• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.7-10
• /
• 2007

The 1st order vertical network of Korea was adjusted in 1987 at first time. This is the second adjustment of the 1st order vertical network of Korea by National Geographic Information Institute. All the levelling data were acquired by digital level with invar staff. The number of 1st order level lines are 36, and 34 level lines comprise 11 circles of level network. Backward and forward error of a few level lines are larger than the regulations of NGII, Korea. Also, 3 circles of vertical network has circuit closure error that is exceed the regulation. As the result of 1st order vertical network adjustment, the reference standard error of the vertical network was $1.8mm/{\surd}km$.

• 한국연소학회:학술대회논문집
• /
• 2004.11a
• /
• pp.117-123
• /
• 2004

The burning characteristics of interacting coal particles in a convective flow are numerically investigated at various Reynolds numbers. The transient combustion of 2-dimensionally arranged particles, both the fixed particle distances of 5 radii to 20 radii horizontally and 3 radii to 24 radii vertically, is studied. The results obtained from the present numerical analysis reveal that the transient flame configuration and retardation of particle temperature augmentation with the horizontal or vertical particle spacing substantially influence devolatilization process and carbon conversion ratio of interacting particles. Volatile release and carbon conversion ratio of the second particle with decreasing horizontal and vertical particle spacing decrease gradually, whereas those of the first particle with decreasing vertical particle spacing increases due to flow acceleration. When the vertical particle spacing is smaller than $6R_{o}$, volatile release and carbon conversion ratio of the second particle decrease greatly due to reduction of flame penetration depth.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.159-166
• /
• 2005

The vibration on building structures due to exciting vibration forces has been studied only for the vibration level on existing buildings. Recently, several researches have been performed on the prediction of vertical vibration on structures by using an analytical method. However, these studies have been focused on mainly the vibration analysis through analytical modeling of structures. This study aims to investigate the characteristics of vertical vibration transfer in terms of the directions of transfer(upward transfer and downward transfer) on the shear wall building structures due to 2 type vibration forces. In order to examine the characteristics of vertical vibration transfer, the mode analysis and the impact experiment were conducted several times on one building structure. The results of this study suggest that the characteristics of vertical vibration transfer are different in terms of the directions of transfer.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.289-291
• /
• 1996

Linear induction motor(LIM) is widely used to drive magnetic levitation train. To drive LIM, different control method compared with conventional rotary type machine is needed. Since vertical force is generated inherently and it effects on the levitation system, vertical force should be kept constant for stable levitation. To keep vertical force constant, slip frequency should be kept constant. Once slip frequency is kept constant, tractive force can be controlled by adjusting motor currents. In this paper, control methods used so far arc analyzed with some experimental results and decoupling control algorithm is proposed to control tractive and vertical force separately. Control algorithm is verified through simulation.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.655-662
• /
• 2000

This study concerns with the variation of engineering characteristics of soft ground under embankment treated vertical drains. The derived engineering characteristics can be used in the prediction of increased strength of soft ground treated with vertical drains. The variations of physical properties such as liquid limit, natural water content, void ratio, and dry unit weight, and mechanical properties such as strength, preconsolidation ratio, compressibility are analysed and suggested. The co-relation of physical properties and mechanical properties with installation of vertical drains in soft ground are derived in this study.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.402-407
• /
• 2002

A commercial CFD code is applied to analyze the 3-D viscous flow field within vertical multi-stage centrifugal pimp including impeller with 6 blades and guide vane with 11 blades and is performed by changing flow rate from 10 to $26\;m^3/h$ at the constant 3500rpm. The purpose of this 3-D numerical simulation is to confirm how much the effect of blade inlet angle of guide vane has an influence on the performance of vertical multi-stage centrifugal pimp. these results performed by $20^{\circ},\;30^{\circ}$ inlet angle of guide vane are compared with grundfos performance data. The vertical multi-stage pump consist of the impeller, guide vane, and cylinder. The characteristics such as total pressure coefficient total heat shaft horse power, power efficiency, discharge coefficient are represented according to flow rate changing.

• Journal of the korean society of oceanography
• /
• v.32 no.1
• /
• pp.38-45
• /
• 1997

To find out the changes in vertical distribution patterns over the 24-h period, a key and the first step to tackle the problem of adaptive significance of diel vertical migration (DVM), vertically stratified time series samplings with multiple opening/closing plankton samplers were done in the East Sea of Korea (Sea of Japan). Sampling was done almost every 4 h for one day period following the same water parcel in Nov. 1995 and May 1996, respectively. Resultant patterns of vertical distribution showed that some species such as most abundant taxa Metridia pacifica and Scolecithyicella minor, both Copepoda, performed DVM even in the study area of strong thermal stratification. Their patterns of DVM such as distance scales and timing of movements were not the same each other, and they were separated from other taxa in the dendrogram obtained by the cluster analyses, Most minor taxa grouped in one, however, seemed not to do DVM in the study area of strong thermal stratification. They usually preferred the warmer surface layer where the foods were probably more abundant.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1660-1663
• /
• 2005

Unwanted vibrations are inevitably induced in other directions when pure unidirectional vibration motion is desired for the vertical scratching mechanism. Pure vertical vibration motion of the scratching machine can be obtained by driving identical two motors with symmetrically positioned eccentric unbalance masses. The desired optimal condition for driving pure vertical vibration for the scratching machine is assumed to be the resonance condition in that direction. Imposing the flexibility of the scratching machine in the horizontal direction, we can find out the amount of horizontal vibration component while maintaining the resonance in vertical direction. The desired stiffness in horizontal direction which produces the minimum vibration in horizontal direction are defined which can be used as a guide line to design the supporting structure of the scratching machine.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.8
• /
• pp.97-105
• /
• 2004

The vertical roller mill is the important machine grinding and mixing various crude materials in the manufacturing process of portland cement. Table liner is one of grinding elements of vertical roller mill and is subjected to the cyclic bending stress by rollers and the centrifugal force by rotation of table. It demands $4{\times}10^7$ expense of life but has $4{\times}10^6~-8{\times}10^6$ cycle. It fractures at the edge of grinding path of outside roller The repair expense fur it amounts to 30% of total maintenance of vertical roller mill. Therefore, this study shows the fracture mechanism of table liner of vertical roller mill using HDM and fatigue analysis

• Korean Journal of Remote Sensing
• /
• v.29 no.3
• /
• pp.325-329
• /
• 2013

This present study describes an application of UV scanning spectrometer $O_4$ data for retrieval of aerosol vertical profiles in Seoul during the measurement period that includes two Asian dust event days. The results show large variations of aerosol load in vertical and temporal scales. Large variations in aerosol were observed at 1 km in height during the daytime in the measurement period when the Asian dust events took place. The aerosol load, however, was found to be largest at the surface compared to those retrieved at the higher atmospheric layers. The results also clearly identified the diurnal patterns of aerosol vertical distributions. The aerosol load was high in the morning and noon whereas it was low in the afternoon. This study demonstrates that UV scanning spectrometer observations of the oxygen dimer can serve as a potential method for determination of atmospheric aerosol vertical distributions and optical properties.