• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.298-302
• /
• 2004

In this paper, AC electric vehicle propulsion system(Converter/Inverter) using high power semiconductor, UM(Intelligent Power module) is proposed. 2-Parallel operation of two PWM converter is adopted for increasing capacity of system and the VVVF inverter control is used a mixed control algorithm, where the vector control strategy at low speed region and slip-frequency control strategy at high speed region. The proposed propulsion system is verified by experimental results with a 1,350kW converter and 1,100kVA inverter with four 210kW traction motors.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.675-679
• /
• 2007

The control method of programmable dynamometer for overall test of machine is to load reference torque which is computed from torque transducer into motor under test. But the torque information detected from torque transducer have a lot of noise when the load torque of moter is a small quantity or changing. Thus, torque transducer must have a low pass filter to detect a definite torque information. But The torque delay generated by filter with torque transducer occur a torque trouble for moter torque of programmable dynamometer. Therefore, this kind of system could not perform dynamic and nonlinear load. In this paper, the control method using the load torque observer without a measure for torque transducer is proposed. The proposed system improved the problem of the torque measuring delay with torque transducer, and the load torque is estimated by the minimal order state observer based on the torque component of the vector control induction moter. Therefore, the torque controller is not affected by a load torque disturbance.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.3
• /
• pp.274-285
• /
• 1992

Among various Power converters, a variable voltage variable frequency (VVVF) three-phase PWM inverter is regarded as most promising power converter due to its capabilities, which permits the control of voltage, frequency and harmonic contents in a single power stage employing only on DC source. As a modulating technique of the PWM inverter, the regular sampling technique has rendered possible the on-line computation and generation of PWM control waveforms with a reasonably high switching frequencies. In this paper, microprocessor based three-phase regular samping PWM inverter with real-time control algorithm and control circuits for driving three phase AC motor has been developed. Harmocic components of PWM waveform were analized theoretically in terms of Bessel function series and then calculated by digital computer and observed with spectrum analyzer.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.1437-1443
• /
• 2004

In this paper, AC electric vehicle propulsion system(Converter/Inverter) using high power semiconductor, IPM(Intelligent Power module) is proposed. 2-Parallel operation of two PWM converter is adopted for increasing capacity of system and the VVVF inverter control is used a mixed control algorithm, where the vector control strategy at low speed region and slip-frequency control strategy at high speed region. The proposed propulsion system is verified by experimental results with a 1,350kW converter and 1.100kVA inverter with four 210kW traction motors.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.671-675
• /
• 2005

In this paper, Development of propulsion system using IPM(Intelligent Power Module) for DC electric vehicle is proposed. Designed propulsion system is comprised of inverter stack which includes 6 IPM, BCH(Breaking Chopper) unit, FC(Filter Capacitor), Control unit. IPM can compose propulsion system simple by including gate drive circuit and protection circuit. Inverter stack is designed as a simple structure using IPM and non clamp capacitor. VVVF Inverter control is used the vector control strategy at low velocity region and slip frequency-control strategy at high velocity region. Designed propulsion system proves the performance through test and revenue service.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1229-1234
• /
• 2009

The rolling stocks of KORAIL are KTX, Saemaulho Multiple Unit(PP), New Electrical Locomotive(DL), Electrical Locomotive(EL), Diesel Locomotive, Metropolitan Commuter Train(CDC), VVVF and Resistance Controlled Multiple Unit, etc. EMU with the maximum speed of 150km/h is under the test run at the moment. Electrical Multiple Units for mainlines with 180km/h speed are supposed to be introduced as a substitute for Saemaulho Multiple Unit which is scheduled to be out of service. But the specification standard for the control board design of train driver's cab does not exist and there is no a study for layout and type of controlling device with driver's ergonomical approach. That's why the types of controller and operating are different from rolling stocks, which has high possibility of driver's human error and needs education whenever a new car comes in. Based on the opinion poll of drivers, design specification of safety engineering and ergonomics for controlling devices and safety facilities can improve exact control for devices and deal quickly with an emergency so as to improve rolling stock safety and operational efficiency.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.291-298
• /
• 2005

This paper describes the characteristic feather of propulsion system adopting mass production. The train formation is composed of 4 cars by 2 Motor cars and 2 Train cars. Acceleration rate must be 3.0 km/h/s or more when the car starts up to 35km/h by 16ton of passenger load. The system information supervision is easy because the system is controlled to perfect digital circuits, all information of an action is stored in a memory and is managed. The control system is composed of a fully digital circuit and a high level software such as C language. The DSP TMS320C31 is used for main processor and has the capability of 50MHz, 32bit floating point operation and has a C compiler. Therefore, the implementation of control algorithm and the change of function are easy. VVVF inverter using IGBT conducted variable combined test, environment test using chamber, interface test and field test etc.

• Proceedings of the KIPE Conference
• /
• 2000.07a
• /
• pp.548-551
• /
• 2000

The battery charger for high speed trail car is very important power source for the purpose of safty and system stability. it provides control power of VVVF, CVCF, DC/DC converter and inverter for traction motor. This paper included power circuit of the ZVZCS type battery charger for high speed trail car and battery included power circuit of the ZVZCS type battery charger for high speed trail car and inverter for traction motor. This paper included power circuit of the ZVZCS type battery charger for high speed trail car an battery charging algorithm. Also the optimum parallel operation of 50Kw battery charger for high speed trail car and charging control method of Ni-Cd battery illustrates validity and effectiveness through the experiments.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.642-645
• /
• 1997

This paper presents a propulsion control system for electric car to improve traction capability. The presented VVVF inverter was composed of as IGBT and the controller was full digitalized by using 32bit DSP. The improved PWM algorithms was adapted to improve traction characteristics. The system could be possible the higher reliablity, compact, light, low cost' and flexbility.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.603-605
• /
• 1996

The SLIM used in the conveyance system has been generally developed the controller based on the slip frequency control and the VVVF method to obtain the quick response for the position control signal. This paper deals with the trust control of the SLIM by vector control with Bang-Bang condition. Also, the control system is composed of the PI controller for soft start of the SLIM and the q-axis current controller for correction in phase with Space Vector for reducing the harmonic pulsation in low speed. The processing for vector control and robust dynamic breaking control is carried out by MC80196KC micro processor and IGBT module. The proposed scheme is verified through the computer simulation and experiments for the 10KW SLIM.