• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.467-468
• /
• 2006

We report on the fabrication of P3HT-based thin-film transistors (TFT) that consist of indium-zinc-oxide (IZO), PVP (poly-vinyl phenol), and Ni for the source-drain (S/D) electrode, gate dielectric, and gate electrode, respectively. The IZO S/D electrodes of which the work function is well matched to that of P3HT were deposited on a P3HT channel by thermal evaporation of IZO and showed a moderately low but still effective transmittance of ~25% in the visible range along with a good sheet resistance of ${\sim}60{\Omega}/{\square}$. The maximum saturation current of our P3HT-based TFT was about $15{\mu}A$ at a gate bias of -40V showing a high field effect mobility of $0.05cm^2/Vs$ in the dark, and the on/off current ratio of our TFT was about $5{\times}10^5$. It is concluded that jointly adopting IZO for the S/D electrode and PVP for gate dielectric realizes a high-quality P3HT-based TFT.

• 한국재료학회지
• /
• 제22권10호
• /
• pp.504-507
• /
• 2012

Synthesis of RGO (reduced graphene oxide)-CdS composite material was performed through CBD (chemical bath deposition) method in which graphene oxide served as the support and Cadmium Sulfate Hydrate as the starting material. Graphene-based semiconductor photocatalysts have attracted extensive attention due to their usefulness for environmental and energy applications. The band gap (2.4 eV) of CdS corresponds well with the spectrum of sunlight because the crystalline phase, size, morphology, specic surface area and defects, etc., of CdS can affect its photocatalytic activity. The specific surface structure (morphology) of the photocatalyst can be effective for the suppression of recombination between photogenerated electrons and holes. Graphene (GN) has unique properties such as a high value of Young's modulus, large theoretical specific surface area, excellent thermal conductivity, high mobility of charge carriers, and good optical transmittance. These excellent properties make GN an ideal building block in nanocomposites. It can act as an excellent electron-acceptor/transport material. Therefore, the morphology, structural characterization and crystal structure were observed using various analytical tools, such as X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. From this analysis, it is shown that CdS particles were well dispersed uniformly in the RGO sheet. Furthermore, the photocatalytic property of the resulting RGO-CdS composite is also discussed in relation to environmental applications such as the photocatalytic degradation of pollutants. It was found that the prepared RGO-CdS nanocomposites exhibited enhanced photocatalytic activity as compared with that of CdS nanoparticles. Therefore, better efficiency of photodegradation was found for water purification applications using RGO-CdS composite.

• 대한미생물학회지
• /
• 제22권3호
• /
• pp.197-208
• /
• 1987

Chlamydia trachomatis has now shown that this interesting intracellular parasite is a cause of nongonococcal urethritis, infantile pneumonia, pelvic inflammatory disease and epididymitis, in addition to lymphogranuloma venerum and inclusion conjunctivitis. There are several diagnostic methods for C. trachomatis, but the method using monoclonal antibody is the most sensitive and specific. The hybride cell were prepared by fusion of myeloma cell($P_3X_{63}\;Ag_8{\cdot}V_{653}$) of mouse and lymphocyte of mouse(BALB/c) that were immunized with formalin killed C. trachomatis serotype D. The cell mixtures after fusion were dispensed into 640 wells of the 96 well culture plates and continuously cultured in HAT medium for 2 weeks. The supernatants of culture media in 83(13%) wells were reacted with C. trachomatis, which were determined by enzyme-linked immunosorbent assay in 96 well microplate. The clones that secreted antibody to C. trachomatis were cloned by limiting dilution. Only six monoclones secreted antibody to C. trachomatis. The antibody titer of ascitic fluid that collected from same BALB/c mice bearing hybridoma cells was above 1:100,000. These monoclonal antibodies that were IgG reacted with elementary and reticulate bodies of all serotypes(Ba, D, E, F, G, H, J and LGV type-I) using ELISA and indirect immunofluorescence stain, but there were no cross reaction with other bacteria(coagulase negative Staphylococcus, Proteus and E. coli). We concluded these six monoclones secreted the same monoclonal antibody to C. trachomatis. The sensitivity and specificity of the monoclonal antibody compared with Microtrak(confirmatory test of C. trachomatis, Syva) was 100%, respectively.

• Nuclear Engineering and Technology
• /
• 제51권5호
• /
• pp.1444-1450
• /
• 2019

The fast-neutron shielding behaviour (FNSB) of two clay-materials (Ball clay and Kaolin)of Southwestern Nigeria ($7.49^{\circ}N$, $4.55^{\circ}E$) have been investigated using effective removal cross section, ${\Sigma}_R(cm^{-1})$, mass removal cross section, ${\Sigma}_{R/{\rho}}(cm^2g^{-1})$ and Mean free path, ${\lambda}$ (cm). These parameters decide neutron shielding behaviour of any material. A computer program - WinNC-Toolkit has been used for computation of these parameters. The toolkit evaluates these parameters by using elemental compositions and densities of samples. The proficiency of WinNC-Toolkit code was probe by using MCNPX and GEANT4 to model fast neutron transmission of the samples under narrow beam geometry, intending to represent the actual experimental setup. Direct calculation of effective removal cross section ($cm^{-1}$) of the samples was also carried out. The results from each of the methods for each types of the studied clay-materials (Ball clay and Kaolin) shows similar trend. The trend might be the fingerprint of water content retained in each of the samples being baked at different temperature. The compositions of each sample have been obtained by Particle-Induced X-ray Emission (PIXE) technique (Tandem Pelletron Accelerator: 1.7 MV, Model 5SDH). The FNSB of the selected clay-materials have been compared with standard concrete. The cognizance of various factors such as availability, thermo-chemical stability and water retaining ability by the clay-samples can be analyzed for efficacy of the material for their FNSB.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2019년도 춘계학술대회
• /
• pp.238-241
• /
• 2019

본 논문에서는 차량에서 측정되는 모든 센서 데이터를 클라우드에 저장하고, 저장된 데이터를 분류 모델을 이용해 분석한 다음, 분석이 완료된 데이터를 실시간으로 운전자의 디스플레이에 제공하는 "클라우드와 데이터 마이닝을 이용한 차량 분석 시스템"을 설계한다. 제안하는 정보 분석을 위한 클라우드 서버는 차량에서 측정하는 센서 데이터를 클라우드 서버의 테이블에 저장하고 전달받은 데이터를 분석 모듈로 전달하는 센서 데이터 통신 모듈과 분류를 위해 전달받은 데이터를 학습 알고리즘을 이용해 분류한 분류 모델을 이용서 목적에 맞게 분석, 분류하고 운전자에게 실시간으로 정보를 제공하는 센서 데이터 분류 모듈로 구성된다. 제안된 정보 분석을 위한 클라우드 서버는 차량에서 수집되는 수많은 센서 데이터를 클라우드 서버에 저장하기 때문에 차량에 데이터가 과부하 되지 않고 데이터 분류를 위한 연산을 차량이 아닌 클라우드 서버에서 진행하기 때문에 데이터를 빠르고 효율적으로 관리할 수 있다. 또한, 운전자가 원하는 정보들을 디스플레이에 시각화하여 사람들의 자율주행차량에 대한 안정성을 증가시킬 수 있다.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2019년도 추계학술대회
• /
• pp.19-19
• /
• 2019

유전체 전장 연관분석 (GWAS)은 단일염기다형성(SNP)의 유전자형과 표현형 간의 통계적인 연관성을 분석함으로써 품종 선발용 SNP Marker 개발에 응용되고 있다. 본 연구에서는 Tano Red와 Ruby seedless 교배실생 278 계통을 대상으로 여러 과실 특성에 따른 관련 SNP를 동정함으로써 육종 선발에 필요한 DNA marker 개발에 필요한 기초 유전 자료를 얻고자 하였다. 한 계통 당 5~10개의 포도알을 선택하여 과립중, 과육탄성, 과피탄성, 과육경도, 과피경도, 과립당 종자갯수, 과립당 종자무게 및 인장강도를 측정하였다. 각 개체는 Genotyping by sequencing (GBS) 방법으로 Sequencing하여 Reference genome (Vitis vinifera PN40024 12X v2.)과 mapping 하였다. MAF (Minor allele frequency) >5%, Missing Data <30% 의 조건을 가진 SNPs 만 1차 선발하여 TASSEL과 GAPIT 프로그램으로 GWAS 분석을 하였다. Manhattan plot 결과 과립중 형질에서는 33개, 과립당 종자무게 25개와 인장강도에서는 20개의 통계학적으로 유의한 SNPs 가 선발되었고, 특이적으로 이들 모두 18번 염색체에서 발견되었다. 그러나 나머지 형질에서는 유의한 차이를 보이는 SNPs를 선발하지 못하였다. 과실의 인장강도는 수확 후 저장성과 유통과정에 영향을 미치기 때문에 Marker 개발을 통한 품종선별이 중요하다. 향후 이러한 특성과 본 연구를 통해 동정된 SNPs 의 상관관계를 구체적으로 연구하여 Marker 개발에 활용하고자 한다.

• 대한금속재료학회지
• /
• 제47권1호
• /
• pp.44-49
• /
• 2009

본 연구에서는 2인치 ITO의 타깃으로 ITO박막을 성장시킨 후 RTA 처리로 인한 전기적, 광학적 특성의 변화를 조사하였으며, RTA 처리된 ITO 박막을 이용하여 플라즈마 응용 사인보드를 제작 및 구동하였다. RTA공정으로 열처리한 ITO는 투과도는 증가하며, 비저항은 감소함을 관찰하였으며, 투과도의 증가는 RTA로 인한 결정성의 증가로 인한 결과이고, 비저항의 감소는 결정성의 증가와 더불어 치환형 주석의 원자수가 증가하였다고 사료된다. ITO를 이용하여 사인보드 제작시 방전cell의 압력은 3-5 Torr가 적당함을 알 수 있었으며, 전극 간격을 조절하여 120 V 정도의 낮은 플라즈마 개시 전압을 갖는 플라즈마 응용 사인보드를 성공적으로 제작 할 수 있었다.

• Genomics & Informatics
• /
• 제20권3호
• /
• pp.30.1-30.9
• /
• 2022

Hereditary spastic paraplegia is a not common inherited neurological disorder with heterogeneous clinical expressions. ALDH18A1 (located on 10q24.1) gene-related spastic paraplegias (SPG9A and SPG9B) are rare metabolic disorders caused by dominant and recessive mutations that have been found recently. Autosomal recessive hereditary spastic paraplegia is a common and clinical type of familial spastic paraplegia linked to the SPG11 locus (locates on 15q21.1). There are different symptoms of spastic paraplegia, such as muscle atrophy, moderate mental retardation, short stature, balance problem, and lower limb weakness. Our first proband involves a 45 years old man and our second proband involves a 20 years old woman both are affected by spastic paraplegia disease. Genomic DNA was extracted from the peripheral blood of the patients, their parents, and their siblings using a filter-based methodology and quantified and used for molecular analysis and sequencing. Sequencing libraries were generated using Agilent SureSelect Human All ExonV7 kit, and the qualified libraries are fed into NovaSeq 6000 Illumina sequencers. Sanger sequencing was performed by an ABI prism 3730 sequencer. Here, for the first time, we report two cases, the first one which contains likely pathogenic NM_002860: c.475C>T: p.R159X mutation of the ALDH18A1 and the second one has likely pathogenic NM_001160227.2: c.5454dupA: p.Glu1819Argfs Ter11 mutation of the SPG11 gene and also was identified by the whole-exome sequencing and confirmed by Sanger sequencing. Our aim with this study was to confirm that these two novel variants are direct causes of spastic paraplegia.

• 한국ITS학회 논문지
• /
• 제21권4호
• /
• pp.145-156
• /
• 2022

본 연구는 자율주행차 보안 강화를 목적으로 자율주행차 특징, 보안 위협, 국내외 컴플라이언스 등 자율주행차 보안 관련 현황 분석을 통해 보안 수준 점검 항목을 도출하였고 이를 토대로 AHP 모형에 적용하여 상대적 중요도를 확인하였다. 실증 분석 결과 사이버보안 관리체계 수립·이행, 암호화, 위험평가 등의 순으로 중요도 우선 순위가 나타났다. 본 연구의 의의는 자율주행차관련 보안 수준 점검 항목을 도출하고 연구 모형을 실증함으로써 인명 피해까지 초래할 수 있는 사이버 보안 사고 감소 및 관련 기업들의 자율주행차 보안 관리 수준을 향상시킬 수 있다. 그리고 자율주행차 점검 항목의 상대적 중요도를 고려하여 점검을 수행한다면 보안 수준을 조기에 식별할 수 있을 것이다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.163-163
• /
• 2000

In this research, we used the ion irradiation technique which has an advantae in improving intentionally the properties of surface and interface in a non-equilibrium, instead of the conventional annealing method which has been known to improve the material properties in the equilibrium stat. Cu/Co multilayered films were prepared on SiN4/SiO2/Si substrates by the electron-beam evaporation for the Co layers and the thermal evaporation for the Cu layers in a high vacuum. The ion irradiation with a 80keV Ar+ was carried out at various ion doses in a high vacuum. Hysteresis loops of the films were investigated by magneto-optical polar Kerr spectroscopy at various experimental conditions. The change of atomic structure of the films before and after the ion irradiation was studied by glancing angle x-ray diffraction, and the intermixing between Co and Cu sublayers was confirmed by Rutherford backscattering spectroscopy. The surface roughness and magneto-resistance were measured by atomic force microscopy and with a four-point probe system, respectively. During the magneto-resistance measurement, we changed temperature and the direction of magnetization. From the results of experiments, we found that the change at the interfaces of the Cu/Co multilayered film induced by ion irradiation cause the change of magnetic properties. According to the change in hysteresis loop, the surface inplane component of magnetic easy axis was isotropic before the ion irradiation, but became anisotropic upon irradiation. It was confirmed that this change influences the axial behavior of magneto-resistance. Especially, the magneto-resistance varied in accordance with an external magnetic field and the direction of current, which means that magneto-resistance also shows the uniaxial behavior.