• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.596-599
• /
• 2003

In this paper, we designed the digital pulse motor control chip including a circular interpolation function. The proposed algorithm in this paper is a nonparametric cure generation algorithm (Jordan's algorith) and a very simple algorithm. So the design for this algorithm used a small number of gates. Also an average error is fairly low. The max output speed is 4Mpps(Pulse per second), the max input frequency is 16MHz and the chip is useful for the stepping and servo motors. The software contains one or two, and many axes linear interpolation algorithm and two axes circular interpolation algorithm.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5C
• /
• pp.654-654
• /
• 2004

본 논문에서는 이산웨이블렛 변환을 이용한 영상 압축 프로세서를 하드웨어로 구현하였다. 웨이블렛 변환을 위하여 필터뱅크 및 피라미드 알고리즘을 이용하였고 각 필터들은 FIR 필터로 구현하였다. 병렬구조로 이루어져 동일 클럭 싸이클에서 하이패스와 로패스를 동시에 수행함으로써 속도를 향상시킬 뿐 아니라 QMF 특성을 이용하여 DWT 연산에 필요한 승산기의 수를 절반으로 줄임으로써 하드웨어 크기를 줄이고 이용효율 또한 높일 수 있다. 다중 해상도 분해 시 필요한 메모리 컨트롤러를 하드웨어로 구현하여 DWT 계산이 수행되므로 이 융자는 단순한 파라메터 입력만으로 효과적인 압축율을 얻을 수 있도록 구조적으로 설계하였다. 실시간 영상압축 프로세서의 성능 예측을 위하여 MATLAB을 통하여 시뮬레이션 하였고, VHDL을 이용하여 각 모듈들을 설계하였다. 설계한 영상압축기는 Leonaro-Spectrum에서 합성하였고, ALTERA FLEX10KE(EPF10K100 EFC256) FPGA에 이식하여 하드웨어적으로 동작을 검증하였다. 설계된 부호화기는 512×512 Woman 영상에 대하여 33㏈의 PSNR값을 갖는다. 그리고 설계된 프로세서를 FPGA 구현 시 35㎒에서 정상적으로 동작한다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.8 s.338
• /
• pp.17-24
• /
• 2005

This paper proposes a Decision Feedback Equalizer (DFT) with an error feedback filter for blind channel equalization. The proposed equalizer uses Least Mean Square(LMS) Algorithm and Multi-Modulus Algorithm (MMA), and has been designed for 64/256 QAM constellations. The existing MMA equalizer uses either two transversal filters or feedforward and feedback filers, while the proposed equalizer uses feedforward, feedback and error feedback filters to improve the channel adaptive performance and to reduce the number of taps. The proposed equalizer has been simulated using the $SPW^{TM}$ tool and it shows performance improvement. It has been modeled by VHDL and logic synthesis has been performed using the $0.25\;\mu m$ Faraday CMOS standard cell library. The total number of gates is about 190,000 gates. The proposed equalizer operates at 15 MHz. In addition, FPGA vertification has been performed using FPGA emulation board.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.452-459
• /
• 2020

The electric actuator receives the user's command input signal (open/closed/stop), checks the status of various sensors (valve position, rotational force, motor status, etc.)in the actuator, and controls the motor forward/reverse to open and close the valve. It is a device that outputs the current state of an actuator (valve) and is used in various fields such as dams, power plants, water and sewage facilities, and oil pipeline facilities. If an electric actuator is installed in a power plant and a problem occurs during operation, it can cause a large economic loss, so system reliability is vert important. In this study, in order to increase the safety of the electric actuator, the development of an electric actuator control device capable of setting the ON/OFF time in hardware was conducted to solve the reliability problem that may occur in software. In addition, the electric actuator control device development environment was developed using Xilinx's Spartan7 FPGA and Altium tool.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1577-1580
• /
• 2004

This paper proposes a design and implementation of transversal adaptive digital filter using LMS (Least Mean Squares) adaptive algorithm. The filter structure is based on Distributed Arithmetic (DA) which is able to calculate the inner product by shifting and accumulating of partial products and storing in look-up table, also the desired adaptive digital filter will be multiplierless filter. In addition, the hardware implementation uses VHDL (Very high speed integrated circuit Hardware Description Language) and synthesis using FLEX10K Altera FPGA (Field Programmable Gate Array) as target technology and uses Leonardo Spectrum and MAX+plusII program for overall development. The results of this design are shown that the speed performance and used area of FPGA. The experimental results are presented to demonstrate the feasibility of the desired adaptive digital filter.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.9
• /
• pp.65-71
• /
• 2004

This paper describes a new adaptive algorithm which can reduce the required computation quantities in the adaptive filter. The proposed S-LMS algorithm uses only the signs of the normalized input signal rather than the input signals when coefficients of the filter are adapted. By doing so, there is no need for the multiplications and divisions which are mostly responsible for the computation quantities. To analyze the convergence characteristics of the proposed algorithm, the condition and speed of the convergence are derived mathematically. Also, we simulate an echo canceller adopting this algorithm and compare the performances of convergence for this algorithm with the ones for the other algorithm. As the results of simulations, it is proved that the echo canceller adopting this algorithm shows almost the same performances of convergence as the echo canceller adopting the SIA algorithm.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2006.05a
• /
• pp.119-123
• /
• 2006

본 논문에서는 마이크로프로세서의 기능을 수행하는 데 필수적이며 사용빈도가 높은 총 64개의 명령어를 정의한 후 이를 처리할 데이터패스를 구성해 스테이트 머쉰으로 제어하는 방식으로 실용적 8비트 마이크로프로세서를 VHDL로 설계를 하고 FPGA로 구현했다. 통상 마이크로프로세서 관련 논문에서는 기능적 시뮬레이션까지만 했거나, 인터럽트 기능이 없든지, 하드웨어로 구현을 하지 않았거나, 또는 개발 관련 내용이 자세히 제시되지 않았었다. 본 논문에서는 데이터 이동, 논리, 가산 연산뿐만 아니라 분기, 점프 연산도 실행할 수 있도록 해 연산 및 제어용도에 적합하도록 하였고, 스택, 외부 인터럽트 기능까지도 지원하도록 해 그 자체로서 완전한 실용적 마이크로프로세서가 되도록 하였다. 또한 프로그램 ROM까지도 칩 안에 넣어 전체 마이크로프로세서를 단일 칩으로 구현하였다. 타이밍 시뮬레이션으로 검증 후 제작 과정을 통해, 설계된 마이크로프로세서가 정상적으로 동작함을 확인하였다. Altera MAX+.PLUS II 통합개발환경 하에서 EP1K50TC144-3 FPGA 칩으로 구현을 하였고 최대 동작주파수는 9.39MHz까지 가능했고 사용한 로직 엘리먼트의 개수는 2813개로서 논리 사용률은 97%이었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.9
• /
• pp.1702-1708
• /
• 2007

Dragon Stream Cipher is proposed for software base implementation in the eSTREAM project. Now this stream cipher is selected as a phase 3 focus candidate. Dragon is a new stream cipher contructed using a single word based NIFSR(non-linear feed back shift register) and 128/256 key/IV(Initialization Vector). Dragon is the keystream generator that produce 64bits of keystream. In this paper, we present an implementation of Drag(m stream cipher algorithm in hardware. Finally, the implementation is on Altera FPGA device, EP3C35F672I and the timing simulation is done on Altera's Quartus II. A result of 111MHz maximum clock rate and 7.1Gbps is throughput is obtained from the implementation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.04a
• /
• pp.1277-1280
• /
• 2009

본 논문은 ITU-T 권고안 J-38 부록 B에 명시된 전송방식의 분석 및 시뮬레이션을 토대로 성능을 분석 하였으며 FPGA 구현시 야기되는 문제점을 나타내고, 해결방안을 제시하였다. 구현상의 문제점으로는 크게 두 가지로 분류되는데, 첫째로 다양한 부호화 방식과 변조방식 그리고 심볼 단위 및 비트 단위의 처리로 인해 많은 클럭수를 요구하는데 본 논문에서는 읽기/쓰기 메모리를 이용하여 필요한 클럭수를 줄였다. 둘째로는 펑쳐링 부호화된 TCM 복호기에 펑처링 패턴에 정확한 동기를 얻지 못하면 프레임 동기 심볼인 UW(Unique sync-Word)를 획득하지 못하여 모든 데이터가 에러 처리되기 때문에 본 논문에서는 펑처링 패턴과 UW 심볼의 동기를 맞추는 알고리즘을 제시하였다. 이러한 알고리즘 분석 및 구현상의 문제점 해결을 토대로 본 논문에서는 ITU-T J38 annex B의 하향 스트림 채널 부호화 시스템을 VHDL 언어를 사용하여 FPGA 칩에 직접 구현하였다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.4 no.4
• /
• pp.286-294
• /
• 2011

Cable modems typically are implemented by a forward error correction(FEC) scheme. The ITU-T Recommendation J-38 Annex B specifies using 64- and 256- quadrature amplitude modulation (QAM) and extended RS coding scheme. In implementing the cable modem, there are some problems to fabricate and fitting on FPGA chip. First, many clocks are needed in implementing cable modem because of different code rate and different modulation types. To reduce the number of clocks, we use the two memories, which are different clock speed for reading and writing data. Second, this system lost the bit-synchronization and frame-synchronization in decoder, the system recognize that all data is error. This paper solves the problems by using simple 5-stage registers and unique sync-word. Based on solutions for about problems, the cable modem is fabricated on FPGA chip name as Vertex II pro xc2vp30-5 by Xilinx, and we confirmed the effectiveness of the results.