• The Journal of the Acoustical Society of Korea
• /
• v.22 no.5
• /
• pp.337-344
• /
• 2003

In DC/DC converter and VVVF inverter, which are the must dominant noise sources of Maglev train, noise is radiated from core and coil excited by MS(Magnetostriction). The main noise source of DC/DC converter is transformer whose spectrum shows strong peaks associated with harmonics of exciting frequency, On the other hand, LIM/VVVF noise is dominated by the harmonics of switching frequency, whereas harmonics of exciting frequency are not significant. As switching frequency is increased in VVVF inverter, it is shown that the harmonics are shifted to higher frequency range. If switching frequency is increased from 700㎐ to 2 ㎑, It is measured that noise can be reduced by 5 to 6 ㏈. Since complete mathematical description of MS phenomena is far beyond the present technology, vibration spectrum is investigated qualitatively in this paper, where effect of increasing switching frequency is confirmed.

• 전기의세계
• /
• v.37 no.6
• /
• pp.8-17
• /
• 1988

본 논문에서는 현재 실용화 되어 있는 인버터의 제어방식, 적용분야 및 인버터 사용에 따른 에너지 절감효과 등에 관해 기술하고자 한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.5
• /
• pp.515-521
• /
• 2000

This paper describes the field test results of IGBT VVVF inverter for the railway propulsion system. The 1,650kVA IGBT VVVF inverter has been developed. Therefore, the field test is performed in SMG 6 Line to confirm its the reliability and performance. The train consists of 4M4T and the electrical equipment for field test are as follows : VVVF inverter 4 sets, 16 traction motors and 2 SIVs. The propulsion system is composed with 1C4M(1-Controller 4-Motors). The results of propulsion system which have the excellent acceleration/deceleration and the jerk characteristics as well as starting ability on slope are taken through the field test.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.3
• /
• pp.20-28
• /
• 2002

This paper describes the time sharing type high frequency resonant inviter can be used as power of induction heating. This closed inverter can be obtained output frequency three times than switching frequency by composing three unit inviter of conventional Half-Bridge serial resonant inverter in parallel with input power source also, this reduce switching loss because it has ZVS function. The analysis of the proposed circuit is generally described by using the normailized proposed parameters. The principle of basic operating and the its charasteristics are extimated by the parameters such as switching frequency($\mu$), the variation of Phase angle($\phi$) of Phase-shift. Experimental results are presented to verify theoretical discussion. This preposed inverter will be able to be prastically used as a power supply in various fields as induction, heating application, DC-DC converter etc.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.4
• /
• pp.381-389
• /
• 2004

In this paper, it is suggested that instantaneous compensation PWM control for inverter without the smoothing capacitor Therefore, this inverter system has several advantages. It has small volume and low price to manufacture, decrease trouble rate of inverter, and has power factor correction effect because huge smoothing capacitor-less. And it has compact size control circuit to use analog integrator device. It could make the smoothing capacitor-less inverter for air-blower motor by using the instantaneous compensation PWM controller. This inverter system has small volume and value compare with the conventional VVVF control inverter.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1407-1413
• /
• 2011

This paper studied on the VVVF Inverter for 1C4M propulsion system of railway traction. The paper includes the comparison along a VVVF Inverter electric power conversion element for an electric railcar(GTO, IGBT). These inverters are composed of high power IGBTs and controlled by compact control units. The stack is simplified and optimized by using plate bus and IGBT driver units of hybrid-type.

• Journal of the Korean Society for Railway
• /
• v.3 no.1
• /
• pp.1-11
• /
• 2000

In this paper, the IGBT VVVF inverter for 1C4M propulsion system of railway traction is studied. The inverter is consisted of IGBT stacks, a DB unit, and a control unit. The test results of the combined system is given, which shows an excellent performance of the overall system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.4 no.6
• /
• pp.491-499
• /
• 1999

This paper is on the high perfonnance propulsion IGBT VVVF inverter adopted new technique for railways. To prove the high performance and stabilit~r of traction, running tests are carried out under the simulated condition alike real field. The tests are perfonned on not only a steady states but also a transient states such a as input voltage variation using inertia load equivalent to 160tons train. The vector control technique is a adopted to improve traction for 4 motors. The low switching synchronous PW1\l method based on a space v voltage vector modulation is pro\XlSed as the optimal method for propulsion system railway. The output voltage l is controlled continuously to six step by prolxlsed ovennodu]ation technique without sudden torque variation.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.6
• /
• pp.879-885
• /
• 1990

The geometrical algorithm for generating a 3-phase SPWM signal for VVVF (Variable Voltage, Variable Frequency) inverter drives is proposed. In this techniques, it is suitable for micro-processor based implementation since the pulsewiths are computable in real time from simple analytic expressions. System hardware consists of the inverter circuit and the 3-phase SPWM signal generating circuit. The inverter circuit is a 3-phase SPWM signal generating circuit is single board micro-processor consisting of Z-80A CPU, EPROMXI, CTC, PIO. The method of controlling VVVF at the inverter output is discussed here.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.1
• /
• pp.25-32
• /
• 1999

교류전동기 구동을 위한 산업용 전력전자 시스템은 전력회생용 양방향 컨버터, VVVF 인버터, 교류전동기 벡터제어기, 및 다양한 전기ㆍ기계적 연계 장치들을 포함하는 전기기계 복합시스템 특성을 지니기 때문에 전체 시스템에 대한 컴퓨터 시뮬레이션이 용이하지 않다. 일반적으로 이러한 복잡성을 해결하기 위한 방안으로서 시스템을 근사화시키고 이에 대한 수학적인 등가모델을 유도한 후 이를 이용하여 시뮬레이션을 행하고 있지만, 이 경우 실계통의 다이나믹특성을 정확히 표현할 수 없기 때문에 시뮬레이션 신뢰성이 저하될 수 있다 본 논문에서는 가변구조 제어기법에 의해 역률1 제어기능을 갖는 PWM 컨버터, VVVF 인버터 및 유도기 간접벡터제어기 둥을 포함하는 유도전동기 구동전력전자 시스템을 다이나믹 노드 기법(Dynamic Node Technique DNT)과 시뮬링크(Simulink)를 이용하여 실제회로 구성상태와 유사한 형태로 시뮬링크 윈도우상에서 설계하고, 이를 통해 시뮬레이션을 행할 수 있는 기법을 제시한다. 시뮬레이션 결과를 통하여 전력전자 시스템의 특성과 제시된 다이나믹 노드 기법과 시뮬링크를 이용한 시뮬레이션 기법의 유용성을 보였다.