• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.1083-1086
• /
• 2004

We applied the spray pyrolysis technique to prepare Mn-doped $BaMgAl_{10}O_{17}$ (BAM) particles with high photoluminescence, which could be used in the plasma display device as a green phosphor. Several preparation conditions were investigated in order to tail the vacuum ultraviolet (VUV) characteristics. Some portions of barium were replaced with strontium to improve the luminescent intensity of BAM:Mn particles under VUV excitation. The content of Mn and Sr was optimized to obtain high luminescent efficiency under VUV excitation. Finally, the optimized BAM:Mn green particles showed higher photoluminescence intensity than that of commercial $Zn_2SiO_4$ and comparable with commercial barium-aluminate phosphor.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.234.1-234
• /
• 2003

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.1355-1359
• /
• 2006

Due to its efficient red emission, $Eu^{3+}$ ion has been doped in various host materials. $GdCa_4B_3O_{10}:Eu^{3+}$ phosphor for red emission has been prepared by solid state reaction. Photoluminescence properties for the phosphor under UV and VUV excitation were investigated. The $GdCa_4B_3O_{10}:Eu^{3+}$ phosphor under both excitation conditions shows typical red emission spectrum centered at 611 nm with several weak peaks due to energy transfer from $^5D_O\;to\;^7F_J(J=1,2,3,4)$ of $Eu^{3+}$ ion. On the other hand, the activator content exhibiting the concentration quenching under UV and VUV irradiation is 10 mole% and 2.5 mole%, respectively.

• 한국분말재료학회지
• /
• 제15권5호
• /
• pp.399-404
• /
• 2008

Spray pyrolysis was applied to prepare $M_{3}MgSi_{2}O_{8}:Eu^{2+}$ (M=Ca, Sr, Ba) blue phosphor powder. The library of a Ca-Sr-Ba ternary system was obtained by a combinatorial method combined with the spray pyrolysis in order to optimize the luminescent property under vacuum ultraviolet (VUV) excitation. 10 potential compositions were chosen from the first screening. The emission shifted to longer wavelength as Ca became a dominant element and the emission intensity was greatly reduced in the composition region at which Ba is dominant element. On the base of the first screening result, the second fine tuning was carried out in order to optimize the luminescence intensity under VUV excitation. The optimal composition for the highest luminescence intensity was $(Ca_{1.7},\;Sr_{0.3},\;Ba_{1.0})Si_{2}O_{8}:Eu^{2+}$ which had the color coordinate of (0.152, 0.072) and about 64% emission intensity of $BaMgAl_{10}O_{17}$ (BAM) phosphor.

• 한국재료학회지
• /
• 제12권9호
• /
• pp.735-739
• /
• 2002

$(Y,Gd)BO_3$: Eu, $Zn_2$$SiO_4$ : Mn and $BaMgAl_{10}$ $O_{17}$ : Eu phosphors used in PDP were continuously irradiated by vacuum ultra violet generated from the penning gas (96%Ar+4%Xe) discharge and then the change of emitting intensity with time was investigated. The brightness of these phosphors decreased exponentially with VUV excitation time. The experimental data showed that the degradation rate increased in the order of $Zn_2$$SiO_4$ : Mn>(Y,Gd)$BO_3$: Eu>$BaMgAl_{10}$ $O_{17}$ : Eu phosphor. This different degradation property of phosphors was interpreted in terms of brightness saturation and stability against VUV irradiation. It was found that the degradation property of $(Y,Gd)BO_3$ : Eu red phosphor synthesized by ultrasonic thermal spray was superior to commercial phosphor.

• 한국세라믹학회지
• /
• 제41권5호
• /
• pp.381-387
• /
• 2004

현재 상용화되어 있는 PDP용 형광체의 물성에 있어서 청색 형광체는 열화, 색도변화, 휘도, 그리고 녹색 형광체는 잔광시간과 색순도, 적색 형광체의 경우에는 색순도에 대한 개선이 필요한 것으로 알려져 있다. 그 중 녹색 형광체로 Willemite 구조의 ZnSiO:Mn 형광체의 경우 발광효율은 우수하나 반면에 잔광시간이 길고 색순도(color purity)가 좋지 않다는 단점을 가지고 있다. 따라서 본 연구에서는 미세조정 조합화학기법을 이용하여 PDP에 적합한 새로운 고효율 형광체를 개발하였다. 화학적으로 정량인 가돌리늄 인산염(gadolinium phosphorous) 대신 인산을 과잉으로 첨가하여 탐색한 다음 과잉인산(excess phosphorous) 첨가 조성을 유지한 채로 가돌리늄(gadolinium)의 일정분율을 이트륨(yttrium)으로 치환하였다. 그 결과 최적 형광체 조성은 (G $d_{0.74}$ $Y_{0.11}$T $b_{0.15}$) $P_{1.15}$ $O_{{\delta}}$이였으며, 현재 상용화된 Z $n_2$ $SiO_4$:Mn 형광체에 비해 상대적으로 높은 발광효율을 나타내었으며, 잔광시간도 줄일 수 있게 되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.366-368
• /
• 2008

The discharge characteristics of He-Ne-Xe gas mixture with the variation of Xe content are investigated through the numerical simulation. VUV efficacy in the gas condition of low Xe content increases due to more excitation and the case of high Xe content shows the improvement of VUV efficacy with the increase of He content but decreased VUV efficacy after tthe He mixing ratio of He and Ne is 0.5 due to frequent ionization.

• 반도체디스플레이기술학회지
• /
• 제20권2호
• /
• pp.1-5
• /
• 2021

Ultraviolet (UVA)-emissive BaSiO₃:Ce³⁺ phosphor was astonishingly reproducible by vacuum-sintering at a high temperature through a simple solid-state reaction method. It was conveniently formed in BaSiO₃ phases. The compound showed the UVA emission and the UV-VUV excitation due to 5d-4f transitions from Ce³⁺ ions: emission peak at 380 nm with a 56 nm width. Its temperature dependence and vacuum UV excitability were examined for practical application as an excimer discharge lamp, which showed the high thermal stability (80% at 100℃) and the strong VUV excitations at 145 nm and 172 nm.

• 한국진공학회지
• /
• 제10권1호
• /
• pp.98-103
• /
• 2001

차세대 평판 디스플레이로서 플라즈마표시기(Plasma Display Pannel, PDP)는 현재 350 $\textrm{cd/cm}^2$의 휘도와 l lm/W 정도의 효율을 갖는 AC형 PDP가 개발되어 있으나, 음극선관(CRT)의 피크 휘도가 700 $\textrm{cd/cm}^2$, 효율이 수 1 m/W인 것을 감안하면 음극선관을 대체할 수 있는 표시기가 되기 위해서는 PDP의 휘도와 효율을 더욱 개선시킬 필요가 있다. 반사형 AC-PDP셀 내에서 가스 방전으로 발생된 진공 자외선(Vacuum Utraviolet, VUV) 중 배면판 쪽으로 진행되는 부분은 형광체를 여기시켜 가시광을 발생시키게 되지만, 전면판 쪽으로 진행되는 부분은 발광에 사용되지 못하고 있다. 본 연구에서는 PDP 셀 전면판의 유전체와 보호막 사이에 VUV를 반사시킬 수 있는 다이크로익 미러(Dichroic mirror)를 증착함으로써 셀 내의 VUV 이용 효율을 증가시켜 휘도와 효율을 향상시킬 수 있는 방법을 제안하였다. 다이크로익 미러를 정확하게 설계하기 위해서 미러에 사용되는 $MgF_2$, $LaF_3$, MgO 박막의 VUV 영역에서의 광학 계수(Optical Constant)를 실험과 시뮬레이션을 이용한 광도 측정법(Photometric method)을 통해서 구하였다 (1). 이 값들을 이용해서 플라즈마 표시기의 패널 방전에서 방출되는 빛의 휘도를 결정짓는 가장 중요한 요소인 147nm 부근의 진공자외선을 반사시킬 수 있는 다이크로익 미러를 설계하였다. 다이크로익 미러는 전자빔 증착기 (I-beam evaporator)를 이용하여 증착되었고, 박막의 광학 계수 결정을 위한 반사도(Reflectance), 투과도(Transmittance) 측정과 다이크로익 미러의 반사도 측정은 Reflectometer를 이용해 측정하였다. 패널 실험은 동일한 패널 내에 반쪽 면에만 다이크로익 미러를 증착시켜 방전 전압에 따른 휘도와 효율을 미러가 없는 면과 동일 조건하에 비교 측정하였다. 여러 방전 조건하에서 다이크로익 미러를 AC-PDP에 적용한 경우가 그렇지 않은 경우보다 휘도와 효율이 약 20-30% 정도 증가함을 확인하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.107-110
• /
• 1999

The ultrasonic spray method was employed to make (Y,Gd)BO$_3$:Eu Phosphor, and its optical properties under 147nm VUV and 254 nm UV excitations were characterized and then compared with that produced by the solid-state reaction. The mixed solution of acetate hydrates of Y, Gd, Eu and boric acid diluted in water or methanol was used as the precursor fur the spray. It was found that (Y,Gd)BO$_3$:Eu phosphor made by this ultrasonic spray had a spherical shape and fine particle size of 1${\mu}{\textrm}{m}$. The crystalline structure for the as-sprayed phosphor was amorphous, but it converted into the same polycrystalline phase of solid state reaction after post heat treatment at 110$0^{\circ}C$ for 2hr. The emitting intensity under VUV and UV excitations for the spray-formed (Y,Gd)BO$_3$:Eu phosphor, however, was inferior to the later one. The excitation spectra were also studied and compared under VUV and UV excitations to explain the change of emitting intensity with Gd substitution in (Y$_{1-x}$ Gd$_{x}$)BO$_3$:Eu Phosphors made by spray and solid state reaction.on.