• 한국환경보건학회지
• /
• 제15권2호
• /
• pp.41-49
• /
• 1989

The assay on microbial dehydrogenase activity by using TTC was investigated. The experimental results are summarized as follows: 1. The TF production was affected by dissolved oxygen. Dissolved oxygen in samples could be effectively removed by adding $Na_{2}SO_{3}$ as reductant prior to incubation. 2. The toxic effect on TF formation was observed at up to 0.1% of final TTC concentration when VSS concentration was 2.7g/l. As the VSS concentration increased the effect decreased. 3. It was clearly revealed that the TF generation rate decreased with increasing VSS concentration. The dilution of sludge could be applicable when VSS level is below 3.5g/l. 4. The TF production of endogenous phase (De) could be used as a measure for the viable fraction of sludge over various sludge ages. The additional TF production (Ds) due to extracellular substrate responded to De, not to VSS concentration.

• Journal of the Korean Statistical Society
• /
• 제23권2호
• /
• pp.403-420
• /
• 1994

An economic design of the $\bar{X}-R$ chart using variable sample size (VSS) scheme is proposed in this paper. In this design the sample size at each sampling time changes according to the values of the previous two sample statistics, sample mean and range. The VSS scheme uses large sample if the sample statistics appear near inside the control limits and smaller sample otherwise. The set of process parameters, such as the sampling interval, control limits and the sample sizes, are chosen to minimize the expected cost per hour. The efficiency of the VSS scheme is compared to the fixed sample size one for cases where there is multiple of assignable causes. Percent reductions of the expected cost in the VSS design are calculated for some given sets of cost parameters. It is shown that the VSS scheme improves the confidence of the procedure and performs statistically better in terms of the number of false alarms and the average time to signal, respectively.

• 상하수도학회지
• /
• 제18권1호
• /
• pp.15-21
• /
• 2004

The purpose of this research was to investigate loading rate of influent for acidogenic fermentation. Laboratory batch experiments were conducted, at $35^{\circ}C$, HRT 18hr, pH 6 and used 3.5L reactor. Loading rate of influent was varied 2.0 to 4.0g VSS/L, TOA concentration is decreased according to increasing loading rate Over 2.5g VSS/L. When loading rate is 2.0g VSS/L, hydrolysis percentage show the maximum value of 87%. Most of SCFA is consist of HAc, HPr, I-HBu and MBu. HAc concentration is 5,233mg/L in the 2.0g VSS/L condition. So, for this study, we think that limiting loading rate is 2.5g VSS/L. SCFA species was investigated to HAc, HPr, I-HBu and n-HBu during our studying. HAc/SCFA ratio is about 89.3%, SCFA production rate is highest to $1,104mg\;COD/L/d{\cdot}gPCOD$ for 2.0g VSS/L loading rate.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권1호
• /
• pp.162-168
• /
• 2008

A design objective for variable stability flight control system is to develop a controller of in-flight simulation capability that forces the aircraft being flown to follow the dynamics of other aircraft. This paper presents a model-following variable stability control system (VSS) for in-flight simulation which consists of feedforward and feedback control laws, the aircraft dynamic model to be simulated, and switching and fader logics to reduce the transient effect between two aircraft dynamics. The separate design techniques for feedforward and feedback control law proposals are based on model matching and augmented linear quadratic (LQ) techniques. The system allows pilots to select and engage VSS mode, and when deselected, the aircraft reverts to the baseline flight control system. Both the baseline flight control laws and VSS control laws are computed continuously during flight. Initialization of the state values are necessary to prevent instability, since VSS control laws have integrators and filters in longitudinal, and lateral/directional axes. This paper demonstrates and validates the effectiveness and quality of VSS with F-16 models embedded in T-50 in-flight simulation aircraft.

• 유기물자원화
• /
• 제29권3호
• /
• pp.35-40
• /
• 2021

초음파로 활성화된 과황산염을 이용한 슬러지의 가용화 정도를 확인하기 위하여 VSS 감량화율, 가용화율 및 체외고분자물질을 주요 지표로 측정하여 초음파 및 수산화나트륨을 이용한 알칼리·초음파 방법과 비교하였다. 과황산염·초음파 조건에서 VSS 감량화율은 27.6%, 가용화율은 58.9%로 증가하였고, TB-EPS as Carbohydrate와 Protein은 각각 770 mg/L, 2,162 mg/L 용출되었다. 초음파 및 알칼리·초음파 방법에 비하여 VSS감량화율 및 가용화율이 높았으며, TB-EPS지표로 볼 때 세포의 파괴 및 용출에서도 과황산염·초음파 조건에서 더 효율적이었다.

• 대한환경공학회지
• /
• 제33권7호
• /
• pp.485-491
• /
• 2011

본 연구는 2개의 간헐혐기조, 막분리호기조 및 슬러지 가용화로 구성된 유로변경형 membrane bioreactor의 운영을 통하여 도시 하수의 영양염류 제거 특성을 규명하였다. 수리학적 체류시간(HRT)과 운영 여과 플럭스의 평균값은 각각 6.5 시간과 $20.4L/m^2{\cdot}hr$ (LMH)이었으며, 공정을 운전한 결과, $COD_{Cr}$, SS, TN 및 TP의 평균 제거율은 각각 94.0%, 99.3%, 99.9%, 69.9%와 66.9%이었다. 슬러지 생산계수, SDNR, SNR, SPPR 및 SPUR은 각각 0.34 kg VSS/kg BOD d, $0.067mg\;NO_3-N/mg\;VSS{\cdot}d$, $0.028mg\;NH_4-N/mg\;VSS{\cdot}d$, 16.0 mg P/g VSS d 및 2.1 mg P/g VSS d였다. 또한, 생산된 슬러지의 평균 질소 및 인 함량은 각각 8.9%와 3.5%였다.

• 대한환경공학회지
• /
• 제31권2호
• /
• pp.109-113
• /
• 2009

본 연구는 혐기조, 안정화조, 무산소조, 막분리호기조로 구성된 membrane bioreactor의 운영을 통하여 도시 하수의 영양염류 제거 특성을 규명하였다. 수리학적 체류시간(HRT)과 슬러지 체류시간(SRT) 및 운영 여과 플럭스의 평균값은 각각 6.2시간, 34.1일과 19.6 L/$m^2$/hr (LMH)이었으며, 공정을 운전한 결과, $COD_{Cr}$, SS, TN 및 TP의 평균 제거율은 각각 94.3%, 99.9%, 69.4% 및 74.6%이었다. 슬러지 생산계수, SDNR, SNR, SPPR 및 SPUR은 각각 0.653 kgVSS/kgBOD/d, 0.044 $mgNO_3$-N/mgVSS/d, 0.035 $mgNH_4$-N/mgVSS/d, 51.0 mgP/gVSS/d 및 5.4 mgP/gVSS/d였다. 또한, 생산된 슬러지의 평균 질소 및 인 함량은 각각 8.86%와 3.5%였다.

• 한국인터넷방송통신학회논문지
• /
• 제15권1호
• /
• pp.131-137
• /
• 2015

본 논문은 QAM 신호를 전송하는 시스템에서 시분산 채널에서 발생되는 진폭과 위상 찌그러짐에 의한 부호간 간섭을 경감시키기 위한 적응 등화 알고리즘인 MMA (Multiple Modulus Algorithm)에서 오차 신호의 비선형 함수를 이용하여 등화 성능을 개선할 수 있는 VSS-MMA (Variable Step Size - MMA) 알고리즘에 관한 것이다. 기존 MMA에서는 고정 스텝 크기를 이용하여 적응 등화기의 탭 계수를 얻지만, 제안 VSS-MMA에서는 오차 신호의 비선형성을 기본으로 가변 스텝 크기를 적용하여 탭 계수를 얻을 수 있다. 가변 스텝 크기을 이용하므로서 기존 MMA보다 개선된 등화 성능을 얻을 수 있음을 컴퓨터 시뮬레이션을 통해 확인하였으며, 이를 위한 성능 지수로는 등화기 출력 신호 성상도, 잔류 isi양, 최대 찌그러짐과 MSE, SER을 사용하였다.

• 대한치과교정학회지
• /
• 제50권5호
• /
• pp.293-303
• /
• 2020

Objective: To investigate the three-dimensional (3D) surgical accuracy between virtually planned and actual surgical movements (SM) of the maxilla in two-jaw orthognathic surgery. Methods: The sample consisted of 15 skeletal Class III patients who underwent two-jaw orthognathic surgery performed by a single surgeon using a virtual surgical simulation (VSS) software. The 3D cone-beam computed tomography (CBCT) images were obtained before (T0) and after surgery (T1). After merging the dental cast image onto the T0 CBCT image, VSS was performed. SM were classified into midline correction (anterior and posterior), advancement, setback, anterior elongation, and impaction (total and posterior). The landmarks were the midpoint between the central incisors, the mesiobuccal cusp tip (MBCT) of both first molars, and the midpoint of the two MBCTs. The amount and direction of SM by VSS and actual surgery were measured using 3D coordinates of the landmarks. Discrepancies less than 1 mm between VSS and T1 landmarks indicated a precise outcome. The surgical achievement percentage (SAP, [amount of movement in actual surgery/amount of movement in VSS] × 100) (%) and precision percentage (PP, [number of patients with precise outcome/number of total patients] × 100) (%) were compared among SM types using Fisher's exact and Kruskal-Wallis tests. Results: Overall mean discrepancy between VSS and actual surgery, SAP, and PP were 0.13 mm, 89.9%, and 68.3%, respectively. There was no significant difference in the SAP and PP values among the seven SM types (all p > 0.05). Conclusions: VSS could be considered as an effective tool for increasing surgical accuracy.

• 한국인터넷방송통신학회논문지
• /
• 제19권5호
• /
• pp.101-106
• /
• 2019

본 논문에서는 nonconstant modulus 신호 전송에서 채널에서 발생되는 부호간 간섭 영향을 줄이기 위한 FC-MMA 적응 등화 알고리즘에 가변 스텝 크기를 적용하여 등화 성능을 개선할 수 있는 VSS-FC-MMA 알고리즘을 제안한 후, 이의 개선된 성능을 확인하였다. FC-MMA 는 적응 등화를 위한 오차 신호를 얻을 때 신호 심볼의 레벨수를 고려한 수정된 dispersion constant와 고정 스텝 크기를 적용하여 MMA의 수렴 속도를 개선할 수 있지만 정상 상태에서 등화 성능이 열화된다. 논문에서 제안하는 VSS-FC-MMA는 기존 FC-MMA와 가변 스텝 크기를 적용하므로서 정상 상태에서 등화 성능을 개선할 수 있으며, 이를 컴퓨터 시뮬레이션을 통해 확인하였다. 이를 위하여 동일한 채널과 신호대 잡음비를 적용할 때 알고리즘의 신호 복원 능력 및 성능 비교를 위한 지수로는 잔류 isi, MSE와 SER을 적용하였다. 시뮬레이션의 결과 제안 VSS-FC-MMA는 FC-MMA보다 잔여량과 SER 성능이 개선되지만, 수렴 속도에서는 1.7배 정도 늦어짐을 확인하였다.