• 제목/요약/키워드: V2X

검색결과 3,760건 처리시간 0.032초

Design and Construction of Detector Module for UFFO Burst Alert & Trigger Telescope

  • 정애라;;;;;;;최지녕;최연주;;;;;;정수민;김지은;김민빈;김석환;김예원;;이직;임희진;;;;민경욱;나고운;남지우;;박일흥;;;;;서정은
    • 천문학회보
    • /
    • 제37권2호
    • /
    • pp.207.1-207.1
    • /
    • 2012
  • One of the key aspects of the upcoming Ultra-Fast Observatory (UFFO) Pathfinder for Gamma-Ray Bursts(GRBs) identification will be the UFFO Burst Alert & Trigger Telescope(UBAT), based on a novel space telescope technique. The UBAT consists of coded mask, hopper, and detector module(DM). The UBAT DM consists of YSO crystal arrays, multi-anode photo mulipliers, and readout electronics. We will present the design and construction of the UBAT DM, and the response of the UBAT DM to X-ray sources.

  • PDF

족소양담경(足少陽膽經)에서 투사(投射)되는 신경원(神經元)의 표지부위(標識部位)에 대한 연구(硏究) (Localization of the Neurons Projecting to the Gallbladder Meridian)

  • 육상원;이광규;이상룡;김점영;이창현;이봉희
    • Korean Journal of Acupuncture
    • /
    • 제17권1호
    • /
    • pp.101-121
    • /
    • 2000
  • The purpose of this morphological studies was to investigate the relation to the meridian, acupoint and nerve. The common locations of the spinal cord and brain projecting to the the gallbladder, GB34 and common peroneal nerve were observed following injection of transsynaptic neurotropic virus, pseudorabies virus(PRV), into the gallbladder, GB34 and common peroneal nerve of the rabbit. After survival times of 96 hours following injection of PRV, the thirty rabbits were perfused, and their spinal cord and brain were frozen sectioned($30{\mu}m$). These sections were stained by PRV immunohistochemical staining method, and observed with light microscope. The results were as follows: 1. In spinal cord, PRV labeled neurons projecting to the gallbladder, GB34 and common peroneal nerve were founded in thoracic, lumbar and sacral spinal segments. Densely labeled areas of each spinal cord segment were founded in lamina V, VII, X, intermediolateral nucleus and dorsal nucleus. 2. In medulla oblongata, The PRV labeled neurons projecting to the gallbladder, GB34 and common peroneal nerve were founded in the A1 noradrenalin cells/C1 adrenalin cells/caudoventrolateral reticular nucleus, rostroventrolateral reticular nucleus, medullary reticular nucleus, dorsal motor nucleus of vagus nerve, nucleus tractus solitarius, raphe obscurus nucleus, raphe pallidus nucleus, raphe magnus nucleus, gigantocellular nucleus, lateral paragigantocellular nucleus, principal sensory trigeminal nucleus and spinal trigeminal nucleus. 3. In Pons, PRV labeled neurons were parabrachial nucleus, Kolliker-Fuse nucleus and cochlear nucleus. 4. In midbrain, PRV labeled neurons were founded in central gray matter and substantia nigra. 5. In diencephalon, PRV labeled neurons were founded in lateral hypothalamic nucleus, suprachiasmatic nucleus and paraventricular hypothalamic nucleus. 6. In cerebral cortex, PRV labeled neuron were founded in hind limb area.This results suggest that PRV labeled common areas of the spinal cord projecting to the gallbladder, GB34 and common peroneal nerve may be first-order neurons related to the somatic sensory, viscero-somatic sensory and symapathetic preganglionic neurons, and PRV labeled common area of the brain may be first, second and third-order neurons response to the movement of smooth muscle in gallbladder and blood vessels.These PRV labeled neurons may be central autonomic center related to the integration and modulation of reflex control linked to the sensory system monitoring the internal environment, including both visceral sensation and various chemical and physical qualities of the bloodstream. The present morphological results provide that gallbladder meridian and acupoint may be related to the central autonomic pathways.

  • PDF

차량 네트워크에서 고속 영상처리 기반 스마트 카메라 기술 (Smart Camera Technology to Support High Speed Video Processing in Vehicular Network)

  • 손상현;김태욱;전용수;백윤주
    • 한국통신학회논문지
    • /
    • 제40권1호
    • /
    • pp.152-164
    • /
    • 2015
  • 최근 반도체 기술, 센서 기술 및 이동통신 기술의 발전으로 스마트 자동차 기술 연구 개발이 진행 중에 있다. 사회가 발전함에 따라 차량이 증가하였고 사고에 대한 위험은 점차 높아지고 있다. 그에 따라 기존의 차량용 블랙박스 외에 차량의 각종 센서 정보를 활용하여 운전자에게 다양한 정보를 제공하는 첨단 운전자 보조 시스템이 연구되고 있다. 본 논문에서는 차량 간의 통신기능을 포함하고, 주변의 정보를 습득하여 제공할 수 있는 스마트 카메라 장치를 설계 및 구현하여, 장치에 포함된 카메라로부터 입력 받은 영상을 분석하여 획득한 정보를 영상 메타데이터화 하는 기술에 대한 연구를 수행하였다. 또한 임베디드 장치의 제한된 계산 성능을 보완하기 위해 관심영역을 설정하는 S-ROI(Static-Region Of Interest), D-ROI(Dynamic-Region Of Interest) 방식을 고안하였다. 실험을 통해 영상처리 속도가 전체영상 분석에 비해 S-ROI의 경우 3.0배, D-ROI의 경우 4.8배 향상함을 확인하였다.

수소처리와 후성장층의 특성이 다이아몬드 박막의 전계방출 특성에 미치는 영향

  • 심재엽;송기문;이세종;백홍구
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2000년도 제18회 학술발표회 논문개요집
    • /
    • pp.96-96
    • /
    • 2000
  • 화학증착법으로 증착된 다이아몬드 박막은 우수한 전기적 특성과 뛰어난 화학적, 열적 안정성 때문에 전계방출소재로 많은 관심을 불러 일으키고 있다. 다이아몬드 박막의 전계방출은 저전계에서 일어나는 것으로 알려져 있으며, 저전계방출의 원인을 규명하려는 많은 연구가 진행되어 왔다. 한편, 다이아몬드 박막의 전계방출전류는 금속기판의 사용에 의한 기판/다이아몬드 접촉의 개선, 다이아몬드 박막내의 흑연성분의 조절에 의한 구조변화, 보론이나 인 (P), 질소의 도핑, 수소 플라즈마나 cesium 등의 금속을 이용한 표면처리 등의 여러 방법에 의하여 향상된다는 것이 입증되었다. 그 외에 메탄과 대기 분위기 처리, 암모니아 분위기에서의 레이저 조사도 전계방출특성을 향상시키는 것으로 보고되었다. 그러나, 다이아몬드 박막의 성장후 구조적 특성이 다른 박막의 후성장이나 열분해된 운자수소 처리가 다이아몬드 박막의 전계방출특성에 미치는 영향에 관한 연구는 지금까지 이루어지지 않았다. 본 연구에서는 수소처리와 후성장이 다이아몬드 박막의 전계방출특성에 미치는 영향을 고찰하고 이로부터 그 원인을 규명하고자 하였다. 다이아몬드 박막은 hot-filament 화학증착법을 이용하여 증착하였다. 후성장한 다잉아몬드 박막내의 흑연성분과 박막의 두께를 체계적으로 조절하여 후성장 박막의 구조적 특성과 그 두께의 영향을 확인할 수 있었다. 후성장층내의 흑연성분과 두께가 증가할수록 전계방출특성은 향상되다가 저하되었다. 한편, 다이아몬드 박막을 성장시킨 후 수소분위기 처리를 함에 따라 전계방출특성은 향상되었지만 수소처리시간이 5분 이상으로 증가함에 따라 그 특성은 저하되었다. 본 연구에서는 수소처리와 후성장시 나타나는 전계방출특성의 변화 원인을 규명하고자 한다.기판위에서 polymer-like Carbon 구조는 향상되는 경향을 보였다.0 mm인 백금 망을 마스크로 사용하여 실제 3차원 미세구조를 제작하여 보았다. 그림 1에서 제작된 구조물의 SEM 사진을 보여주었으며, 식각된 면의 조도가 매우 뛰어나며 모서리의 직각성도 우수함을 확인할 수 있다. 이와 같이 도출된 시험 조건을 기초로 하여 리소그래피 후에 전기 도금을 이용한 금속 몰드 제작 및 이온빔 리소그래피 장점을 최대한 살릴수 있는 미세구조 제작에 대한 연구를 계속 추진할 계획이다. 비정질 Si1-xCx 박막을 증착하여 특성을 분석한 결과 성장된 박막의 성장률은 Carbonfid의 증가에 따라 다른 성장특성을 보였고, Silcne(SiH4) 가스량의 감소와 함께 박막의 성장률이 둔화됨을 볼 수 있다. 또한 Silane 가스량이 적어지는 영역에서는 가스량의 감소에 의해 성장속도가 둔화됨을 볼 수 있다. 또한 Silane 가스량이 적어지는 영역에서는 가스량의 감소에 의해 성장속도가 줄어들어 성장률이 Silane가스량에 의해 지배됨을 볼 수 있다. UV-VIS spectrophotometer에 의한 비정질 SiC 박막의 투과도와 파장과의 관계에 있어 유리를 기판으로 사용했으므로 유리의투과도를 감안했으며, 유리에 대한 상대적인 비율 관계로 투과도를 나타냈었다. 또한 비저질 SiC 박막의 흡수계수는 Ellipsometry에 의해 측정된 Δ과 Ψ값을 이용하여 시뮬레이션한 결과로 비정질 SiC 박막의 두께를 이용하여 구하였다. 또한 Tauc Plot을 통해 박막의 optical band gap을 2.6~3.7eV로 조절할 수 있었다. 20$0^{\circ}C$이상으로 증가시켜도 광투과율은 큰 변화를 나타내지 않았다.부터

  • PDF

고에너지 밀링분말과 급속소결을 이용한 Ti-Nb-Zr-HA 생체복합재의 기계적 성질 및 생체적합성 (Mechanical Properties and Bio-Compatibility of Ti-Nb-Zr-HA Biomaterial Fabricated by Rapid Sintering Using HEMM Powders)

  • 박상훈;우기도;김상혁;이승민;김지영;고혜림;김상미
    • 한국재료학회지
    • /
    • 제21권7호
    • /
    • pp.384-390
    • /
    • 2011
  • Ti-6Al-4V ELI (Extra Low Interstitial) alloy has been widely used as an alternative to bone due to its excellent biocompatibility. However, it still has many problems, including a high elastic modulus and toxicity. Therefore, nontoxic biomaterials with a low elastic modulus should be developed. However, the fabrication of a uniform coating is challenging. Moreover, the coating layer on Ti and Ti alloy substrates can be peeled off after implantation. To overcome these problems, it is necessary to produce bulk Ti and Ti alloy with hydroxyapatite (HA) composites. In this study, Ti, Nb, and Zr powders, which are biocompatible elements, were milled in a mixing machine (24h) and by planetary mechanical ball milling (1h, 4h, and 6h), respectively. Ti-35%Nb-7%Zr and Ti-35%Nb-7%Zr-10%HA composites were fabricated by spark plasma sintering (SPS) at $1000^{\circ}C$ under 70MPa using mixed and milled powders. The effects of HA addition and milling time on the biocompatibility and physical and mechanical properties of the Ti-35%Nb-7%Zr-(10%HA) alloys have been investigated. $Ti_2O$, CaO, $CaTiO_3$, and $Ti_xP_y$ phases were formed by chemical reaction during sintering. Vickers hardness of the sintered composites increases with increased milling time and by the addition of HA. The biocompatibilty of the HA added Ti-Nb-Zr alloys was improved, but the sintering ability was decreased.

Simulation study on effects of loading rate on uniaxial compression failure of composite rock-coal layer

  • Chen, Shao J.;Yin, Da W.;Jiang, N.;Wang, F.;Guo, Wei J.
    • Geomechanics and Engineering
    • /
    • 제17권4호
    • /
    • pp.333-342
    • /
    • 2019
  • Geological dynamic hazards during coal mining can be caused by the failure of a composite system consisting of roof rock and coal layers, subject to different loading rates due to different advancing velocities in the working face. In this paper, the uniaxial compression test simulations on the composite rock-coal layers were performed using $PFC^{2D}$ software and especially the effects of loading rate on the stress-strain behavior, strength characteristics and crack nucleation, propagation and coalescence in a composite layer were analyzed. In addition, considering the composite layer, the mechanisms for the advanced bore decompression in coal to prevent the geological dynamic hazards at a rapid advancing velocity of working face were explored. The uniaxial compressive strength and peak strain are found to increase with the increase of loading rate. After post-peak point, the stress-strain curve shows a steep stepped drop at a low loading rate, while the stress-strain curve exhibits a slowly progressive decrease at a high loading rate. The cracking mainly occurs within coal, and no apparent cracking is observed for rock. While at a high loading rate, the rock near the bedding plane is damaged by rapid crack propagation in coal. The cracking pattern is not a single shear zone, but exhibits as two simultaneously propagating shear zones in a "X" shape. Following this, the coal breaks into many pieces and the fragment size and number increase with loading rate. Whereas a low loading rate promotes the development of tensile crack, the failure pattern shows a V-shaped hybrid shear and tensile failure. The shear failure becomes dominant with an increasing loading rate. Meanwhile, with the increase of loading rate, the width of the main shear failure zone increases. Moreover, the advanced bore decompression changes the physical property and energy accumulation conditions of the composite layer, which increases the strain energy dissipation, and the occurrence possibility of geological dynamic hazards is reduced at a rapid advancing velocity of working face.

C-ITS 기반 PVD를 활용한 차량 내 경고정보의 운전자 주행행태 영향 분석 (A Study to Evaluate the Impact of In-Vehicle Warning Information on Driving Behavior Using C-ITS Based PVD)

  • 김탁영;김호선;강경표;김승범
    • 한국ITS학회 논문지
    • /
    • 제21권5호
    • /
    • pp.28-41
    • /
    • 2022
  • C-ITS(Cooperative-Intelligent Transportation System)는 차량과 차량 또는 차량과 인프라 간의 양방향 무선통신 기술을 기반으로 전방의 교통상황 정보를 제공하는 기술 및 시스템을 의미한다. C-ITS 환경에서는 Vehicle-to-Everything(V2X) 기반의 경고 정보를 제공함으로써 운전자로 하여금 감속을 유도하고, 급격한 감속과 가속을 지양하도록 하여 주행행태를 안정적으로 개선시킬 수 있을 것으로 추측된다. 본 연구는 서울시 C-ITS 기반의 경고 정보의 개별적인 효과를 검증하기 위해 경고정보에 대한 순응여부를 판단할 수 있는 방법론을 개발하였으며 추가로 주행안전성 변화를 분석하여 경고정보의 효과를 정량적으로 평가해 보고자 한다. 순응여부는 정보 제공 유무로 구별되는 사전 PVD (Probe Vehicle Data)와 사후 PVD의 속도 분포를 추출하여 비교하였으며, 주행안전성 평가는 Jerk와 가속소음을 계산하여 분석을 수행하였다. 정량적 분석을 위해서 서울 C-ITS 사업기간동안 수집되었던 PVD와 부족한 데이터 수집을 보완하고자 DTG (Digital Tacho Graph) 데이터를 추가 수집하여 활용하였다. 순응도 분석결과 충분한 유효샘플이 수집된 경고정보에 대해 운전자는 감속운행행태를 보였으며, Jerk와 가속소음과 같은 주행안전성 지표를 산출하여 분석한 결과 경고정보 제공으로 인해 주행안전성이 개선되었음을 알 수 있었다.

세포주기 변화에 타른 방사선 유도 암세포 사망의 조절기전 (Regulatory Mechanism of Radiation-induced Cancer Cell Death by the Change of Cell Cycle)

  • 정수진;정민호;장지연;조월순;남병혁;정민자;임영진;장병곤;윤선민;이헝식;허원주;양광모
    • Radiation Oncology Journal
    • /
    • 제21권4호
    • /
    • pp.306-314
    • /
    • 2003
  • 목적: K562 세포의 방사선에 의한 세포 사망은 mitotic catastrophe 현상이 위주로 나타나지만 herbimycin A (HMA)에 의하여 apoptosis 반응이 촉진되는 반면 genisteln에 의하여 두 가지 형태의 세포사망이 모두 억제된다. 본 연구에서는 HMA와 genistein에 의한 K562세포의 방사선 유도 세포주기 조절 변화와 세포 사망 양상의 연관성을 조사하였다. 대상 및 방법: 지수증식기의 KS62 세포에 6 MV 선형가속기(Clinac 1,m C, Varian)를 이용하여 200~300 cGy/min의 선량률로 10 Gy를 균일하게 조사하였다. HMA와 genistein은 각각 250 nM와 25$\mu$M농도로 방사선 조사 후 즉시 투여하였다. 실험에서는 세포주기, 오절인자의 발현 및 활성, 노화 및 분화정도 등에 있어서의 시간에 따른 변화를 조사하였다. 결과: 방사선 단독조사에서 KS62세포는 G2기의 정체를 보였으나 정상적인 053을 가지는 세포와는 달리 지속적인 세포주기의 정체를 보이지 않았다. G2정체가 유지되는 동안 cyclin Bl의 점진적인 증가를 관찰할 수 있었으며, 이는 염색체의 복제가 완료되지 않은 상태에서 M기로 진행하여 미성숙한 염색체 응축과 mitotic catastrophe 현상이 나타나는 것과 일치한다. 방사선 조사와 함께 HMA를 투여한 경우에는 G2정체가 빠르게 해소되었으며 동시에 Gl기에서 세포가 정체되는 양상을 보였다. 세포주기 조절인자 cdc2 kinase 활성 증가와 cyclln I와 A 발현 및 CDK2 활성의 감소 등의 현상으로 설명되며, 이는 apoptosis의 증가와 연관성을 갖는다. 반면 genistein의 경우에는 cyclin Bl과 떨cfsc 발현 및 cdc2활성이 모두 감소하는 등 G2정체를 계속 유지하였다. 이와 함께 방사선에 의한 노화와 megakaryocyte로의 분화도 지속되는 것을 관찰할 수 있었다. 결론: HMA와 genistein에 의한 KS62세포의 방사선 유도 세포사망의 변화는 세포주기 조절과 밀접하게 연관되어 있음을 확인하였다. 이는 다양한 방사선 유도 세포사망의 기전을 이해하는 데 독창적인 모델을 제공하며, 방사선을 이용한 암 치료법의 개발에 새로운 표적을 제공할 수 있을 것이다.

Scaritoxin과 Ciguatoxin의 크로마토그라피상에서의 몇가지 유사성 (Similarities of Scaritoxin to Ciguatoxin on the Chromatographic Behaviours)

  • 조용계;피제이쇼이여
    • 한국식품과학회지
    • /
    • 제17권2호
    • /
    • pp.121-127
    • /
    • 1985
  • Ciguatoxin 구조 연구의 일환으로 파랑비늘돔 중에 서 독성분을 추출하였는데 Scarus sordidus만 근육과 내장에 독이 있었으나, S.frenatus, S.scaber and S.pectorlis에는 모두 독이 없었다. 실리스산컬럼에서 얻은 조독을 DEAE-셀루로즈 컬럼상에서 콜로로포름, 클로로포름-메타놀 (1 : 1) 및 메타놀로 전개하였더니 클로로포름 유출액(ST-1) 과 클로로포름-메타놀(1 : 1) 유출액에서 독성분이 발견되었고, 메타놀 유출액에서는 독성분이 검출되지 않았다. ST-1과 ST-2을 silica gel 60F-254에 spot하여 클로로포름-메타놀-물-식초산 (90 : 9.5 : 0.2 : 0.3)으로 전개하였더니, 그Rf값이 각각 0.60-0.75, 0.30-0.54였다. DEAE-셀루로즈 컬럼에서 얻은 ST-1을 재재크로마토그라피 하여도 역시 ST-1과 ST-2로 나누어졌다. 이렇게 얻은 ST-1과 ST-2는 세파텍스 LH-20에 흡착시켜, 클로로포름-메타놀(1 : 1) 용매로 전개할 때, 머무름시간이 모두 같았고, 역상 LiChrosorb RP-18를 이용한 HPLC상에서도 머무름시간이 동일하였다. 또 순수한 $ST-1\;(1.10\;{\mu}g)$ 그리고 이것을 1 N NaOH로 처리한 것 $(1.13\;{\mu}g)$을 활성도V인 알루미나 컬럼에 흡착시켜 클로로포름-메타놀 혼합액으로 전개하였더니 알카리처리를 하지 않는 경우는 $0.35\;{\mu}g)$가 클로로포름-메타놀의 9 : 1, 1 : 1 유출액에서, $(0.55\;{\mu}g)$가 메타놀-물 (1 : 1) 유출액에서 검출되었으나, 알카리처리를 한 경우는 처음 독성의 50%가 소실되어, 클로로포름-메타놀 (9 : 1) 유출액에서 $(0.21\;{\mu}g)$, 메타놀-물 (1 : 1) 유출액에서 $(0.80\;{\mu}g)$ 검출되었다. 하면 morey eel내장에서 얻은 독물질도 DEAE-셀루로즈에서 ST-1 과 ST-2로 나누어지며, 이 ST-1의 TLC, HPLC 및 알루미나 컬럼상의 거동이 파랑비늘돔에서 얻은 ST-1의 그것과 같으므로 scaritoxin으로 보고한 ST-1은 ciguatoxin의 형태인 less polar cigutoxin (LPCTX) 으로 생각된다.

  • PDF

타이타늄 임플랜트 시편 내부에 설치한 자석의 자성강도에 따른 골형성 변화 (THE CHANGE OF BONE FORMATION ACCORDING TO MAGNETIC INTENSITY OF MAGNET PLACID INTO TITANIUM IMPLANT SPECIMENS)

  • 황윤태;이성복;최대균;최부병
    • 대한치과보철학회지
    • /
    • 제43권2호
    • /
    • pp.232-247
    • /
    • 2005
  • Purpose. The purposes of this investigation were to discover the possibility of clinical application in the areas of dental implants and bone grafts by investigating the bone formation histologically around specimen which was depending on the intensity of magnetic field of neodymium magnet inside of the specimens. Material and method. 1. Measurement of magnetic intensity - placed the magnet inside of the specimen, and measured the intensity of magnetic field around the 1st thread and 3rd thread of specimen 20 times by using a Gaussmeter(Kanetec Co., Japan). 2. Surgical Procedure - Male rabbit was anesthetised by constant amount of Ketamine (0.25ml/kg) and Rompun (0.25ml/kg). After incising the flat part of tibia, and planted the specimens of titanium implant, control group was stitched without magnet, while experimental groups were placed a magnedisc 500(Aichi Steel Co., Japan) or magnedisc 800(Aichi Steel Co., Japan) into it, fixed by pattern resin and stitched. 3. Management after the surgery - In order to prevent it from the infection of bacteria and for antiinflammation, Gentamycin and Ketopro were injected during 1 week from operation day, and dressed with potadine. 4. Preparation of histomorphometric analysis - At 2, 4 and 8 weeks after the surgery, the animals were sacrificed by excessed Ketamine, and then, specimens were obtained including the operated part and some parts of tibia, and fixed it to 10% of PBS buffer solution. After embedding specimens in Technovit 1200 and B.P solution, made a H-E stain. Samples width was 75$\mu$m . In histological findings through the optical microscope and using Kappa image base program(Olympus Co. Japan), the bone contact ratio and bone area ratio of each parts of specimens were measured and analyzed. 5. Statistical analysis - Statistical analysis was accomplished with Mann Whitney U-test. Results and conclusion. 1. In histomorphometric findings, increased new bone formation was shown in both control & experimental groups through the experiment performed for 2, 4 & 8 weeks. After 4 weeks, more osteoblasts and osteoclasts with significant bone remodeling were shown in experimental groups. 2. In histomorphometric analysis, the bone contact ratios were 38.5% for experimental group 1, 29.5% for experimental group 2 and 11.9% for control group. Experimental groups were higher than control group(p<0.05) (Fig. 6, Table IV). The bone area ratios were 60.9% for experimental group 2, 46.4% for experimental group 1 and 36.0% for control group. There was no significantly statistical difference between experimental groups and control group(p<0.05) (Fig. 8, Table VII) 3. In comparision of the bone contact ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group at the 1st thread (p<0.05) and experimental group 1 (1.8mT) was higher than control group at the 3rd thread(p<0.05) (Fig. 7, Table V, VI). 4. In comparision of the bone area ratios at each measurement sites according to magnetic intensity, experimental group 2(5.6mT) was higher than control group and experimental group 1 (4.0mT) at the 1st thread(p<0.1) and experimental group 2(4.4mT) was higher than experimental group 1 (1.8mT) at the 3rd thread(p<0.1) (Fig. 9, Table IX, X). Experiment group 2 was largest, followed by experiment group l and control group at the 3rd thread of implant. There was a significant difference at the 1st thread of control group & experiment group 2, and at 1st thread & 3rd thread of experiment group 1 & 2, and not at control group experiment group 1.(p<0.1)