the CPCM was studied using Fourier-transform infrared (FT-IR) spectroscopy, and the results confirmed that the developed composite is chemically stable. Finally, the surface morphology of the AC and CPCM was analysed using scanning electron microscopy (SEM), which confirmed the presence of a thin layer of silica gel on the AC surface after the SOL-GEL process.

• Journal of Animal Science and Technology
• /
• v.49 no.1
• /
• pp.109-120
• /
• 2007

CLA was chemically synthesized by alkaline isomerization method using corn oil. CLA-TG was synthesized by chemical reaction using sodium methoxide. For the control, 10% of back fat among the total component was only added without the annex of CLA-TG. For the first treatment, 5% of CLA-TG among the lard component added into the press ham was replaced. For the 2nd, 3rd and 4rd treatments, 10%, 15% and 20% of CLA-TG was respectively replaced. Manufacture press ham using CLA-TG were vacuum packaged and then stored during 1, 7, 14, 21 and 28 days at 4℃. Samples were analyzed for shear force value, sensory evaluation, TBARS, fatty acid composition and CLA content. Shear force value of control was significantly higher than that of CLA-TG treatment groups(P<0.05). All treatments were increased by the passage of storage time. No remarkable differences were found in sensory properties among control and CLA-TG treatment groups. CLA-TG treatment groups showed significantly(P<0.05) lower TBARS value than the control. TBARS value was increased significantly during storage in all treatment. In the change of fatty acid composition, the contents of C14:0～C20:4 were decreased significantly by CLA-TG additive. Whereas the increase level of CLA-TG additive resulted in the significantly higher unsaturated fatty acid and CLA content. Summing up the a forementioned results, press ham manufacturing with CLA-TG additive was not affected in sensory evaluation. Also, it may be assumed that the high quality press ham can be manufactured with the extent of storage period and CLA accumulation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.12
• /
• pp.1753-1759
• /
• 2009

The present study was conducted to investigate the effects of components obtained from Zanthoxylum schinifolium and Zanthoxylum piperitum on rancidity and quality of Kwamegi (semi-dried Pacific saury, Coloabis saira). Ethanol extract (ZS) of Zanthoxylum schinifolium leaves or the essential oil (ZP) obtained from pericarp of Zanthoxylum piperitum in 1 or 20% ethanol solution was sprayed to the Pacific saury before Kwamegi preparation at its final concentrations of 0.125~2 ppm in the Kwamegi. The prepared Kwamegi was vacuum packed with multi-layered film (polyethylene/polyamide/EVOH/polyethylene, thickness 80 μm) and kept at -20${^{\circ}C}$ until use. After opening the package Kwamegi was stored at 4${^{\circ}C}$ for 1, 3 and 7 days during which rancidity tests and sensory evaluation were carried out. Acid, peroxide, and thiobarbituric acid (TBA) values increased with storage time but reduced significantly by the addition of ZS at the concentrations of ≥G0.125 ppm and ZP≥F0.25 ppm. The effects of ZS and ZP were dose-dependent and more pronounced as storage time prolonged. The ZS and ZP also reduced dimethyamine and trimethyamine (TMA) contents which were increased with time, while they prevented the decrease of trimethyamine oxide. The ZS at the concentration of ≥G0.25 ppm and the ZP at >0.5 ppm were needed to maintain TMA less than 4.5 mg/100 g for 3 day storage at 4${^{\circ}C}$. Sensory evaluation of the Kwamegi exhibited a slightly higher preference with the ZS and ZP treated ones at the level of 0.25~0.5 ppm. It is concluded that very low amounts of ZS and ZP are effective in suppression of rancidity of Kwamegi and could be utilized for its quality management.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.116-125
• /
• 2018

This study was carried out physicochemical and sensory evaluation to compare the quality characteristics of pork loins from Yorkshire, Duroc, Pietrain, and Duroc ${\times}$ Pietrain (DP). A total of 79 pigs from Yorkshire(22), Duroc(22), Pietrain(17), and DP(18) was used for the experiment. After 24 hours of cooling, pork loins were gathered and vacuum-packed from left carcasses and then the physicochemical traits and sensory evaluation were conducted. The pH of the loins from breed Pietrain was lower than those of the other breeds (p<0.01). While the moisture content of loins was higher in Pietrain than in the other breeds (p<0.01). The fat content of loins was higher in Duroc and DP than in the other breeds and lower in Pietrain than in the other breeds (p<0.01). Pietrain loins had the lowest drip loss (p<0.01) and the highest water holding capacity (p<0.01). There were no significant differences in the cooking loss and shear force of the loins among 4 breeds (p>0.05). There was a significant difference in the CIE color L*, a* and b* values of the loins from 4 breeds (p<0.01). Sensory scores of the loins were ranked lower in Pietrain in overall. The results of this study indicate that meat quality could be altered according to the breeds.

• The korean journal of orthodontics
• /
• v.27 no.6 s.65
• /
• pp.979-995
• /
• 1997

The purpose of this study was to identify the preventive and the progressive inhibitory effects of enamel demineralization with fluoride releasing light-and self-cured orthodontic sealants(FluoroBond), in vitro, under the polarizing light microscope and the scanning electon microscope. The polarizing light microscopic group was subdivided into seven groups(Group A-Group G). The scanning electron microscopic group was also subdivided into seven groups(Group A'-Goup G'). For polarizing light microscopic evaluation, longitudinal sections were made longitudinally by Maruto cutter(Maruto Co., Japan) and Maruto grinding machine(Maruto Co., Japan). Sections were examined and photographed by the polarizing light microscope(Olympus Optical Co., Japan) using crossed polars and with the enamel rod longitudinal axis oriented at $45^{\circ}$ to the extinction position. For scanning electron microscopic evaluation, the specimens were coated with a highly conducting layer of gold palladium in a model Hus-4 high-vacuum evaporator and examined in an ISI-100B scanning electron microcope operated at 20kV. The results of this study were as follows : 1. The mean depths of artificial carious lesions under a polarized light microscope were $Group\;A(5.08{\mu}m),\;Group\;B(47.82{\mu}m,\;Group\;C(8.42{\mu}m),\;Group\;D(7.20{\mu}m),\;Group\;E(85.41{\mu}m),\;Group\;F(60.38{\mu}m),\;Group\;G(60.13{\mu}m)$. 2. There were statistically significant differences in Group B compared with Group A, C, and D(p<0.05), and also, in Group I compared with Group F and Group G(p<0.05). 3. Light-and self-cured orthodontic sealants had the preventive effects of enamel demineralization. 4. Light-and self-cured orthodontic sealants had the progressive inhibitory effects of enamel demineralization. 5. The time progress of demineralizing agent had no influence on the samples of light-and self-cured orthodontic sealants under the scanning electron microscope. 6. There was no difference between the specimens of light-and self-cured orthodontic sealants both in the polarized light microscopic group and in the scanning electron microscopic group.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.18 no.2
• /
• pp.131-138
• /
• 1985

The preservative effect of modified-atmosphere storage on the shelf-life of packed semi-salted and dried mackerel, Scomber japonicus, was examined. The semi-salted and dried mackerel fillets were packed in laminated plastic film bags (polyester/nylon/casted polypropylene: $12{\mu}m/15{\mu}m/60{\mu}m,\;15{\times}16cm$) filled with air (control, C), nitrogen gas (N), deoxygenized air (O) prepared by using free-oxygen absorber enclosed in the bag, in vacuum(V), and stored at $5^{\circ}C$. The quality of packed sample during the storage were examined in terms of viable cell counts of bacteria, thiobarbituric acid(TBA) value, perozide value(POV), volatile basic nitrogen(VBN), trimethylamine(TMA), adenosine triphosphate(ATP) and its related compounds and sensory evaluation. The results obtained are as follows: The pH of all the samples was in the range of $6.1{\pm}0.2$, and the contents of VBN and amino nitrogen of them increased during storage. In color values, L value(lightness) decreased while a and b values (red and yellow) revealed a tendency to increase during storage. The viable cell counts of the control sample(C) increased to $3.0{\times}10^6/g$ after 15 days storage but those of the other samples(V, N and O)were in the range of $2{\sim}6{\times}10^5/g$ after 20 days storage. The content of TMA increased during storage, but the histamine content showed a little change during storage and its content of all samples were less than 16 mg/100g. The inosinic acid(IMP) was rapidly degraded while inosine and hypoxanthine increased during storage. The TBA value of the control(C) reached a peak in 9 days and then decreased gradually while that of the sample(O) showed a little change during storage. The changes in POV of all the samples during storage showed a similar tendency to the TBA value. Fatty acid composition of raw mackerel consists of $35.6\%$ of saturated acid, $30.3\%$ of monoenoic acid and $34.2\%$ of polyenoic acid. The major fatty acid of the sample products were oleic acid($C_{18:1}$), palmitic acid($C_{16:0}$), docosahexaenoic acid($C_{22:6}$). The contents of polyenoic acid such as $C_{22:6},\;C_{20:5}$ decreased during storage while the other fatty acids showed a little change. From the results of sensory evaluation, the shelf-life of the control sample(C) was about 7 days and that of sample(V), (N) and (O) was about 15 days. It was concluded that deoxygenized atmosphere(free-oxygen absorber enclosed in the bag) was a good condition for preserving the quality of semi-salted and dried mackerel.