• Journal of Environmental Science International
• /
• v.30 no.6
• /
• pp.501-505
• /
• 2021

V₂O₅-TiO₂ catalysts were prepared by various methods. V₂O₅-TiO₂ were prepared by sol-gel method with different drying conditions (aerogel and xerogel), and V₂O₅ supported on TiO₂ obtained by sol-gel method with precipitation-deposition method and impregnation method. The performance of the V₂O₅-TiO₂ catalysts was investigated for the selective oxidation of hydrogen sulfide in the stream containing both ammonia and excess water. All the catalysts showed good dispersion of vanadium and they had high H₂S conversion with no or little production of sulfur dioxide. The V₂O₅-TiO₂ aerogel catalyst prepared by sol-gel method with drying under super critical condition had the highest surface area which led to better catalytic activity compared to those by other synthesis methods.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.507-510
• /
• 2000

The purpose of this study is to research and developV$_2$O$_{5}$-SP270 composite electrode for supercapacitor. Property of an electrical double layer capacitor depend both on the technique used to prepare the electrode and on the current collector structure. The study is to research that V$_2$O$_{5}$-carbon composite electrode for supercapacitor with different voltage range. Suprcapacitor cell of V$_2$O$_{5}$-SP270 composite electrode with 25PVDFLiC1O$_4$PC$_{10}$ polymer electrolyte bring out good capacitor performance below 3V. The discharge capacitance of SP270 in 1st cycles was 13F/g at 0.1mA/cm$^2$, 3V. We performed cycle voltammogram, charge/discharge property.y.rty.y.

• Asian Journal of Turfgrass Science
• /
• v.22 no.1
• /
• pp.75-84
• /
• 2008

This study was carried out to examine the effects of cornstarch-based absorbent polymer (CAP) on the growth of cool season turfgrasses in sand-based soil mixture. Kentucky bluegrass + perennial ryegrass mixtures seeded at May 18 in 2006 on sand-based soil mixture. Sand + peat (5%, v/v), sand + CAP $20g{\cdot}m^{-2}$, sand + CAP $20g{\cdot}m^{-2}$ + peat (5%, v/v), and sand + CAP $40g{\cdot}m^{-2}$ + peat (5%, v/v) mixtures were compared. Ground coverage of sand + CAP $20g{\cdot}m^{-2}$ + peat (5%, v/v), and sand + CAP $40g{\cdot}m^{-2}$ + peat (5%, v/v) treatments showed 50% at a month after seeding. But the coverage of sand + peat (5%, v/v), sand + CAP $20g{\cdot}m^{-2}$ resulted in 36.7%. Mixing of CAP with sand was considered to be efficient method for increasing ground coverage as much as peat. Dry weight of turfgrass tiller at sand + CAP $20g{\cdot}m^{-2}$ + peat (5%, v/v), and sand + CAP $40g{\cdot}m^{-2}$ + peat (5%, v/v) were also significantly higher than sand + peat (5%, v/v), sand + CAP $20g{\cdot}m^{-2}$ mixtures at a month after seeding. Soil water retention at the sand + CAP $20g{\cdot}m^{-2}$, sand + CAP $40g{\cdot}m^{-2}$ + peat (5%, v/v) mixing were lower than sand + peat (5%, v/v) and sand + CAP $20g{\cdot}m^{-2}$ + peat (5%, v/v) during the dry periods. From the results, the mixing of CAP with sand is useful to increased ground coverage of kentucky bluegrass and perennial ryegrass.

• Journal of IKEEE
• /
• v.24 no.3
• /
• pp.859-866
• /
• 2020

This paper proposes a 2-ch DC-DC converter with a wide-input voltage range from 2.9V~5.6V for wearable AMOLED displays. For positive voltage V_POS, a boost converter is designed using an over-charged voltage permissible circuit (OPC) which generates a normal output voltage even if over-input voltage is applied, and a SPWM-PWM dual mode with 3-segmented power transistors to improve efficiency at light load. For negative voltage V_NEG, a 0.5x regulated inverting charge pump is designed to increase power efficiency. The proposed DC-DC converter was designed using a 0.18-㎛ BCDMOS process. Simulation results show that the proposed DC-DC converter generates V_POS voltages of 4.6 V and V_NEG voltage of -0.6V~-2.3V for input voltage of 2.9V to 5.6V. In addition, it has power efficiency of 49%~92%, output ripple voltage has less than 20 mV for load current range of 1 mA~70 mA.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.861-864
• /
• 2023

Recently, V2X (vehicle-to-everyting) communication has established itself as an essential technology for cooperative autonomous driving. V2X communication currently includes DSRC (dedicated short range communication) communication technology, which is a WLAN (wireless local area network) based communication technology, and C-V2X (cellular-V2X) communication technology, which is a Cellular-based communication technology. Since these two communication methods are not compatible with each other, various studies and experiments are being conducted to select one of the two communication methods. In the case of C-V2X communication, there are LTE-V2X (long term evolutionV2X) communication technology, which is an initial version, and 5G-V2X communication technology, which is a next-generation version. 5G-V2X communication technology has been completed only until standardization, so LTE-V2X communication technology is mainly used. In this paper, we introduce trends related to various issues in V2X communication, including communication method decisions.

• Journal of the Korean Ceramic Society
• /
• v.38 no.4
• /
• pp.308-313
• /
• 2001

We report the effects of the V$_2$O$_{5}$ additive on the sintering behavior and microwave dielectric properties of ZnNb$_2$O$_{6}$ ceramics. Densification temperatures of V$_2$O$_{5}$-doped ZnNb$_2$O$_{6}$ samples are lowered to the range of 875-9$25^{\circ}C$ because of the liquid phase sintering. Doped samples are composed of a Zn(Nb,V)$_2$O$_{6}$ solid solution and second phases. Up to 5 wt% V$_2$O$_{5}$ is the only second phase, however, V$_2$O$_{5}$ also exists as the second phase for 10 wt% V$_2$O$_{5}$ addition. In comparison with reported values of undoped ZnNb$_2$O$_{6}$ ceramics, microwave properties of V$_2$O$_{5}$-doped ZnNb$_2$O$_{6}$ samples are seriously degraded, which is confirmed to originate from the second phases. The optimum microwave properties (Q$\times$f=13,800, $\varepsilon$$_{r}$=23, $\tau$$_{f}$=-66ppm/$^{\circ}C$) are obtained from ZnNb$_2$O$_{6}$ with the addition of 5 wt% V$_2$O$_{5}$ sintered at 90$0^{\circ}C$.90$0^{\circ}C$.EX>.

• Electrical & Electronic Materials
• /
• v.9 no.7
• /
• pp.690-695
• /
• 1996

We have systematically investigated the characterization of V$_{2}$O$_{5}$ thin films as a counter electrode for lithium based complementary electrochromic devices. The V$_{2}$O$_{5}$ thin films were prepared by thermal vacuum evaporation with varing the substrate temperature and film thickness. In electrochromic devices for smart windows, the WO$_{3}$ thin films with 400-800 nm thickness require to be capable of reversibly injection 10-15 mC/cm$^{2}$ of lithium, which is readily accomplished charge-balanced switching in a V$_{2}$O$_{5}$ thin films with 100-150nm thick. The V$_{2}$O$_{5}$ thin films produces considerably small changes in optical modulation properties in the visible and near infrared region(500-1100 nm) compared to the amorphous WO$_{3}$ thin films on 10-15 mC/cm$^{2}$ of lithium injection and the V$_{2}$O$_{5}$ thin films can therefore act as a counter electrode to WO$_{3}$ in a lithium based complementary clectrochromic devices. After 10$^{5}$ coloration/bleaching switching time, the degradation does not occurs and the devices exhibit a stable optical modulation in V$_{2}$O$_{5}$ thin films. It has shown that the injected lithium ion amounts in crystalline V$_{2}$O$_{5}$ thin films with the same thickness is large by 3-5 mC/cm$^{2}$ of lithium compared to the amorphous thin films in the same driving conditions. Therefore, to optimize the device performance, it is necessary to choose an appropriate film thickness and crystallinity of V$_{2}$O$_{5}$ for amorphous WO$_{3}$ film thickness as a working electrode.

• Korean Chemical Engineering Research
• /
• v.49 no.2
• /
• pp.175-180
• /
• 2011

In this study, the $TiO_{2}/V_{2}O_{5}$ hybrid semiconductors were prepared by mixing $TiO_{2}$ and $V_{2}O_{5}$, and a subsequent smash process to reduce the recombination of electron and improve the efficiency of solar cells. Dye-sensitized solar cells were constructed using the resultant hybrid semiconductor, and their electrochemical properties were also investigated. The photocurrent-voltage curve obtained with the cells indicated a significant increase in the efficiency from 2.9 to 5.7% by the factor of 2 compared to the result obtained only with $TiO_{2}$. It is believed that the introduction of $V_{2}O_{5}$ effectively transport electrons in the $TiO_{2}$ conduction band to FTO glass and suppress recombination with the dye and/or the electrolyte, thus yielding an efficient performance of the dye sensitized solar cell. The impedance values also indicated a decrease of resistance in the interface of $TiO_{2}$/dye/electrolyte supporting the constructive contributions of the smashed $TiO_{2}/V_{2}O_{5}$ hybrid semiconductors for the efficiency.

• Molecules and Cells
• /
• v.43 no.11
• /
• pp.953-963
• /
• 2020

Coronavirus disease 2019 (COVID-19), caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), is an infectious disease with multiple severe symptoms, such as fever over 37.5℃, cough, dyspnea, and pneumonia. In our research, microRNAs (miRNAs) binding to the genome sequences of severe acute respiratory syndrome coronavirus (SARS-CoV), Middle East respiratory-related coronavirus (MERS-CoV), and SARS-CoV-2 were identified by bioinformatic tools. Five miRNAs (hsa-miR-15a-5p, hsa-miR-15b-5p, hsa-miR-195-5p, hsa-miR-16-5p, and hsa-miR-196a-1-3p) were found to commonly bind to SARS-CoV, MERS-CoV, and SARS-CoV-2. We also identified miRNAs that bind to receptor proteins, such as ACE2, ADAM17, and TMPRSS2, which are important for understanding the infection mechanism of SARS-CoV-2. The expression patterns of those miRNAs were examined in hamster lung samples infected by SARS-CoV-2. Five miRNAs (hsa-miR-15b-5p, hsa-miR-195-5p, hsa-miR-221-3p, hsa-miR-140-3p, and hsa-miR-422a) showed differential expression patterns in lung tissues before and after infection. Especially, hsa-miR-15b-5p and hsa-miR-195-5p showed a large difference in expression, indicating that they may potentially be diagnostic biomarkers for SARS-CoV-2 infection.

• Korean Journal of Crystallography
• /
• v.15 no.1
• /
• pp.35-39
• /
• 2004

Two new nickel vanadium borophosphate cluster compounds, $(NH_4)_{10}[Ni(H_2O)_5]_4[V_2P_2BO_{12}]_6{\cdot}nH_2O$ (1) and $(NH_4)_{3.5}(C_3H_{12}N_2)_{3.5}[Ni(H_2O)_6]_{1.25}{[Ni(H_2O)_5]_2[V_2P_2BO_{12}]_6{\cdot}nH_2O$ (2) have been synthesized and structurally characterized. Inter-diffusion methods were employed to prepare the compounds. The cluster anion $[(NH_4)\;{\supset}\;V_2P_2BO_{12}]_6$ is used as a building unit in the synthesis of new compounds containing $Ni(H_2O){^{2+}_5}$ in the presence of pyrazine and 1,3-diaminopropane. Compounds contain isolated cluster anions with general composition ${[Ni(H_2O)_5]_n[(NH_4)\;{\supset}\;V_2P_2BO_{12}]_6}^{-(17-2n)}$ (n = 2, 4). Crystal data: $(NH_4)_{10}[Ni(H_2O)_5]_4[V_2P_2BO_{12}]_6{\cdot}nH_2O$, monoclinic, space group C2/m (no. 12), a = 27.538(2) ${\AA}$, b = 20.366(2) ${\AA}$, c = 11.9614(9) ${\AA}$, ${\beta}$ = 112.131(1)$^{\circ}$, Z = 8; $(NH_4)_{3.5}(C_3H_{12}N_2)_b[Ni(H_2O)_6]_{3.5}{[Ni(H_2O)_5]_2[V_2P_2BO_{12}]_6{\cdot}nH_2O$, triclinic, space group P-1 (no. 2), a = 17.7668(9) ${\AA}$, b = 17.881(1) ${\AA}$, c = 20.668(1) ${\AA}$, ${\alpha}$ = 86.729(1)$^{\circ}$, ${\beta}$ \ 65.77(1)$^{\circ}$, ${\gamma}$ = 80.388(1)$^{\circ}$, Z = 2.