Browse > Article
http://dx.doi.org/10.15435/JILASSKR.2021.26.3.127

Analysis of Primary Breakup Characteristics Depending on the Boss and Deflector Dimension of Fire Sprinkler Head using LES-VoF  

Kim, Taehoon (서울과학기술대학교 안전공학과)
Publication Information
Journal of ILASS-Korea / v.26, no.3, 2021 , pp. 127-134 More about this Journal
Abstract
Fire sprinkler initial spray was analyzed by Large eddy simulation (LES) and Volume of Fluid (VoF) integrated method. The IsoAdvector geometric VoF was used to identify the liquid-gas interface clearly even with the large Courant-Friedrichs-Lewy number. To reduce the computational costs, sector meshes and Adaptive Mesh Refinement up to level 3 were used. Base mesh size was 1 mm, which is roughly equivalent to the initial sprinkler droplet. Top surface radius of boss and deflector size were modified to investigate the effects of sprinkler head design on primary breakup process. When top surface radius of boss was increased, vertical liquid sheet was formed. This phenomenon reduced the sheet breakup radius, sheet thickness and velocity. Due to reduced liquid sheet thickness, a large amount of ligaments was created from the liquid sheet. As a result, there was a dramatic decrease in volume per surface area, indicating an increase in breakup process. Spray pattern viewed in radial direction also changed when top surface radius of boss increased. When top surface radius of boss was increased, a T-shaped pattern was observed while a V-shaped pattern was observed in all other cases. When the deflector size increases, the spray pattern remains V-shaped, even if the top surface radius of boss increased. Further studies on promoting atomization of the water supplied to the lower part of the sprinkler head in the T-shape pattern should be conducted.
Keywords
Fire sprinkler; Primary breakup; Large eddy simulation; Deflector plate;
Citations & Related Records
연도 인용수 순위
  • Reference
1 "NFSC 103, Automatic sprinkler systems fire safety code", National Fire Agency (South Korea), 2017.
2 X. Zhou, S. P. D'Aniello and H. Yu, "Spray characterization measurements of a pendent fire sprinkler", Fire Safety Journal, Vol. 54, 2012, pp. 36~48.   DOI
3 L. Zlatanovic, J. Vreeburg, J. P. van der Hoek and I. Poznakovs, "An experimental study on the spray characteristics of residential sprinklers under low-flow and low-pressure conditions", Fire Safety Journal, Vol. 68, 2014, pp. 30~40.   DOI
4 T. M. Myers and A. W. Marshall, "A description of the initial fire sprinkler spray", Fire Safety Journal, Vol. 84, 2016, pp. 1~7.   DOI
5 A. Yoshizawa, "Statistical theory for compressible turbulent shear flows, with the application to subgrid modeling", The Physics of Fluids, Vol. 29, No. 7, 1986, pp. 2152~2164.   DOI
6 F. Abbas, B. Wang, M. Cleary and A. Masri, "Numerical convergence of volume of fluid based large eddy simulations of atomizing sprays", Physics of Fluids, Vol. 33, No. 4, 2021, pp. 042119-1~042119-18.   DOI
7 J. U. Brackbill, D. B. Kothe and C. Zemach, "A continuum method for modeling surface tension", Journal of Computational Physics, Vol. 100, No. 2, 1992, pp. 335~354.   DOI
8 J. Roenby, H. Bredmose and H. Jasak, "A computational method for sharp interface advection", Royal Society open science, Vol. 3, No. 11, 2016, pp. 160405-1~160405-25.   DOI
9 A. W. Marshall and M. di Marzo, "Modelling aspects of sprinkler spray dynamics in fires", Process Safety and Environmental Protection, Vol. 82, No. 2, 2004, pp. 97~104.   DOI
10 J. C. P. Huang, "The break-up of axisymmetric liquid sheets", Journal of Fluid Mechanics, Vol. 43, No. 2, 1970, pp. 305~319.   DOI
11 E. J. Watson, "The radial spread of a liquid jet over a horizontal plane", Journal of Fluid Mechanics, Vol. 20, No. 3, 1964, pp. 481~499.   DOI
12 X. Zhou and H. Yu, "Experimental investigation of spray formation as affected by sprinkler geometry", Fire Safety Journal, Vol. 46, No. 3, 2011, pp. 140~150.   DOI
13 N. Ren and A. W. Marshall, "Characterizing the initial spray from large Weber number impinging jets", International Journal of Multiphase Flow, Vol. 58, 2014, pp. 205~213.   DOI