• 대한산업공학회지
• /
• 제39권1호
• /
• pp.55-60
• /
• 2013

VNA(Very Narrow Aisle) forklift trucks require narrower aisle width than traditional counter-balanced trucks do because only the fork assembly turns in the aisle instead of the entire body of the truck. Substituting the VNA trucks for the existing counter-balanced trucks will result in the significant increase of revenue due to the increased storage capacity in the distribution centers. In this study, we present an economic analysis model for the substitution, in which we present a closed-form equation for the number of racks to stay unmoved, while maximizing the additional storage capacity; and resulting payback period of the substitution. A case study shows the payback period of only 8.1 months, indicating that this substitution is very profitable.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권6호
• /
• pp.589-593
• /
• 2013

An efficient measurement methodology is proposed to construct the scattering parameters of a multi-port device using a four-port vector network analyzer (VNA) without the external un-terminated ports. By using the four-port VNA, the reflected waves from the un-terminated ports could be minimized. The proposed method significantly enhances the accuracy of the S-parameters with less number of measurements compared to the results of classical renormalization technique which uses two-port VNA. The proposed method is validated from the measured data with the coupled 8-port micro-strip lines.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.171-174
• /
• 2002

In this study, we proposed a specification which is able to estimate tile uncertainty more easily and quickly and also able to maintain a confidence level when measuring tile magnitude and phase of 1-port and 2-port transmission.reflection coefficient using a VNA and attached coaxial cable probes. This proposed specification is available when it needs extra special condition of uncertainty estimation and when there is no additional standard equipment like as beadless airline or mismatch standard at the measurement institute. We compared and examined this proposed uncertainty estimation method with recommended EA specification and Agilent specification. As a result, we think that this proposed specification can be used as a reference for uncertainty estimation and calculation of VNA system, that is, a reference based on the IS0/1EC 17025 requirements.

• 대한수의학회지
• /
• 제55권4호
• /
• pp.227-232
• /
• 2015

Akabane and bovine ephemeral fever (BEF) viruses cause vector-borne diseases. In this study, inactivated Akabane virus (AKAV)+Bovine ephemeral fever virus (BEFV) vaccines with or without recombinant vibrio flagellin (revibFlaB) protein were expressed in a baculovirus expression system to measure their safety and immunogenicity. Blood was collected from mice, guinea pigs, sows, and cattle that had been inoculated with the vaccine twice. Inactivated AKAV+BEFV vaccine induced high virus neutralizing antibody (VNA) titer against AKAV and BEFV in mice and guinea pigs. VNA titers against AKAV were higher in mice and guinea pigs immunized with the inactivated AKAV+BEFV vaccine than in animals inoculated with vaccine containing revibFlaB protein. Inactivated AKAV+BEFV vaccine elicited slightly higher VNA titers against AKAV and BEFV than the live AKAV and live BEFV vaccines in mice and guinea pigs. In addition, the inactivated AKAV+BEFV vaccine was safe, and induced high VNA titers, ranging from 1 : 64 to 1 : 512, against both AKAV and BEFV in sows and cattle. Moreover, there were no side effects observed in any treated animals. These results indicate that the inactivated AKAV+BEFV vaccine could be used in cattle with high immunogenicity and good safety.

• 대한전자공학회논문지SD
• /
• 제42권4호
• /
• pp.45-52
• /
• 2005

본 논문은 인쇄 회로 기판에 있는 through hole vias를 시간 영역과 주파수 영역 측정을 통하여 characterization을 하였다. Via characterization은 Time Domain Reflectometry (TDR)를 이용하여 시간 영역에서 측정하고 HSPICE fitting 시뮬레이션으로 via 모델 파라미터를 추출하였다. 또한 2 port Vector Network Analyzer (VNA)로 주파수 영역에서 측정하고 Advanced Design System (ADS) fitting 시뮬레이션 하였다. VNA를 이용한 측정에서는 같은 평면에서 probing하기 위해 ABCD matrix 를 이용하여 do-embedding 수식을 유도하였다. 그리고 single via characterization 결과를 바탕으로 differential signaling을 위한 differential via characterization을 TDR과 VNA 측정을 통하여 수행하였다. Differential via characterization은 TDR 모듈의 odd mode와 even mode 소스들을 이용하여 시간 영역에서 측정하고 HSPICE로 fitting 시뮬레이션으로 모델 파라미터를 추출하였다. 추출된 모든 data는 측정 및 simulation 결과를 비교한 결과 single via의 경우, 최대 $14\%$, differential via의 경우 최대 $17\%$의 오차를 나타내었다.

• 한국정보과학회 언어공학연구회:학술대회논문집(한글 및 한국어 정보처리)
• /
• 한국정보과학회언어공학연구회 2007년도 제19회 한글 및 한국어 정보처리 학술대회
• /
• pp.165-168
• /
• 2007

본 연구에서는 문서의 문장들을 순위화하여 추출하는 일반적인 문서 요약 방법론을 소개한다. 첫 번째 단계는 주제와 관련되는 동사, 명사, 형용사(VNA) 단어들의 집합을 구하여 각 문장의 주제 관련성 정도를 결정하며, 두 번째 단계는 단어들의 의존관계를 통해 각 문장의 정보 함유량을 판단한다. 두 개의 방법은 모두 주제와 관련된 정보를 많이 내포하는 문장에 중요도를 부여하고 있다. 이러한 방법은 주제와 연관성이 높고 정보전달성이 높은 문서요약을 만들기 위함이다. 생성된 문서요약본의 성능평가는 문서요약의 결과로 추출된 문장들과 설문에 의해 추출된 문장들의 일치율에 의해 시행되었으며 68%의 일치율을 보였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.137-138
• /
• 2006

In this paper, we study the algorithm for the multiport measurements using the 2port VNA(Vector network Analyzer). We explain the conversion algorithm which the open impedance to the matched impedance(50 ohm), and then we apply this algorithm to the 4 port VNA measurement. Finally, we discuss the reliability of this algorithm.

• Journal of electromagnetic engineering and science
• /
• 제10권4호
• /
• pp.282-289
• /
• 2010

A simplified, practical vector network analyzer (VNA) that uses mature radio-over-fiber technology has been designed and demonstrated. The measurement concept allows the full S-parameters of a microwave device (or antenna) to be obtained while minimizing the detrimental effects of electrical cables, which are replaced with a photonic link. A variety of high-frequency light modulation schemes with frequency sweeping capabilities are presented to realize a one-path (single, forward), frequency-multiplied optical link for VNA applications. Using the photonic one-path link, full two-port S-parameters have been extracted based on five-term error modeling, which has half the error terms compared with the standard duplex configuration. The S-parameters of a microwave filter and antenna measured using frequency-multiplied optical links are found to be in good agreement with those obtained using a conventional VNA.

• KEPCO Journal on Electric Power and Energy
• /
• 제1권1호
• /
• pp.79-84
• /
• 2015

Transformer is widely used element on power system and industrial area. Especially the transformers installed at power system are exposed to an environment of arbitrary changed. Thus the prediction of degradation and the analysis of response to impulse are important. To conduct those works, the electrical characteristics of system should be analyzed, effectively. But the analysis of electrical characteristic in electric machine level such as pole and pad-mounted transformer is almost no, thus commercial VNA (Vector Network Analyzer) is used to getting the response in wide frequency range. However, the output power of VNA is usually under 10mW, so verification for effectiveness of measuring electrically large component should be conducted, firstly. Next, after getting total S-parameter of transformer, predicting impulse response can be performed in time-domain with circuit simulator. In this paper, it is introduced that verification effectiveness of VNA using transfer function from SFRA (Sweep Frequency Response Analyzer), firstly. Next, total S-parameter, six by six matix form, was built using measured 2 port S-parameter from vector network analyzer. To get the response to impulse which is defined by IEC 60060-1, time-domain simulation is conducted to ADS (Advenced Design System) circuit simulator.

• 전기학회논문지
• /
• 제56권6호
• /
• pp.1105-1110
• /
• 2007

This paper describes an equivalent circuit modeling of 4-port connector system. A coupled transmission line was designed and fabricated, mimicking a 4-port connector system, and then S-parameters were measured using 4 port VNA (Vector Network Analyzer). The S-parameters from measurement and from Full-wave simulator coincided quite nice. By using these S parameters, an equivalent circuit parameters for a 4-port system was obtained. The time domain response from the equivalent circuit model matched to the signals, which was measured using TDR(Time Domain Reflectometry) meter. We were also convinced that there should be enough bandwidth to get a meaningful time domain result from Fourier inverse transformation of the S parameters. In addition, we applied the conversion algorithm to the 4-port connector system, which calculates the S-parameters of a 4 port system using the data from a 2-port VNA with the other ports open. Comparison of the two data, one from measurement and the other one from the conversion algorithm, was made in this manuscript.