• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.54-57
• /
• 1988

In this thesis, after the inverted pendulum being made, its state equation was established with parameters obtained by the state space approach and its position stabilization control was performed with VSS. The switching function of VSS was obtained from pole placement method and as the result of VSS control was compared with that of optimal regulator control, its robustness was clarified in sliding mode. The position and stabilization control of the inverted pendulum Wstem were acomplished with VSS.

• Journal of Korean Society for Quality Management
• /
• v.32 no.4
• /
• pp.252-264
• /
• 2004

Variable sampling Interval (VSI) control charts vary the sampling interval according to value of the control statistic while the sample size is fixed. It is known that control charts with 2-state VSI scheme, which uses only two sampling intervals, give good statistical properties. Variable sample size (VSS) control charts vary the sample size according to value of the control statistic while the sampling interval is fixed. In the VSS scheme no optimal results are known for the number of sample sizes. It is also known that the variable sampling rate (VSR) $\bar{X}$ control chart with 2-state VSS and 2-state VSI scheme leads to large improvements In performance over the fixed sampling rate (FSR) $\bar{X}$ chart, but the optimal number of states for sample size Is not known. In this paper, the VSR Χ charts with multi-state VSS and 2-state VSI scheme are designed and compared to 2-state VSS and 2-state VSI scheme. The multi-state VSS scheme is considered to, achieve an additional improvement by switching from the 2-state VSS scheme. On the other hand, the multi-state VSI scheme is not considered because the 2-state scheme is known to be optimal. The 3-state VSS scheme improves substantially the sensitivity of the $\bar{X}$ chart especially for small and moderate mean shifts.

• Journal of Korean Society for Quality Management
• /
• v.30 no.2
• /
• pp.99-117
• /
• 2002

Variable sampling interval(VSI) and variable sample size(VSS) control charts vary the sampling rate for the next sample depending on the current chart statistic. This paper develops EWMA charts with the VSI and VSS features, and investigates the effectiveness of these charts in context of an economic model. The economic properties of these charts are evaluated by using Markov chain methods. The model contains cost parameters which allow the specification of the costs associated with sampling, false alarms, and operating off target. This economic model can be used to quantify the cost saving that can be obtained by using control charts with the VSI and VSS features instead of with the fixed sampling rate(FSR) feature, and can also be used to gain insight into the way that control charts with the VSI and VSS features should be designed to achieve optimal economic performance. The economic performance of X charts with the VSI and VSS features is also considered.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10a
• /
• pp.927-930
• /
• 1992

VSS identification approach is based on following concept, i.e. while in sliding motion, the switching of control inputs refects system uncertainites. Therefore, if there exist some operations that make the information form the switiching control inputs be achievable, then the unknown parameters can be actually identification mechanisms which can fully make use of the available information. Two different types of VSS identifiers are taken into consideration. The first type uses adjustable model whose structure is similar to that of identified systems. From the viewpoint of contro, this type of VSS identifiers may be regraded as direct identifier vecause the identified system is handled as an open loop. On the other hand, if the identified system is controlable in the sense of VSS(sliding mode can be generated through chosing control inputs), the second type of VSS identifier, the indirect VSS identifier, can be constructed according to the linerized system strucutre while staying in sliding mode. Therefroe it can be applied to some nonlinear systems which are not linear in parametric space by general identification algorithms, whereas linear in parametric space when sliding mode is existed.

• International Journal of Aeronautical and Space Sciences
• /
• v.9 no.1
• /
• pp.162-168
• /
• 2008

A design objective for variable stability flight control system is to develop a controller of in-flight simulation capability that forces the aircraft being flown to follow the dynamics of other aircraft. This paper presents a model-following variable stability control system (VSS) for in-flight simulation which consists of feedforward and feedback control laws, the aircraft dynamic model to be simulated, and switching and fader logics to reduce the transient effect between two aircraft dynamics. The separate design techniques for feedforward and feedback control law proposals are based on model matching and augmented linear quadratic (LQ) techniques. The system allows pilots to select and engage VSS mode, and when deselected, the aircraft reverts to the baseline flight control system. Both the baseline flight control laws and VSS control laws are computed continuously during flight. Initialization of the state values are necessary to prevent instability, since VSS control laws have integrators and filters in longitudinal, and lateral/directional axes. This paper demonstrates and validates the effectiveness and quality of VSS with F-16 models embedded in T-50 in-flight simulation aircraft.

• Journal of Korean Society for Quality Management
• /
• v.31 no.3
• /
• pp.126-135
• /
• 2003

A basic assumption in standard applications of control charts is that the observations are statistically independent. However, this assumption is often violated from processes in many industries. The presence of autocorrelation has a serious impact on the performance of control charts, causing a dramatic increase in the frequency of false alarms. This paper considers a process in which the observations can be modeled as a first order autoregressive(AR(1)) process, and develops (equation omitted) charts with the variable sample size(VSS) scheme for monitoring the mean of this process.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.127-134
• /
• 2015

In this note, a continuous sliding surface transformed variable structure systems by the saturation function is presented for MIMO uncertain linear plants. A discontinuous sliding surface transformed VSS is proposed theoretically. The closed loop exponential stability together with the MIMO existence condition of the sliding mode on the predetermined sliding surface is investigated. For practical applications, a continuous approximation of the discontinuous VSS is made by means of the saturation function. The discontinuity of the control input as the inherent property of the VSS is much improved in view of the practical aspects. Through a design example and simulation studies, the usefulness of the proposed continuous transformed VSS controller is verified.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.591-595
• /
• 1989

The application of Variable Structure System (VSS) to the position control of a Permanent Magnet Synchronus Motor is discussed. VSS is expected to be a powerful and potential tool to construct new control strategy for ac machines, since the resulting system shows robust performance to parametic variations and disturbances. An adaptive VSS which can make corrections or adjustments in the parameters of the control device of the VSS in accordance with the current values of the plant parameters and the constraints on the control is preposed. Various simulation results are reported to show the validity of the proposed control method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10a
• /
• pp.898-904
• /
• 1987

A new control algorithm using the VSS theory is developed for accurate trajectory control of robot manipulators. This paper focuses on the implementation of VSS controller with smoothing laws in the design of effective tracking control for robotic arms. The VSS controller for multi-linkage robot arm is realized using balance condition and its simplification which possesses powerful smoothing capability to reduce or even remove undesirable chattering and meanwhile keep the robust characteristic to reject system uncertainties. The design principle of selecting different smoothing methods, which aims at achieving trade-off between smoothing and robust behaviors while considering the actual system constraints, is also given and further confirmed through experimental results.

• Journal of the Korean Society for Precision Engineering
• /
• v.6 no.2
• /
• pp.65-76
• /
• 1989

The objective of this paper is to design the variable structure system(VSS) controller for the tracking control of excavator which is driven by electro-hydraulic servomechansim. It is generally agreed that the dynamic characteristics of the robot arm such as excavator are coupled, time varying, and highly nonlinear, and also hydraulic system contains nonlinear characteristics in itself, so performing exact position control and trajectory tracking control need remarkable consideration. To solve this porblem, this system was designed as a variable structure system. The salient feature of VSS is that the sliding mode occur on a switching surface. While in sliding mode, the system remains insensitive to parameter variations and disturbances. This control algorithm was applied to a hydraulic excavator by simulaltion and to a simulator by experiment. And its effectiveness was verified. And the results of VSS for the electro-hydraulic excavator was compared with that of the PID when load disturbances and system parameter variations exist.