• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.33 no.2
• /
• pp.32-40
• /
• 2004

지구환경보호 관점에서 건물공기조화도 에너지 절감과 쾌적한 실내환경을 실현하는 것이 요구되고 있다. 본고에서는 BAS(빌딩오토메이션)로 실현하는 쾌적환경과 에너지 절감제어 응용에 관하여 소개하기로 한다. 쾌적한 에너지 절감제어 쾌적제어 (1) 협조제어 쾌적, 에너지절감, 운영경비절감 등 다양한 목적을 조화롭게 실현하는 제어이다. 예를 들면 쾌적하고 에너지절감제어에서는 여름철 냉방이나 겨울철 난방을 하는 경우에 있어서 무효한 에너지 사용을 억제하면서 실내환경을 유지하는 방법이다.(중략)

• Proceedings of the KIEE Conference
• /
• 1998.07b
• /
• pp.420-422
• /
• 1998

All Fault Detection and Diagnosis(FDD) methods utilize classification techniques. The objective of this study was to demonstrate the application of classification techniques to the problem of diagnosing faults in data generated by a variable-air-volume(VAV) air-handling unit(AHU) simulation model and to describe the characteristics of the techniques considered. Artificial neural network classifier and fuzzy clustering classifier were considered for fault diagnostics.

• KIEAE Journal
• /
• v.16 no.1
• /
• pp.57-65
• /
• 2016

Purpose: The purpose of this study is to analyze the energy performance by applying new technologies for passive and active control. Method: We selected new technologies for passive and active control which are based on formal study by analyzing technology applied to the High-Performance Buildings in various countries. Also, we analyzed energy saving potential for each technologies by breakdown the result of the energy saving rates in detail. Result: For the wall and roof insulating methods, preceding studies showed that up to 21% energy could be saved by improving roof insulation and applying proper outside insulation compared to non-insulation. For the windows and glazing system, preceding studies showed that Low-E glazing system could save up to 11% energy compared to single glazing system. Studies about solar and daylighting controls revealed that effective daylighting dimming control could save 13% of energy compared to uncontrolled situation. Studies on DOAS (Dedicated Outdoor Air System) showed that about 23% energy could be saved compared to standard VAV system. Studies on the active chilled beam showed that about 25% energy could be saved compared to standard VAV system and studies of applying UFAD (Under Floor Air Distribution) could consume 31% less energy than applying overhead system.

• Journal of Chest Surgery
• /
• v.48 no.4
• /
• pp.289-293
• /
• 2015

A 38-year-old male was admitted with symptoms of upper respiratory infection. Despite medical treatment, his symptoms of dyspnea and anxiety became aggravated, and bilateral lung infiltration was noted on radiological imaging studies. His hypoxemia failed to improve even after the application of endotracheal intubation with mechanical ventilator care, and we therefore decided to initiate venovenous extracorporeal membrane oxygenation (VV ECMO) for additional pulmonary support. On his twentieth day of hospitalization, hypotension and desaturation (arterial saturated oxygen <85%) developed, and right ventricular failure was confirmed by two-dimensional echocardiography. Therefore, we changed from VV ECMO to venoarteriovenous (VAV) ECMO, and the patient ultimately recovered. In this case, right ventricular dysfunction and volume overloading were induced by long-term VV ECMO therapy, and we successfully treated these conditions by changing to VAV ECMO.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.334-339
• /
• 2007

This paper is concerned with economic analysis and comparison between hybrid and central air conditioning system by TRNSYS simulation and Life Cycle Cost(LCC) analysis. Hybrid air conditioning system that is using VAV for interior zone and system air-conditioner for perimeter zone is installed in building A. Central air conditioning system is composed of VAV and convector. The simulation was carried out in mode temperature level control using TRNSYS 16. From the result of simulation and LCC analysis, hybrid air conditioning system was better than central air conditioning system in initial cost and energy consumption.

• BMB Reports
• /
• v.43 no.8
• /
• pp.524-529
• /
• 2010

Glucocorticoids (GCs) are useful drugs for the treatment of various diseases, but their use for prolonged periods can cause severe side effects such as osteoporosis. GCs have a direct effect on bone cells, where they can arrest bone formation, in part through the inhibition of osteoblast. On the other hand, GCs potently suppress osteoclast resorptive activity by disrupting its cytoskeleton based on the inhibition of RhoA, Rac and Vav3 in response to macrophage colony-stimulating factor. GCs also interfere with microtubule distribution and stability, which are critical for cytoskeletal organization in osteoclasts. Thus, GCs inhibit microtubule-dependent cytoskeletal organization in osteoclasts, which, in the context of bone remodeling, further dampens bone formation.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.2
• /
• pp.116-125
• /
• 2003

The new HVAC system to lower the conveyance energy and building height using IAV (Increasing Air Volume) technique is developed. IAV units which are equipped in each zone carry out air-conditioning and supply fresh air by induction of outdoor air in main duct. The design program which decides size of OAHU and IAV unit according to air conditioning load and fresh air demand of each zone is presented. The control system is developed to operate efficiently HVAC system and IAV unit, so that individual zone operation and well-deal with partial load and IAQ problem are possible. The new system is investigated in model building and makes more profit in conveyance energy, size of air conditioning facilities room and building height than VAV system. But in construction cost it is worse by about 15 per-centage.

• Solar Energy
• /
• v.15 no.3
• /
• pp.53-58
• /
• 1995

The objectives of this study are to introduce the energy simulation program BLDSYM, to verify the approach, and to demonstrate the energy saving opportunities. A case study model for Hoover Middle School, OK, USA has been introduced as a base case simulation. Air-side variable air volume(VAV) and water-side variable flow hydronic(VFH) system have been recommended, modeled and simulated to quantify the energy savings compared with the base system, which is typically constant air and water flow system. More than 30% of energy savings could be obtained with the optimum variable flow system.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.13 no.1
• /
• pp.31-43
• /
• 2005

The new HVAC system is developed to lower the conveyance energy and building height using IAV(Increasing Air Volume) technique. IAV units which are equipped in each zone carry out air-conditioning and supply fresh air by induction of outdoor air in main duct. The design program which decides size of OAHU and IAV unit according to air conditioning load and fresh air demand of each zone is presented. The control system is developed to operate efficiently HVAC system and IAV unit, so that individual zone operation and well-deal with partial load and IAQ problem are possible. The new system is investigated in model building and makes more profit in conveyance energy. size of air conditioning facilities room and building height than VAV system. But in construction cost it is worse by about 15 percentage.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.1 no.3
• /
• pp.210-218
• /
• 1989

The ASHRAE Simplified Energy Analysis Procedure using the Modified Bin Method(SEAP) is compared with the hourly calculation program, HASP/ACLD. The HASP/ACLD model office building with VAV system in Seoul is used as the basis for comparison. And the parameters considered are glass to wall area ratio and internal heat gains. The results show that SEAP predictions of annual energy use agree with HASP/ACLD predictions within 5% deviation. But there is a large difference in cooling and heating energy as glass to wall area ratio is varied. The SEAP cooling energy is 65-85% and the heating energy is 104-160% of the HASP/ACLD results. This is probably due to the solar heat gain data. the data related to the SEAP must be developed prior to use it.