• 대한화학회지
• /
• 제56권4호
• /
• pp.459-463
• /
• 2012

8-Formyl-4-Methyl-7-Hydroxy Coumarin Derivatives were synthesized via Penchem condensation followed by Duffs reaction. Treatment of this with N,N-di substituted cyano acetamides in the presence of piperdine afforded New 8-Formyl-4-Methyl-7-Hydroxy Coumarin Derivatives (7a-o). Their structures were characterized by IR, $^1H$ and $^{13}C$ NMR and Mass spectral and elemental analysis data.

• Biomolecules & Therapeutics
• /
• 제2권1호
• /
• pp.28-33
• /
• 1994

In order to obtain insight into the repair mechanism of DNA containing thymine photo-dimer, the conformation of the duplex d(GCGGTTGGCG).d(CGCCAACCGC) with a thymine dimer incorporated has been studied by proton NMR. NOE data show that, although the local environment around the thymine dimer is altered, the gross structural changes are relatively small. T$_4$endonuclease V exhibited a conformational change on complex formation with DNA. This conformational change occurred around histidine 16 which was close to tyrosine 129 located in the aromatic segment (WYKYY) near the C-terminus. It is likely that the interaction between T$_4$endonuclease V and DNA is strong since the complex was not dissociated up to 1.6 M NaCl.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 추계학술대회논문집 - 한국공작기계학회
• /
• pp.361-366
• /
• 2000

The machinability of Ti-6Al-4V titanium alloy and tool wear behavior when machining Ti-6Al-4V titanium alloy was studied to understand the machining characteristics. this material is one of the strong candidate materials present and future aerospace or medical applications. Nowadays their usage has already been broaden to everyday's commercial applications such as golf club heads, finger rings and many decorative items. Anticipating the general use of this material and development of the titanium alloys in domestic facilities, the review and the study of the machining parameters for those alloys are deemed necessary. this study is concentrated to the machining parameters of the Ti-6Al-4V alloy due to their dominant position in the production of titanium alloys.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1089-1090
• /
• 2006

Biomimetic apatite deposition behaviors on Zr-1Nb and Ti-6Al-4V plate with various surface conditions were examined. Both alloys were polished with abrasive papers to have different roughness and some of them were treated in NaOH before exposition in simulated body fluid. NaOH treatment was found to enhance the deposition rate of apatite on Ti-6Al-4V significantly. On the other hand, the deposition rate of Zr-1Nb was not influenced by NaOH treatment. Without NaOH treatment, the polished Zr-1Nb with abrasive paper was found to induce more apatite nucleation than the polished Zr-6Al-4V.

• 한국공작기계학회논문집
• /
• 제10권6호
• /
• pp.29-35
• /
• 2001

The cutting characteristics of Ti-6Al-4V alloy and total wear when machining Ti-6Al-4V alloy was studied to understand the machining characteristics. This material is one of the strong candidate materials present and future aerospace or met ical applications. Nowadays their usage has already been broaden to commercial applications such as golf club head, finger rings and many decorative items. Anticipating the general use of this material and development of the titanium alloy in domestic facilities, the review and the study of the machining parameters far those alloys are deemed necessary. This study is concentrated to the machining parameters of the Ti-6Al-4V alloy due to their dominant position in the production of tita mum alloys.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2011년도 춘계학술대회 및 Fine pattern PCB 표면 처리 기술 워크샵
• /
• pp.187-187
• /
• 2011

지르코니아 ($ZrO_2$) 표면에 금속 (Au)으로 표면 코팅한 후 Ti-6Al-4V와 진공 브레이징 접합을 행하였다. 표면에 코팅한 Au 층의 영향을 비교 분석하기 위하여 Au를 코팅하지 않은 지르코니아도 모재로 사용하였다. 접합소재로는 Ag-Cu-Ti계 active filler를 사용하였다. $ZrO_2$/Ti-6Al-4V 브레이징 결과, active filler는 양측 모재 표면에 wetting 되었으며, Ti-6Al-4V 내부로 filler 확산으로 인하여 두 모재의 direct joint가 관찰되었다. 접합 계면 사이에 접합부 결함은 관찰되지 않았다.

• 소성∙가공
• /
• 제28권1호
• /
• pp.27-33
• /
• 2019

The effect of hardening methods and process parameters on surface hardening of a Ti-6Al-4V Alloy has been investigated in this study. To characterize the effectiveness of the respective surface hardening methods, samples of a Ti-6Al-4V alloy were self-quenched, laser-nitrided, laser-carburized, laser-carbonitrided at the same laser irradiation conditions. This experimental procedure was followed by comparing the microstructural evolutions and mechanical properties of the respective samples after the laser surface hardenings. The hardening characteristics of the respective laser surface hardenings were well defined in this study, and the hardness was significantly influenced by the reaction compounds and laser energy density.

• 한국작물학회지
• /
• 제28권1호
• /
• pp.128-132
• /
• 1983

Pressure chamber(DIC-PC-40형) technique에 의한 대두재배품종 Williams와 금강대립의 경엽에 대한 수분특성의 결과는 다음과 같다. 1. 최대포수시의 삼투압$(\Pi_p)$은 Williams 9.0bar, 금강대립은 10.4bar였다. 3. 초기원형질분리점에서의 상대함수율$(PWC^*)4은 금강대립이 86.0%, Williams가 92.6%였다. 4. 삼투수의 총량에 대한 원형질분리점에서의 침출량비$(V_p/V_o)$는 Williams가 94.0%, 금강대립이 83.4%였다. 5. 최대함수량에 대한 삼투수의 총량의 비$(V_p/w_5)$는 금강대립이 84.3%, Williams가 77.5%였다. 7. 탄성계수는 금강대립이 $1.6\times10^5bar$ 이었으며 Williams는 $8.5$\times$10^2$bar로 현저한 차이를 보였다.

• 한국축산시설환경학회지
• /
• 제16권3호
• /
• pp.193-204
• /
• 2010

본 연구는 국내 여건에 적합한 돈사시설과 분뇨처리가 일체형으로 조합된 고상식 돈사에 적합한 환기시스템을 찾고자 수행하였다. 덕트입기${\rightarrow}$ 측벽배기 (처리 V1), 처마입기 (측벽천장)${\rightarrow}$측벽배기 (처리 V2), 천장입기${\rightarrow}$측벽배기 (처리 V3) 3종류의 환기시스템을 설치하였다. 시험 시기는 겨울철과, 여름철부터 가을철에 실시하였다. 환기시스템별 고상식 돈사내 온도, 공기유속, 암모니아, 황화수소, 돼지성장 등을 조사하였다. 그 결과는 다음과 같다. 겨울철 동안 온도는 덕트입기에서 온도가 약간 높은 경향을 보였으며, 외기온도에 영향을 받지 않았다. 여름철부터 가을철 동안 최고온도는 $33.4{\sim}33.8^{\circ}C$ 처리간에 큰 차이를 보이지 않았으며,외기온도에 영향을 받는 것으로 나타났다. 가을철 일일 연속적 온도 변화에서 처마입기가 다른 환기시스템보다 낮은 온도를 유지와 온도의 편차가 큰 것으로 나타났다. 겨울철 동안 돈사내 공기유속은 덕트입기와 처마입기는 0.02~.21 m/s 로 비슷한 경향이었으며 천장입기는 0.04~.15 m/s 이었다. 여름철부터 가을철동안 돈사내 공기유속은 덕트입기 0.10~.41 m/sec 처마입기 0.10~83m/sec 천장입기 0.11~.26 m/sec의 공기유속을 보였다. 가을철 일일 연속적 공기유속변화에서 처마입기가 공기유속의 변화가 다른 환기시스템보다 큰 것으로 나타났다. 겨울철 동안 돈사내 $NH_3$ 발생 최고 농도는 덕트입기 7.0 ppm, 마입기 3.5 ppm,천장 입기 8.7 ppm 검출 되었으며,$H_2S$는 검출되지 않았다. 여름철부터 가을철 동안 돈사내 $NH_3$ 발생 최고농도는 덕트입기 6.1 ppm, 처마입기 2.8 ppm, 천장입기 5.6 ppm 검출되었다. 돼지 성장에서 환기시스템 간 통계적인 유의성은 없었으나, 겨울철 동안 일당증체량은 덕트입기와 천장입기가 처마입기보다 약 4% 높은 증체를 보였으며, 사료섭취량/증체량은 덕트입기에서 사육되는 돼지가 효율이 약 4% 높은 것으로 나타났다. 여름철부터 가을철 동안 덕트입기와 천장입기에서 사육되는 돼지의 일당증체량이 처마입기에서보다 약 3% 정도 높은 경향을 보였으며, 사료섭취량/증체량은 덕트입기에서 사육되는 돼지가 효율이 약 2% 높은 것으로 나타났다. 이상의 결과를 종합하여 볼 때 고상식 돈사용 환기시스템으로 처마입기 (측벽천장) 측벽배기 적용은 비효율적이라 판단된다.

• 한국조경학회지
• /
• 제30권1호
• /
• pp.87-95
• /
• 2002

This study was carried out to investigate the load of soil layers affected by soil depth in artificial soil alone or in blends with Loam with various ratio. The artificial soils were perlite large grain, perlite small grain, and perlite small grains blended with Loam (sand 46%, silt 40%, clay 14%) at a ratio of 8:2, 6:4, 5:5 (v/v). The soil layers were divided into a planting layer and a well-drained layer, then the weight of each layer in the air-dried state and in the field capacity were determined. The data were subjected to correlation analysis, regression analysis, and paired samples t-test. The summarized results are as follows; 1) In the air-dried state, the regression equations of the well-drained layer weight(kg/m2) in perlite large grain, planting layer weight in perlite small grain, planting layer weight in perlite small grain biended with loam(8:2, v/v), perlite small grain blended with loam(6:4, v/v), and perlite small grain blended with loam(5:5, v/v) were; 1.65824*X+0.026, 1.52292*X-0.052, 3.21468*X+0.515, 6.17549*X+ 0.083, and 6.02100*X + 33.133, respectively, where X is soil depth measured in Centimeters. 2) In the field capacity, the regression equations of the well-drained layer weight(kg/m2) in perlite large grain, planting layer weight in perlite small grain, planting layer weight in perlite small grain blended with loam(8:2, v/v), perlite small grain blended with loam(6:4, v/v), and perlite small grain blended with loam(5:5, v/v) were 5.055*X - 2.006, 7.073*X + 100.008, 8.092*X + 116.676, 10.766*X + 100.112, and 10.974*X + 124.423, respectively, where X is the soil depth measured in Centimeters. 3) All of the equations mentioned above were statistically reliable and therefore easily applicable in practical business affairs.