• Korean Journal of Materials Research
• /
• v.12 no.5
• /
• pp.359-362
• /
• 2002

DBPAS has been used to characterize atomic level defect structures in materials. In this investigation the numerical analysis of the Doppler spectra was restricted to the determination of the shape parameter, S, defined as the ratio between the total amount of counts in a central portion of the spectrum and the total amount of counts. As samples were exposed by X-ray increasing from 3, 6, and 9 Gy with 6 MV, and 10 MV each and also by E-beam increasing the energies with 6 MeV, 9 MeV, 12 MeV, and 20 MeV. The S-parameter values were increased as increasing the exposed time and the energies. The S-parameters of the large and small size grains in $CaWO_4$ were measured. The S-parameter of the small size grains in $CaWO_4$ was resulted in larger values.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.2
• /
• pp.425-432
• /
• 2019

Molecular dynamics simulations were carried out to analyze the impact on turbine rotational power based on nozzle shapes. y varying two parameters, turbine rotational velocity w and initial velocities ($V_x,V_y$) for generating molecules, turbine rotation velocities of molecules in turbine entrance arc region and turbine exit arc region were calculated. Average momentums were calculated over two regions, respectively and the differences (AMD) were compared and analyzed. The optimal range of w values to enhance AMD was investigated over 4 different nozzle shapes used, and an excellent nozzle shape to achieve more turbine rotational power was drawn.

• Journal of Korean Vacuum Science & Technology
• /
• v.6 no.1
• /
• pp.12-15
• /
• 2002

The physical properties, including magneto-optical and transport ones, of Ni$_2$MnG$_2$ alloy in the martensitic and austenitic states were investigated. The dependence of the temperature coefficient of resistivity on temperature shows kinks at the structural and ferro-para magnetic transitions. Electron-magnon and electron-phonon scattering are analyzed to be the dominant scattering mechanisms of the Ni$_2$MnG$_2$ alloy in the martensitic and austenitic states, respectively. The experimental real parts of the off-diagonal components of the dielectric function present two sharp peaks, one at 1.9 eV and the other at 3.2 eV, and a broad shoulder at 3.5 eV, all are identified by the band-structure calculations. These peak positions are coincident with those in the corresponding optical-conductivity spectrum, which is thought to originate from the single-spin state in Ni$_2$MnG$_2$ alloy.

• Nuclear Engineering and Technology
• /
• v.13 no.4
• /
• pp.207-220
• /
• 1981

The Np-237 fission cross-sections up to 20 MeV incident neutron energy are calculated by means of the computer code STAPRE- a statistical model code with consideration of preequilibrium decay. The higher chance fissions up to third compound nucleus are taken into account, and the main input parameters in the treatment of fission under consideration of a double-humped fission barrier are carefully adjusted, so that the current trend of experimental data can be fitted within an apparent deviation of about 10% throughout the entire energy range. Results are presented in the form of point-wise cross-section values, and also in the form of graph to demonstrate the shape agreement.

• Korean Journal of Weed Science
• /
• v.17 no.3
• /
• pp.303-309
• /
• 1997

Variation of morphological and physiological traits of 50 Bidens tripartita accessions were studied and the accessions were grouped through cluster analysis based on four major characters; plant type, leaf partition, achene length, days to flowering. Bidens tripartite accessions have shown significant variations in plant type, stem length, days to flowering, leaf shape, leaf partition, chlorophyll content, leaf color, stem color, achene color, achene length and achene shape. Most of Bidens tripartite accessions appeared to have strong dormancy and also photodormancy with some exceptions. Plants could be classified into 5 types from straight(I) to triangle(V), and intermediate diamond type(III) was prevalent. The plant type score has negative correlation with the stem length. None, three, and five part leaved plants were observed and most of them were three or five parted. Leaf partition had negative correlation with achene length and chlorophyll content. Average days to flowering was 108 days in the range of 94~141 days. It had positive correlation with achene length and leaf shape and negative correlation with achene color. Average achene length was 10.0mm and it had positive correlation with achene shape, stem length, days to flowering and leaf shape. It also had negative correlation with leaf color, stem color, achene color, leaf partition. Bidens tripartite accessions could be divided into identifiable six groups from the cluster analysis at the distance 0.06 using Ward's minimum-variance method.

• Applied Microscopy
• /
• v.17 no.1
• /
• pp.83-97
• /
• 1987

In order to discriminate the enteroendocrine cell types in the mucosal epithelium of the normal duodenum of the Korean hedgehog (Erinaceus koreanus). The tissues were fixed in the mixture of 1% paraformaldehyde and 1% glutaraldehyde in phosphate buffer (pH 7.2), and postfixed in 2% osmium tetroxide (phosphate buffer, pH 7.2). They were embedded in Araldite, and the ultrathin sections were made by LKB-V ultratome following the inspection of semithin sections stained with toluidine blue-borax solutions. Ultrathin sections contrasted with uranyl acetate and lead citrate were observed with JEM 100B electron microscope. At least six types of enteroendocrine cells distributed in the mucosal epithelium of the duodenum were identified according to their morphological characteristics mainly based on the size, shape, number and electron density of the secretory granules. Type I cells had moderately developed organelles. The secretory granules were pleomorphic ($370X510nm$), and the granule cores with high electron density were enveloped in limiting membrane and characterized by a narrow halo. Type II cells contained an indented nucleus and well-developed organelles. The secretory granules were round (350 nm) and classified in two kinds by electron density, moderate and high. Both granules were surrounded by limiting membrane and those with high electron density showed often a wide halo. Type III cells had an indented nucleus. The secretory granules with various electron density were round (220 nm) in shape. The granules with high electron density were enveloped in limiting membrane and characterized by a narrow halo, but those with low or moderate electron density had not been observed the limiting membrane. Type IV cells contained an indented nucleus and moderately developed organelles. The secretory granules were round (180 nm) in shape, and the granule cores with high electron density were enveloped in limiting membrane and showed often a wide halo. Type V cells had a large amount of rough endoplasmic reticulum. Secretory granules with low or moderate electron density were round (230 nm) in shape, and surrounded by limiting membrane and showed a narrow halo. Type VI cells contained an oval nucleus and well-developed organelles, especially Golgi complex. The secretory granules with high electron density were round (210 nm) in shape. The granules were enveloped in limiting membrane and showed often a wide halo.

• Journal of Sericultural and Entomological Science
• /
• v.30 no.1
• /
• pp.33-39
• /
• 1988

In the case of white cocoon, the fluorescence colors are classified as a yellowish fluorescence cocoon(Y.F.C.) and a violet fluorescence cocoon(V.F.C.) by exposing to ultra-violet ray. Accordingly, experiments were carried out to investigate the difference of sericin behaviors between Y.F.C. and V.F.C. by measuring the sericin solubility, surface tension and viscosity of the sericin solution. Also, the reelability of two different type of cocoons was investigated in the silk reeling process. The results were summarized as follows; 1. The sericin solubility of Y.F.C. shell is higher than that of V.F.C. shell with the dissolution temperature and time. It is shown that the sericin solubility curves of Y.F.c. and V.F.C. are similar in shape, but the difference of sericin solubility between Y.F.C. and V.F.C. is more significant at higher bath temperature. 2. The initial sericin dissolution curves of Y.F.C. and V.F.C. cocoon shell can be divided by four parts within the range of dissolving time from 5 minutes to 60 minutes. The initial dissolution velocity of Y.F.C. shell is faster than that of V.F.C. but the velocity difference is negligible after 30 minutes of dissolving time. 3. The gelation of V.F.C. sericin solution is faster than that of Y.F.C. at early stage(in the range of 15 minutes to 60 minutes). 4. In the silk reeling process, the reelability of Y.F.C. is better than that of V.F.C. with about 11%. This is mainly due to the higher sericin solubility in Y.F.C. followed by the fast dissolution velocity.

• Journal of the Korean Society for Heat Treatment
• /
• v.33 no.3
• /
• pp.99-106
• /
• 2020

Selective laser melting (SLM) is an additive manufacturing process by melting metallic powders and stacking into layers, and can product complex shapes or near-net-shape (NNS) that are difficult to product by conventional processes. Also, SLM process is able to raise the efficiency of production by creating a streamlined manufacturing process. For manufacturing in SLM process using Ti-6Al-4V powder, analysis of microstructural evolution and evaluation of mechanical properties are essential because of rapid melting and solidification process of powders according to high laser power and rapid scan speed. In addition, it requires a post-processing because the soundness and mechanical properties are degraded by defects such as pore, un-melted powder, lack-of-fusion, etc. In this study, hot isostatic press (HIP) was conducted as a post-processing on SLM-printed Ti-6Al-4V alloy. Microstructure of post-processed Ti-6Al-4V alloy was compared to as-built Ti-6Al-4V, and the evolution of quasi-static (Vickers hardness, room temperature tensile characteristic) and dynamic (high-cycle fatigue characteristic) mechanical properties were analyzed.

• Journal of IKEEE
• /
• v.20 no.4
• /
• pp.392-397
• /
• 2016

In this paper, Characteristics of the ITO thin film deposited were analyzed using DC magnetron sputtering in order to investigate the deposition conditions of ITO thin film for transparent electrode. The experiment conditions were atmospheric pressure from 1 to 3[mTorr] with 1 [mTorr] step, bias electric voltage ranged from 260[V] to 330[V] with 10[V] step. The transmittance, refractive index and surface and cross-sectional shape of the deposited thin film were measured with an UV.-VIS. spectrophotometer, ellipsometer and SEM. Such condition as 1~2[mTorr] and near 300[V] voltage the transmittance was over 90[%] and the refractive index more than 2. Therefore, it was confirmed that the appropriate condition for making a highly transparent conductive electrode.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.74-74
• /
• 2018

Ti-6Al-4V alloys have been widely used as orthopedic materials because of their excellent corrosion resistance and mechanical properties. However, it does not bind directly to the bone, so it requires a surface modification. This problem can be solved by nanotube and micropore formation. Plasma electrolytic oxidation (PEO) treatment for micropore, which combines high-voltage spark and electrochemical oxidation, is a new way of forming a ceramic coating on light metals such as titanium and its alloys. This method has excellent reproducibility and can easily control the shape and size of the Ti alloy. In this study, formation of bioactive surface by PEO-treatment after $2^{nd}$ ATO technique of Ti-6Al-4V alloy was invesgated by various instrument. Nanotube oxide surface structure was formed on the surface by anodic oxidation treatment in 0.8 wt.% NaF and 1M $H_3PO_4$ electrolytes. After nanotube formation, nanotube layer was removed by ultrasonic cleaning. PEO-treatment was carried out at 280V for 3 minutes in the electrolytic solution containing the bioactive substance (Mg, Zn, Mn, Sr, and Si). The surface of Ti-6Al-4V alloy was observed by field emission scanning electron microscopy (FE-SEM, S-4800 Hitachi, Japan). An energy dispersive X-ray spectrometer (EDS, Inca program, Oxford, UK) was used to analyze the spectra of physiologically active Si, Mn, Mg, Zn, and Sr ions. The PEO film formed on the Ti-6Al-4V alloy surface was characterized using an X-ray diffractometer (TF-XRD, X'pert Philips, Netherlands). It is confirmed that bioactive ions play an essential role in the normal bone growth and metabolism of the human skeletal tissues.