• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.291-298
• /
• 2014

This study uses two numerical approaches to analyze the filling behavior of micro patterns on micro-injection molding for V-grooves pattern which cannot be simulated with conventional CAE packages. The parametric studies have been performed to examine the fidelity of micro patterns with respect to temperature, pressure, inlet velocity and pattern location on the mold according to the boundary condition from the macro pressure and velocity data which can be obtained by conventional CAE packages. Through these numerical approaches, the filling behavior of polymer melt in micro patterns can be understood, the quality of replication can be predicted, and the V-groove pattern can be shaped uniformly during the process of injection molding.

• 한국생산제조학회지
• /
• 제20권5호
• /
• pp.523-527
• /
• 2011

Polycarbonate (PC) polymer is an engineering plastic which has large tensile strength and impact resistance and is wildly used as functional parts like micro mold. Direct machining of PC materials produces lots of burrs and rough surface due to large ductility and weak heat resistance and hence it is very difficult to machine PC materials using cutting tool to make micro-parts. In this study, elliptical vibration cutting (EVC) or 2-dimensional vibration cutting was performed to minimize the size of micro V-grooves on PC material. From the experimental results, it was observed that as the cutting depth and pattern size become smaller, the better machining quality was obtained, which is attributed to the positive effect of EVC that is dependent on the ratio of vibration amplitude to cutting depth. As the height of V-groove becomes less than $1.8{\mu}m$, however, the machining quality becomes lower as the pattern size decreases.

• 대한기계학회논문집A
• /
• 제38권11호
• /
• pp.1201-1206
• /
• 2014

본 논문에서는 가상의 V상차 작업을 위한 이벤트 기반의 휠로더 운전자 모델을 개발하였다. 운전자 모델 개발의 목적은 휠로더의 일반적인 작업인 V상차 작업 시 동역학적 해석과 작업성능을 가상의 시뮬레이션 모델과 운전자 입력을 이용해 예측 및 평가하는 것이다. V상차 작업은 4단계로 이루어져 있으며, 총 8 개의 이벤트로 인해 순차적으로 작업이 진행된다. 개발된 3D 휠로더 시뮬레이션 모델은 Matlab/Simulink 환경에서 구성 되었으며, 시뮬레이션 결과는 V상차 작업의 실차 데이터와 비교 되었다. 본 연구에서 개발된 운전자 모델로 향후 가상의 V상차 작업에 대한 작업성능 및 동역학적 해석이 가능할 것으로 본다.

• 터널과지하공간
• /
• 제20권5호
• /
• pp.325-331
• /
• 2010

이 연구에서는 사암 벤치에 대하여 V형과 경사 V형의 두 가지 기폭 패턴으로 대규모 발파를 실시하였다. 장약량은 비슷하였다. 발파 후 디지털 이미지 프로세싱 방법으로 파쇄석의 파쇄도를 평가하였다. 10 $m^3$ 용량 로우프 쇼벨의 싸이클 시간도 계측하였다. 그 결과는 경사 V형으로 기폭한 경우 파쇄성능이나 굴착기 성과가 더 향상된다는 것을 보여준다. 이 논문에서는 경사 V형 패턴이 V 형 패턴보다 더 나은 성능을 보이는 이유에 대하여 논한다.

• Journal of Microbiology and Biotechnology
• /
• 제22권8호
• /
• pp.1107-1112
• /
• 2012

Outbreaks of foodborne diseases associated with Vibrio species such as V. parahaemolyticus, V. vulnificus, and V. cholerae frequently occur in countries having a dietary habit of raw seafood consumption. For rapid identification of different Vibrio species involved in foodborne diseases, whole-cell protein pattern analysis for 13 type strains of 12 Vibrio species was performed using SDS-PAGE analysis. Pathogenic Vibrio species such as V. parahaemolyticus, V. vulnificus, V. cholerae, V. alginolyticus, V. fluvialis, and V. mimicus were included in the 12 Vibrio species used in this study. Each of the 12 Vibrio species showed clearly specific band patterns of its own. Two different strains of V. parahaemolyticus showed two different SDS-PAGE whole-cell protein patterns, giving the possibility of categorizing isolated strains in the same V. parahaemolyticus species into two subgroups. The 36 Vibrio isolates collected from sushi restaurants in Busan were all identified as V. parahaemolyticus by comparing their protein patterns with those of Vibrio type strains. The identified isolates were categorized into two different subgroups of V. parahaemolyticus. The whole-cell protein pattern analysis by SDS-PAGE can be used as a specific, rapid, and simple identification method for Vibrio spp. involved in foodborne diseases at the subspecies level.

• 한국초지조사료학회지
• /
• 제12권1호
• /
• pp.71-76
• /
• 1992

Starch gel electrophoresis was used to examine the banding pattern of Esterase isozyme in the leaf, root-nodule and seedling of four wild legume species, Trifolim repense, Glycine soja, Phaseolus nipponensis and Vigna uexillata. The number of band, enzyme activity and migrating rate of esterase isozyme varies depending on the species and tissues of legume plants. The isozyme banding pattern in the cotyledon and radicle of T. repense showed same pattern, however, the number of band were varible among the cotyledon of G. soja, P. nipponensis and V. vexzllata, respectively. Est-1 in the leaf of G. soja, V, vexillata. root-nodule of G. soja and seedling of V. vexillata expreesed the highest enzyme activity. The Est-1 showed the rapidest migrating rate among the isozymes.

• 센서학회지
• /
• 제25권6호
• /
• pp.423-430
• /
• 2016

This study used a single metal oxide semiconductor (MOS) sensor to classify the major odorous gases hydrogen sulfide ($H_2S$), ammonia ($NH_3$) and toluene ($C_6H_5CH_3$). In order to classify these odorous substances, the voltage on the MOS sensor heater was gradually reduced in 0.5 V steps 5.0 V to examine the changes to the response by the cooling effect on the sensor as the voltage decreased. The hydrogen sulfide gas showed the highest sensitivity compared to odorless air under approximately 2.5 V and the ammonia and toluene gases showed the highest sensitivity under approximately 5.0 V. In other words, the hydrogen sulfide gas reacted better in the low temperature range of the MOS sensor, and the ammonia and toluene gases reacted better in the high-temperature range. In order to analyze the response characteristics of the MOS sensor by temperature in a pattern, a two-dimensional (2D) x-y pattern analysis was introduced to clearly classify the hydrogen sulfide, ammonia, and toluene gases. The hydrogen sulfide gas was identified by a straight line with a slope of 1.73, whereas the ammonia gas had a slope of 0.05 and the toluene gas had a slope of 0.52. Therefore, the 2D x-y pattern analysis is suggested as a new way to classify these odorous substances.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2007년도 하계종합학술대회 논문집
• /
• pp.79-80
• /
• 2007

In this paper, it tried to observe the relationship of radiation pattern and the polarization of the PCB. First, through the PCB trace structure analysis which is various it leads, it analyzes the feature of the DM/CM and provides the interrelation of far-field radiation pattern and the D/V polarization. Also, like this interrelation it leads, it proposes the PCB pattern plan for a decreasing of EMI.

• 동의생리병리학회지
• /
• 제31권2호
• /
• pp.83-93
• /
• 2017

This study covers pattern differentiation based on Korean medical references, research trend and modern clinical applications about Sleep-Wake disorders of Diagnostic and Statistical Manual of Mental Disorders(DSM-V) published by American Psychiatric Association. Insomnia disorder is mostly caused by yin deficiency of liver-kidney or liver qi depression and main patterns are heart-kidney non-interaction, deficiency-excess complex pattern containing phlegm-heat due to qi stagnation and blood stasis. Hypersomnolence disorder is more due to yang deficiency rather than yin deficiency and it's major pattern is spleen-kidney yang deficiency. Cataplexy is main feature in narcolepsy and corresponds to depressive psychosis or fainting in terms of Korean Medicine and narcolepsy is assumed to be relevant to liver wind. Breathing-related sleep disorders are related with phlegm-fluid retention brought on spleen deficiency with dampness encumbrance. Pattern of circadian rhythm sleep-wake disorders is combined with yin deficiency of liver-kidney or liver qi depression of insomnia disorder and spleen-kidney yang deficiency or dampness-phlegm of hypersomnolence disorder. Yin deficiency with effulgent fire brought on drugs or alcohol is one of main patterns of substance/medication-induced sleep disorder and combined patterns with yin deficiency of liver-kidney and blood stasis or dampness-phlegm-heat are mostly applied clinically. This study drew major and frequently applied patterns of sleep-wake disorders based on Koran medical literature and modern clinical applications. And that can be the groundwork for the task ahead like clinical practice guideline of sleep-wake disorders containing pattern differentiation, diagnosis and prescriptions.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2006년도 춘계 학술대회 발표논문집
• /
• pp.109-112
• /
• 2006

This study investigated the acoustical characteristics of phonatory offset-onset mechanisms. And this study shows the comparative results between non-stutterers (N=3) and a stutterer (N=1). Phonatory offset-onset means a laryngeal articulatory in the connected speech. In the phonetic context V_V), pattern 0(there is no changes) appeared in all subjects, and pattern 4(this indicate the trace of glottal fry and closure in spectrogram)was only in a Stutterer. In high vowels(/i/, /u/), pattern 3 and 4 appeared only in a stutterer. Although there is no common pattern among the non-stutterers, individual's preference pattern was founded. This study offers the key to an understanding of physiological movement on a block of stutter.