• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1285_1286
• /
• 2009

본 논문에서는 지하철 인버터 회로에 사용 환경에 적합하면서 높은 과도 전압(dV/dt)에 견딜 수 있는 건식형 스너버용 커퍼시터를 설계 및 제작하여 특성을 검토하고자 한다. 필름 커패시터는 환경적 측면을 고려하여 에폭시 몰드형 건식형을 적용하였다. 증착 필름에 적용되는 금속은 Zn 전극에 비하여 Al 전극이 우수한 커패시터 특성을 나타내었으며 패턴의 경우에도 T-pattern에서 정전용량 및 손실의 변화율이 작게 나타났다. Al 금속전극에 wave-cut를 적용한 T - pattern 필름으로 DC 1650V, 12 uF, 정격전류 40 A의 커패시터를 제작하여 ESR 및 유전 손실이 적은 제품을 구현할 수 있으며 내구성 및 surge test 결과 신뢰성 규격을 만족하였다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.44 no.1
• /
• pp.68-74
• /
• 2008

This study is concerned with the development of the basic planing hull form of small fishing boat in 25 knots high speed. A series of model test to determine the optimum performance hull form of actual fishing boat with 10 gross tonnage was carried out for 5 models made available planing hull form in the circulation water channel. Model test was performed with the resistance test to study the hydrodynamic characteristics of model ships and the sinkage and trim measurement to investigate the stability of model ships and also the wave pattern observation to analyze the effectiveness of model ships. As the result, the planing hull form of P-4 with deep V type bow can be derived as the best hull form with good performance especially in ship's resistance efficiency showing less residual resistance and sinkage and trim and the spray effect, etc..

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.314.1-314.1
• /
• 2014

The properties of Ni/Au Ohmic contacts formed on nonpolar a-plane GaN grown on r-plane sapphire substrate with different tilt angles are investigated using current-voltage (I-V) measurements. To investigate the effects of pattern direction and size on Ohmic contact properties of a-plane GaN, transmission line method (TLM) patterns are formed either along c-axis and m-axis on nonpolar GaN surface with different size. I-V measurement results show that the size of TLM pattern and formation direction of electrode have an effect on the electrical properties of a-plane GaN. The large sized patterns show the relatively lower sheet resistance compared to the small sized patterns. In addition, the sheet resistance of a-plane GaN along m-axis shows lower values than that along the c-axis. Finally, the effects of miscut angle of r-sapphire substrate ($0.2^{\circ}$, 0.4oand $0.6^{\circ}$) on electrical properties of a-plane GaN will be discussed.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.332-333
• /
• 2018

This paper presents an advanced abnormal over-current protection with $SuperFET^{(R)}$ 800V MOSFET in Flyback converter. In advanced abnormal over-current protection, digital pattern generator is proposed to detect a steep di/dt current condition when secondary rectifier diode or the transformer is shorted. If current sensing signal is larger than current limit during consecutive switching cycle, Gate signal will be stopped for 7 internal switching periods. If the abnormal over-current maintains pattern, the controller goes into protection mode. The Advanced over-current protection has been implemented in a 0.35um BCDMOS process (ON Semiconductor process).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.3
• /
• pp.12-17
• /
• 2011

In this paper, we report on the improved electrical and optical characteristics for decreasing current crowding effect and uniform current distribution by designing octagonal finger type electrode pattern in large-scale lateral GaN (Gallium Nitride) LED (Light-emitting diode) with numerical 3-D simulator. Compared with the conventional electrode pattern, proposed electrode pattern was investigated to confirm the improvement of characteristics. From the simulation results of 3-D SpeCLED/RATRO simulator, we found that the forward voltage was decreased by 0.34 V and the light output power was improved by 7.72 mW at the same injection current condition in the LED with proposed octagonal finger type electrode.

• Laser Solutions
• /
• v.7 no.3
• /
• pp.37-46
• /
• 2004

The shape and size variations of the nanopatterns produced on a polymer film using a near-field scanning optical microscope(NSOM) are investigated with respect to the process variables. A cantilever type nanoprobe having a 100nm aperture at the apex of the pyramidal tip is used with the NSOM and a He-Cd laser at a wavelength of 442nm as the illumination source. Patterning characteristics are examined for different laser beam power at the entrance side of the aperture($P_{in}$), scan speed of the piezo stage(V), repeated scanning over the same pattern, and operation modes of the NSOM(DC and AC modes). The pattern size remained almost the same for equal linear energy density. Pattern size decreased for lower laser beam power and greater scan speed, leading to a minimum pattern width of around 50nm at $P_{in}=1.2{\mu}W\;and\;V=12{\mu}m/s$. Direct writing of an arbitrary pattern with a line width of about 150nm was demonstrated to verify the feasibility of this technique for nanomask fabrication. Application on high-density data storage is discussed.

• The Korea Journal of Herbology
• /
• v.26 no.1
• /
• pp.35-39
• /
• 2011

Objectives : Genetic analysis and taste pattern were performed to identify species between Glycyrrhiza uralensis and G. glabra which are officially listed in Korean Pharmacopoeia IX as origin of Gamcho(g$\={a}$nc$\v{a}$o, licorice root, Glycyrrhizae Radix et Rhizoma). Methods : Genetic analysis showed that identification between two species was done by comparing base sequence of ITS(intergenic transcribed spacer) and trnH-psbA regions from eleven Gamchoes sold in market. There was different taste pattern using by taste sensor in Glycyrrhiza uralensis and G. glabra. Results : Genetic analysis showed that six Gamchoes from China were identified as Glycyrrhiza uralensis and five Gamchoes from Uzbekistan were G. glabra. From the results of taste pattern, sourness and astringency of Glycyrrhiza uralensis from China were significantly higher than G. glabra from Uzbekistan, and aftertaste of astringency, aftertaste of umami, and saltiness of Glycyrrhiza uralensis were signicantly low as compared to G. glabra. There is no significant difference between two species in terms of bitterness, aftertaste of bitterness, and umami. Conclusions : Taken together, Glycyrrhiza uralensis from China and G. glabra from Uzbekistan were identified by taste sensor, and this technic could be applied to establishment of taste pattern marker for identification of different species located in various regions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.5 s.120
• /
• pp.539-546
• /
• 2007

In this paper, a 3-D EM simulation methodology for on-chip spiral inductor analysis has provided and it is shown that the methodology can be adapted to the highly predictable design for CMOS VCO. LC-resonator type VCO have fabricated by using standard 0.25 um CMOS process. And the LC VCO layout case which has pattern ground shielded inductors and the other layout case which has no pattern grounded inductors were fabricated for the verification of their effects on the VCO's phase noise by reducing the Q-factor of inductors. Fabricated VCO has 3.094 GHz, -12.15 dBm output at the tuning voltage of 2.5 V, and from the simulation, Q-factor of the pattern grounded inductor has increased 8% at 3 GHz, and from the measurement results, the phase noise has reduced by 9 dB at the 3 MHz off-set frequency for the pattern grounded inductor layout case.

• Journal of ILASS-Korea
• /
• v.26 no.3
• /
• pp.127-134
• /
• 2021

Fire sprinkler initial spray was analyzed by Large eddy simulation (LES) and Volume of Fluid (VoF) integrated method. The IsoAdvector geometric VoF was used to identify the liquid-gas interface clearly even with the large Courant-Friedrichs-Lewy number. To reduce the computational costs, sector meshes and Adaptive Mesh Refinement up to level 3 were used. Base mesh size was 1 mm, which is roughly equivalent to the initial sprinkler droplet. Top surface radius of boss and deflector size were modified to investigate the effects of sprinkler head design on primary breakup process. When top surface radius of boss was increased, vertical liquid sheet was formed. This phenomenon reduced the sheet breakup radius, sheet thickness and velocity. Due to reduced liquid sheet thickness, a large amount of ligaments was created from the liquid sheet. As a result, there was a dramatic decrease in volume per surface area, indicating an increase in breakup process. Spray pattern viewed in radial direction also changed when top surface radius of boss increased. When top surface radius of boss was increased, a T-shaped pattern was observed while a V-shaped pattern was observed in all other cases. When the deflector size increases, the spray pattern remains V-shaped, even if the top surface radius of boss increased. Further studies on promoting atomization of the water supplied to the lower part of the sprinkler head in the T-shape pattern should be conducted.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.1
• /
• pp.10-17
• /
• 2021

The cymbal transducer is a miniaturized version of the Class V flextensional transducer. It has low resonant frequency and high output pressure characteristics compared with its size. However, since it has high quality factor and low energy conversion efficiency as well, it is often used as an array rather than single. When used as an array, a big change in the frequency characteristics occurs in comparison with that of the single transducer due to the interaction between constituent transducers. In this study, we designed a pattern of cymbal array with a view to having broadband characteristics. Three transducers having different center frequencies were designed first. The designed cymbal transducers were used to construct all possible patterns of a 3 × 3 planar array. After analyzing frequency characteristics of these patterns, based on the results, we derived the most effective pattern to achieve a higher fractional bandwidth. The derived array pattern showed an improvement of the fractional bandwidth by 24.9 % in comparison with the reference model.