• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.10
• /
• pp.646-650
• /
• 2017

We have evaluated the ferroelectric and electrical properties of pure $BiFeO_3$ (BFO) and $Bi_{0.9}A_{0.1}Fe_{0.975}V_{0.025}O_{3+{\alpha}}$ (A=Nd, Tb) thin films on $Pt(111)/Ti/SiO_2/Si(100)$ substrates by using a chemical solution deposition method. The remnant polarization ($2P_r$) of the $Bi_{0.9}Tb_{0.1}Fe_{0.975}V_{0.025}O_{3+{\alpha}}$ (BTFVO) thin film was approximately $65{\mu}C/cm^2$, with a maximum applied electric field of 950 kV/cm and a frequency of 10 kHz, where as that of the $Bi_{0.9}Nd_{0.1}Fe_{0.975}V_{0.025}O_{3+{\alpha}}$ (BNFVO) thin film was approximately $37{\mu}C/cm^2$ with a maximum applied electric field of 910 kV/cm. The leakage current density of the co-doped BNFVO thin film was four orders of magnitude lower than that of the pure BFO thin film, at $2.75{\times}10^{-7}A/cm^2$ with an applied electric field of 100 kV/cm. The grain size and uniformity of the co-doped BNFVO and BTFVO thin films were improved, in comparison to the pure BFO thin film, through structural modificationsdue to the co-doping with Nd and Tb.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.883-886
• /
• 1996

Instead of point-to-point hard wiring between substation yard equipments and SCADA RTU(Remote Terminal Unit), fibre optic cable will be used in the portion between Local Units and Central Unit in the future KEPCO 765kV substation. The connections between substation yard equipments and nearby Local Unit remain the same hard wiring. The new fibre optic system will provide security especially during ground faults and is immune to electrical noise. A prototype system will be manufactured and installed in the existing 154kV Yeosan Substation by the end of July this year and operated for one year. By incorporating the operation experiences acquired in the system, an improved system will be commercially applied to 765kV Shin-An-Seong Substation where 345kV GIS will be installed initially and act as the switching station in the year 1998. The system is composed of one Central Unit and several Local Units. The Central Unit is composed of two workstation level computers, one is in operation and the other backup, and a Communication Control Unit. The Local Unit uses the existing SCADA RTU technology and takes the form of a distributed one. Between the Communication Control Unit and Local Units, the fibre optic system with star-coupler is used.

• Journal of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.259-266
• /
• 1974

Isotopic experiments using $H_2O^{18}$ on the oxidation of V(III) in acid perchlorate by molecular oxygen were performed in the range pH 1.0 to 3.0. At pH < 2, where a rate equation of the form TEX>$ -\frac{d[V(III)]}{dt}=k_1\frac{[O_2][V(III)]}{[H^+]}$ is adequate, the tracer study clearly indicated that all the product vanadyl ion's ($VO^{2+}$) oxygen originated from the molecular oxygen. At pH > ~2, where a different rate expression of the form $-\frac{d[V(III)]}{dt}=K_2\frac{[O_2][V(III)]^2}{[Ht]^2}$is required, the isotopic experiment showed that half the vanadyl oxygen originated from the molecular oxygen. Considering the results of the isotopic study, a mechanism for the V(Ⅲ)-O2 reaction at pH < ~2, may be suggested as follows: The tracer results at pH > ~2 imply that the rate determining step may be $$ V_2(OH)_2^{4+} + O_2 \rightarrow 2VO^{2+} + H_2O_2$$ followed by $$V_2(OH)_2^{4+} + H_2O_2 \rightarrow 2VO^{2+} + 2H_2O$$ after establishing the equilibria V^{3+} + H_2O \leftrightarrow VOH^{2+} + H^+, and 2VOH^{2+}\leftrightarrow V_2(OH)_2^{4+}$$

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.257-260
• /
• 2004

HRTF 를 사용하여 가상적인 음향 효과를 내는 시스템에서의 음의 왜곡은 필수적이다. 하지만 음성과 같은 사람이 민감하게 느끼는 부분에서의 음의 선명도 저하는 다른 대역의 왜곡보다 더욱 크게 느껴진다. 그리고 모노 및 두 채널의 주파수 특성이 비슷한 스테레오에서는 음질을 보상할 수 없다는 단점이 있다. 본 논문에서는 이러한 음의 선명도의 저하를 유발하게 하는 가상 음향 발생 필터의 특징을 분석하고, 간단한 필터 설계에 의해서 본래의 가상 음향을 그대로 유지하면서 선명도를 높일 수 있는 방법을 제시한다. 제시한 방법은 특히 모노 및 뉴스모드와 같이 음성이 많이 들어 있는 부분에서 뛰어난 성능을 보인다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.744-746
• /
• 2003

A ZnO varistor with reference voltage 250V/mm was fabricated through the control of particle size in slurry and the variation of sintering conditions. It was found that to measure the flatness of the V-I characteristic curve in the small-current region and the flatness of the V-I characteristic curve in a large-current region was improved nonlinearity of the fabricated ZnO varistor. According to the IEC 60099-4 was measured the accelerated aging test and high current test of the distribution class surge varistor which is excellent in respect to the property of ZnO varistor.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.443-446
• /
• 1989

154kV insulator strings are frequently damaged by lightning strokes, overvoltage and contamination. And this insulator damage inflicts a loss on the power company. The purpose of this paper is to develop the arcing horn as a protective device of 154kV insulator strings against lightning flashover and overvoltages. So We have developed the arcing horn which is suitable for 154kV transmission line and estimated the performance of arcing horn by high current arcs and high voltage tests.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.171-173
• /
• 2019

In this paper, 10kV solid-state pulsed power modulator with high repetition rate is described. The modulator is based on a Marx generator that charges capacitors in parallel and discharges them in series. Twelve IGBTs and capacitors are connected in series to generate output voltages up to 10kV at a repetition rate of 100kHz. The volume of the modulator is 26.1 liters, and its maximum average output power is 10kW. Therefore, the compact design is achieved with a high power density of 380 W/L. Finally, it is confirmed that the pulsed power modulator can operate stably through the experiment results at 10kV 100kHz condition.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.58 no.4
• /
• pp.437-446
• /
• 2009

Solar, as an ideal renewable energy, it has inexhaustible, clean and safe characteristics. In order to improve the photovoltaic system efficiency and utilize the solar energy more fully, and the DC current and DC power vary with the irradiation and module temperature, it is necessary to study the characteristics of photovoltaic I-V and P-V according to the external factors. This paper presents the analysis of characteristics of photovoltaic I-V and P-V according to the irradiation and the module temperature. The results show that the DC current and the DC power of the photovoltaic system are increased along with the increasing values of irradiation.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.11
• /
• pp.1751-1757
• /
• 2007

Elastin-like polypeptides (ELPs) undergo a reversible inverse phase transition upon a change in temperature. This thermally triggered phase transition allows for a simple and rapid means of purifying a fusion protein. Recovery of ELPs-tagged fusion protein was easily achieved by aggregation, triggered either by raising temperature or by adding salt. In this study, levansucrase has been used as a model enzyme in the development of a simple one-step purification method using ELPs. The levansucrase gene cloned from Pseudomonas aurantiaca S-4380 was tagged with various sizes of ELPs to functionally express and optimize the purification of levansucrase. One of two ELPs, ELP[V-20] or ELP[V-40], was fused at the C-terminus of the levansucrase gene. A levansucrase-ELP fusion protein was expressed in Escherichia coli $DH5{\alpha}$ at $37^{\circ}C$ for 18 h. The molecular masses of levansucrase-ELP[V-20] and levansucrase-ELP[V-40] were determined as 56 kDa and 65 kDa, respectively. The phase transition of levansucrase-ELP[V-20] occurred at $20^{\circ}C$ in 50 mM Tris-Cl (pH 8) buffer with 3 M NaCl added, whereas the phase transition temperature ($T_t$) of levansucrase-ELP[V-40] was $17^{\circ}C$ with 2 M NaCl. Levansucrase was successfully purified using the phase transition characteristics of ELPs, with a recovery yield of higher than 80%, as verified by SDS-PAGE. The specific activity was measured spectrophotometrically to be 173 U/mg and 171 U/mg for levansucrase-ELP[V-20] and levansucrase-ELP[V-40], respectively, implying that the ELP-tagging system provides an efficient one-step separation method for protein purification.

• Journal of Sensor Science and Technology
• /
• v.20 no.3
• /
• pp.156-161
• /
• 2011

We fabricated a schottky barrier metal oxide semiconductor field effect transistor(SB-MOSFET) by applying indium-tin-oxide(ITO) to the source/drain on a highly resistive GaN layer grown on a silicon substrate. The MOSFET, with 10 ${\mu}M$ gate length and 100 ${\mu}M$ gate width, exhibits a threshold gate voltage of 2.7 V, and has a sub-threshold slope of 240 mV/dec taken from the $I_{DS}-V_{GS}$ characteristics at a low drain voltage of 0.05 V. The maximum drain current is 18 mA/mm and the maximum transconductance is 6 mS/mm at $V_{DS}$=3 V. We observed that the spectral photo-response characterization exhibits that the cutoff wavelength was 365 nm, and the UV/visible rejection ratio was about 130 at $V_{DS}$ = 5 V. The MOSFET-type UV detector using ITO, has a high UV photo-responsivity and so is highly applicable to the UV image sensors.