• Korean Journal of Agricultural Science
• /
• v.11 no.1
• /
• pp.160-175
• /
• 1984

This study was carried out to analyze the effects of the revolution and forwarding speed of the rotary blade and the edge curves which were $30^{\circ}$ and $40^{\circ}$, on the power requirement of rotary tillage. In this study, the revolutions of the rotary blade considered were 204, 243, 285, 360 rpm, and the forwarding speeds of the rotary system considered were 29.40cm/sec, 46.93em/sec. The power requirements of rotary blade were measured by a dynamic strain gage systems at the soil bin which was filled with artificial soil. The results of the study were summarized as follows: 1. The response surface analysis showed that the revolution and forwarding speed of the rotary shaft had an interacting influence on the torque requirement of the rotary blade. The mathematical model developed by the above was repersented as follow. $$T=a_0+a_1V+a_2R +a_3VR+a_4VR^2$$ where, $a_0=constant$ $a_1,\;a_2,\;a_3,\;a_4=coefficients$ V=forwarding speed of the rotary system. (em/sec) R=revolution of the rotary shaft. (rpm) T=tilling torque requirement. (kg-m) 2. When the maximum tilling torque requirement was analyzed, ${\partial}T/{\partial}R$ was decreased with the increasing revolution of rotary shaft, while ${\partial}T/{\partial}V$ was increased, which was minimum at 200~220 rpm. When the forwarding speeds were increased, ${\partial}T/{\partial}R$ was decreased with increasing rate. 3. When the mean tilling torque requirement was analyzed, ${\partial}T/{\partial}V$ was constant at 320~360 rpm and ${\partial}T/{\partial}R$ was decreased with increasing rate along with the increasing revolution of rotary shaft. 4. When the mean tilling torgue requirement per unit volume of soil was analyzed, ${\partial}T/{\partial}V$ was minimum at 270~300 rpm. ${\partial}T/{\partial}R$ for the forwarding speeds of 29.40cm/sec and 46.93cm/sec was same as that for 280~290 rpm. 5. Increasing the edge curves of the rotary blades, the tilling torque requirement was increased. But other studies showed that the smaller the edge curve, the more straw could be wrapped on blades which resulted in increasing torque requirements. Therefore, the edge curve of rotary blade should be considered for the future study.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.19 no.2
• /
• pp.125-129
• /
• 1983

It is customary to assume that the resistance of a jull at uniform speed may be regarded as the sum of viscous and wavemaking component resistance, or C sub(i)=C sub(v)+C sub(w), where C sub(v) is regarded as a function of Reynolds Number R and C sub(w) a function of Froude Number F. Formulae have been obtained for ∂C sub(w)/∂R, ∂C sub(v)/∂F which may be relevant in seeking theoretical grounds for possible interaction between viscous and wavemaking component resistances. The values of ∂C sub(w)/∂R are small. In general they are smaller than corresponding values of ∂C sub(v)/∂R. But although these values are small it does not follow that they are entirely negligible. The Froude assumption that the rate of change of C sub(w) with R is zero must bel regarded as incorrect.

• Microbiology and Biotechnology Letters
• /
• v.29 no.2
• /
• pp.78-83
• /
• 2001

Phytase (myo-inositol hexakisphosphate phosphohydrolase: EC 3.1.3.8) hydrolyzes phytic acid (myo-inositol hexakisphosphate) to myo-inositol and monophosphates. In order to obtain phytase producing bacteria, many samples were collected from various soils. Among thirty-five phytase-producing strains, YH100 showed the highest phytase activity. In order to identify the selected YHlOO strain, the morphological and physiological characteristics were examined according to the method of Bergey's manual by 168 rRNA sequence, cellular fatty acids profile, O+C contents and physiological test using API 20E kit. The strain YH100 identified to be a genus of Enterobacter cloacae and was named as Enterobacter cloacae YHlOO. Optimum medium for the phytase production by the Entemhacter c!o([we YHlOO was composed of 2.0%(w/v) glucose, 1.0%(w/v) peptone, 1.0%(w/v) beef extract, 0.1 %(w/v) KCI. and 0.1 %( w/v) sodium phytate.

• Membrane Journal
• /
• v.23 no.1
• /
• pp.61-69
• /
• 2013

The effect of humic acid (HA), and the roles of microfiltration (MF), PES (polyethersulfone) beads adsorption, and photo-oxidation were investigated in hybrid process of ceramic MF and PES beads loaded with titanium dioxide ($TiO_2$) photocatalyst for advanced drinking water treatment. Those were compared and studied in viewpoints of membrane fouling resistance ($R_f$), permeate flux (J), and total permeate volume ($V_T$). Because membrane fouling increased dramatically as decreasing HA, $R_f$ increased and J decreased, and finally $V_T$ was the highest at 2 mg/L HA. In the experiment to investigate the roles of photo-oxidation and adsorption at humic acid 4 mg/L and 6 mg/L. In both conditions, $R_f$ was the lowest and $V_T$ was the highest in MF + $TiO_2$ + UV process. The average treatment efficiencies of turbidity and dissolved organic matters were the highest in MF + $TiO_2$ + UV process, too.

• Journal of Applied and Pure Mathematics
• /
• v.6 no.3_4
• /
• pp.155-165
• /
• 2024

Let R be a semi-prime ring. Let [δ₁, D₁] and [δ₂, D₂] be two generalized symmetric reverse biderivations of R with associated reverse biderivations D₁ and D₂. The main aim of the present paper is to establish conditions of orthogonality for symmetric reverse biderivations and symmetric generalized reverse biderivations in R.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.3
• /
• pp.161-169
• /
• 2005

With various Korean domestic soybeans, growth and yields analysis were conducted to select the suitable soybean cultivars for cultivation in paddy field. Distinctive aspects of the soybean growth were observed in paddy field such as retarded growth of top plants and roots, relatively higher T/R ratio followed by overgrowth of top plant. However, growth and yields were significantly different among the cultivars showing 134kg/10a in Paldokong and 385 kg/10a in Doremikong. At V5. and R2 stage, highly positive correlations $(r=0.76^{**}\~0.91^{**})$ were observed between leaf area and dry weight of top plant and/or root. T/R ratio was negatively correlated with dry weight of root $(r=-0.37^*)$ at V5 stage, while significantly correlated with leaf area $(r=-0.37^{**})$ and dry weight of top plant $(r=0.65^{**})$at R2 stage. Among the characters, only 100-seed weight was significantly correlated with yield. Considering the growth characters, 37 cultivars could be included in 3 different groups and genotypic properties such as maturity and growth habit were similar in each group. Nine cultivars in group 1 showed retarded growth from V5 to R2 stage, relatively lower T/R ratio, and good seed ripening. Average yields of the cultivers was 257kg/10a. In group 2, 12 cultivars showed higher T/R ratio due to overgrowth of top plant and lowest average yields (230 kg/l0a) due to poor seed ripening. Sixteen cultivars in group 3 grew fast from V5 to R2 stage representing late maturity traits, low T/R ratio, and good seed ripening. Average yields of the cultivars was highest among groups showing 270kg/l0a. In results, stable self-sufficiency of soybean yields could be expected by selective cultivation with high yielding cultivars ranging from 301 to 385kg/10a, such as Shinpaldalkong 2, Sohokong, Doremikong, Keumkangkong, Bukangkong, Dajangkong, and Geomjeongkong 2, or with cultivars included in group 3.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.45-52
• /
• 2023

Cold-junction correction(CJC) and disconnection detection circuit design of various thermocouples(TC) and multi-channel TC interface circuit using them were designed. The CJC and disconnection detection circuit consists of a CJC semiconductor device, an instrumentation amplifier(IA), two resistors and a diode for disconnection detection. Based on the basic circuit, a multi-channel interface circuit was also implemented. The CJC was implemented using compensation semiconductor and IA, and disconnection detection was detected by using two resistor and a diode so that IA input voltage became -0.42V. As a result of the experiment using R-type TC, the error of the designed circuit was reduced from 0.14mV to 3㎶ after CJC in the temperature range of 0℃ to 1400℃. In addition, it was confirmed that the output voltage of IA was saturated from 88mV to -14.2V when TC was disconnected from normal. The output voltage of the designed circuit was 0V to 10V in the temperature range of 0℃ to 1400℃. The results of the 4-channel interface experiment using R-type TC were almost identical to the CJC and disconnection detection results for each channel. The implemented multi-channel interface has a feature that can be applied equally to E, J, K, T, R, and S-type TCs by changing the terminals of CJC semiconductor devices and adjusting the IA gain.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.1 s.47
• /
• pp.9-16
• /
• 2006

The design practice of the lateral resisting system has been traditionally dependent on the experience and know-how of a structural engineer. And the method to reflect the evaluation results of building's capacity on design process doesn't exist. The proposal of a rational design of the lateral load resisting system is based on the available full capacity $(R_{ac})$ of a building and the minimum required capacity $(R_{code})$ suggested in the code. This study suggests thai nonlinear static analysis, which is the estimation of the lateral capacity with the pushover analysis, be included in the existing design procedure of the structure. After finishing the basic structural design, the lateral resisting capacity ol a building is estimated. At the phase of nonlinear static analysis, pushover analysis is peformed to define the fully yielded baseshear $(V_Y)$. When the design wind baseshear $(V_{wind})$ is bigger than the design seismic baseshear $(V_D)$, the value is checked to determine whether or not it is smaller than the $V_Y$. After confirming that it is smaller, the $R_{ac}$ of the structure is computed. If the $V_D$ is bigger at first, only the $R_{ac}$ is computed. When the value of the estimation shows remarkable differences with the $R_{code}$, repetition of the design modification is needed for those approximate to the $R_{code}$. Application of the proposed design procedure to 2-D steel braced RC buildings has proven to be efficient.

• Bulletin of the Korean Mathematical Society
• /
• v.49 no.4
• /
• pp.715-736
• /
• 2012

Brown provided a structure theorem for a class of perfect ideals of grade 3 with type ${\lambda}$ > 0. We introduced a skew-symmetrizable matrix to describe a structure theorem for complete intersections of grade 4 in a Noetherian local ring. We construct a class of perfect ideals I of grade 3 with type 2 defined by a certain skew-symmetrizable matrix. We present the Hilbert function of the standard $k$-algebras R/I, where R is the polynomial ring $R=k[v_0,v_1,{\ldots},v_m]$ over a field $k$ with indeterminates $v_i$ and deg $v_i=1$.

• Korean Journal of Crystallography
• /
• v.12 no.2
• /
• pp.88-91
• /
• 2001

The complex [NiL₃]Cl₂·3H₂O (1) (L=trans-1,2-diaminocyclohexane) has been synthesized and characterized by X-ray crystallography. The compound 1 crystallizes in the cubic space group P2₁3, with a=13.830(1) Å, V=2645.9(2) ų, Z=4, R₁(wR₂) for 1500 observed reflections of [I> 2σ(I)] was 0.0766 (0.2068).