• Journal of the Microelectronics and Packaging Society
• /
• v.11 no.2 s.31
• /
• pp.49-52
• /
• 2004

Ceramic components and modules using LTCC passives are being performed and on the passives included in modules have been studied nowadays. However the characteristics changes of passives in ceramic module due to the coupling between patterns, so each block in module, must be analyzed in the state of module including coupling factors. In our research, characteristics of each block of VCO, resonator part, oscillator part, output part were measured and analyzed to allow the prediction of behavior of VCO.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05c
• /
• pp.269-272
• /
• 2003

Nowadays, the study on the ceramic components and modules using LTCC is being performed and on the passives included in modules is being done also. But the characteristics of passives changes in ceramic module due to the coupling between patterns, so each block in module must be analyzed in the state of module including coupling factors. In our research each block of VCO, resonator part, oscillator part, output part is measured and analyzed and that allows the prediction of behavior of VCO.

• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.230-235
• /
• 2003

A small and integrated MMIC VCO(Voltage Controlled Oscillator) at Ka-band has been developed. This oscillator was designed as Clapp-Gouriet type scheme, fabricated, and implemented on the carrier. This was connected to an alumna substrate on the carrier providing output port for module, utilizing ribbon and wire bonding technique allowing the loss of 0.2dB. This VCO module showed the excellent performance.

• Journal of the Microelectronics and Packaging Society
• /
• v.1 no.2
• /
• pp.143-146
• /
• 1994

본 연구에서는 900MHz PLL Module을 설계제조하였다. 제안된 PLL Module은 900MHz VCO 및 PLL Controller로 구성되었다. PLL Module의 출력레벨은 -2dBm이었다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.2
• /
• pp.67-73
• /
• 2008

Reconfigurable radio technology is needed to reconstruct frequency and modem functionality, which can be different within various regions. In addition, it makes it possible for a single mobile handset to support various standards of wireless communication, and thus plays a key role inmobile convergence. A MMIC VCO(Monolithic Microwave Integrated Circuit Voltage Controlled Oscillator) has been developed to produce high power and wide bandwidth that adapts the Clapp-Gouriet type oscillator for series feedback. We were fabricated based on the 0.15um pHEMT from TRW. The MMIC VCO was connected to an alumina substrate on the carrier for testing. This MMIC VCO module shows good performance when compared with existing VCOs. Futhermore, it has potential as a reconfigurable MMIC VCO for ubiquitous communications such as LMDS (Local Multipoint Distribution Service), VSAT, Point to Point Radio and SATCOM.

• Journal of Electrical Engineering and Technology
• /
• v.5 no.1
• /
• pp.151-155
• /
• 2010

Reconfigurable radio technology is needed to reconstruct frequency and modem functionality, which can be different in various regions. In addition, it makes a single mobile handset capable of supporting various standards of wireless communication and thus plays a key role in mobile convergence. An MMIC VCO (voltage controlled oscillator) has been developed for high power and wide bandwidth where Clapp-Gouriet type oscillators are adapted for series feedback, and was fabricated based on 0.15um pHEMT of TRW. The MMIC VCO was connected to an aluminar substrate on the carrier for testing. This MMIC VCO module showed good performance in comparison to existing works. Furthermore, it can be potentially extended to reconfigure an MMIC VCO for wireless systems such as military applications and satellite communications.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.5
• /
• pp.821-828
• /
• 2005

This paper was proposed Intelligent and wireless USN/RFID module system that can overcome disadvantage of existing RFID system with no sensing module and wire communication. The proposed USN/RFID system was designed and fabricated. After fabricating new system, we analyzed the characteristics of USN/RFID module. After design VCO block that is point circuit to develop next generation system one chip of RFID system. we were carried out simulation and verified the validity, this paper was showed that VCO system was enough usable in wireless network module. USN/RFID Reader module shows superior result that validity awareness distance corresponds to 30M in the case of USN and to 5M in RFID Reader's case and 900MHz of commercial frequency does practical use enoughly in range of high frequency. The USN/RFID Reader module is considered to act big role to Ubiqitous industry offering computing surrounding of new concept that is intelligence type service and that was associated to real time location system(RTLS). environment improvement/supervision. national defense, traffic administration etc.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.3
• /
• pp.12-24
• /
• 2001

The key advantage of LTCC(low temperature co-fired ceramics) technology is the ability to integrate passive components such as resistors, capacitors, and inductors. More compact circuits with an increased scale of integration are needed with the development for advanced telecommunication system such as IMT-2000. LTCC technology can be obtained by removing these elements from the substrate surface to inside of ceramic body. And it can miniaturize the wireless phone through integration of planar patch antenna, duplexer, band pass filter, bias line, circuit of impedance matching and RF choke etc. Futhermore, with the multilayer chip process and its outstanding electrical material characteristics, LTCC is predestined for highly-integrated, cost effective wide band applications. This paper focuses on the general description of LTCC MCM technologies and the fabrication of the multilayer VCO module.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.5 s.43
• /
• pp.267-272
• /
• 2006

In this paper, an integrated and small Ka-band transceiver module has been developed for measuring distance at the radar systems. Oscillator of cavity type, The MMIC such as VCO, power amplifier, LNA, and mixer, and passive components are integrated on carriers and these are assembled in the transceiver module directly. The test result shows the output power of 21dBm and the noise figure of 5dB using developed transceiver module. Using developed FMCW transceiver module. We can measure the 60m range target by detecting the beat frequency and distinguish both earth and sky using radiometer signal. So we defined that the integrated module using MMIC had a good performance for the radar and radiometer at Ka-band.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.191-196
• /
• 2005

A low-cost, high-performance 40 Gb/s clock recovery module using a phase-locked loop(PLL) for a 40 Gb/s optical receiver has been designed and implemented. It consists of a clock recovery circuit, a RF mixer and frequency discriminator for phase/frequency detection, a DR-VCO, a phase shifter, and a hold circuit. The recovered 40 GHz clock is synchronized with a stable 10 GHz DR-VCO. The clock stability and jitter characteristics of the implemented PLL-based clock recovery module has shown to significantly improve the performance of the conventional open-loop type clock recovery module with DR filter. The measured peak-to-peak RMS jitter is about 230 fs. When input signal is dropped, the 40 GHz clock is generated continuously by hold circuit. The implemented clock recovery module can be used as a low-cost and high-performance receiver module for 40 Gb/s commercial optical network.