• 제목/요약/키워드: V-angle

검색결과 987건 처리시간 0.027초

단일 시편을 이용한 평면 이방성 암석의 탄성계수 결정 (Determination of Elastic Constants of Transversely Isotropic Rocks from a Single Test Specimen.)

  • 장보안;나광희;장명환
    • 터널과지하공간
    • /
    • 제11권1호
    • /
    • pp.72-78
    • /
    • 2001
  • 평면 이방성 암석의 시추 코아를 이용하여 일회의 단축압축시험만으로 이방성 탄성계수를 구하는 방법이 김호영에 의하여 제시되었으나 실험을 통하여 검정한 결과, 한 방향의 포아송비 v$_2$만을 사용하여 탄성계수를 구하는 방법에 문제가 있음이 발견되었다. 본 연구에서는 두 가지의 포아송비, v$_{12}$와 v$_{21}$을 사용하여 이방성 탄성계수를 계산하는 식을 유도하였고, 이방성의 각이 30$^{\circ}$와 65$^{\circ}$인 2개의 시편에 대하여 이방성 탄성계수를 측정하였다. 이방성 탄성계수는 이방성의 각에 따라 다른 식을 사용하여야 되며, 이방성 각이 45$^{\circ}$이하인 경우 v$_{21}$을, 이방성 각이 45$^{\circ}$이상인 경우에는 v$_{12}$를 이용하여 탄성계수를 계산하여야 할 것으로 사료된다.

  • PDF

비소세포 폐암의 제한된 각도를 이용한 세기변조와 용적변조회전 방사선치료계획의 폐 선량에 관한 연구 (A Study on lung dose of Intensity modulated and volumetric modulated arc therapy plans using restricted angle of Non-small cell lung cancer)

  • 염미숙;이우석;김대섭;백금문
    • 대한방사선치료학회지
    • /
    • 제26권1호
    • /
    • pp.21-28
    • /
    • 2014
  • 목 적 : 비소세포 폐암의 치료용적의 크기가 크거나 폐 용적이 작고, 몸의 정중선(Mid line)에 위치한 경우 척수의 허용선량을 고려한 방사선치료계획에서 폐 선량이 많아지게 되는데, 본 연구는 비소세포 폐암 환자의 3차원입체조형치료(Three dimensional conformal radiotherapy, 3D CRT), 제한된 각도를 이용한 세기변조방사선치료(Intensity modulated radiotherapy, IMRT)와 용적변조회전치료(Volumetric Modulated Arc therapy, VMAT) 치료계획을 각각 적용하여 전체 폐 선량을 비교 및 평가하고자 한다. 대상 및 방법 : TrueBeam STx($Varian^{TM}$, USA) 10 MV 에너지를 이용하여 4명의 환자에 대하여 3D CRT, 제한된 각도를 이용한 IMRT와 VMAT 치료계획을 세우고, 총 선량 66 Gy/30 Fx 처방하였을 때, 선량용적히스토그램(Dose Volume Histogram, DVH)을 이용하여 치료계획용적(Planning Target Volume, PTV), 전체 폐 그리고 척수에 들어가는 선량을 평가하였다. PTV에 대한 처방선량지수(Conformity Index, CI), 선량균질지수(Homogeneity index, HI), 처방선량포함지수(Paddick's Conformity Index, PCI)를 구하고, 폐의 30 Gy 용적($V_{30}$), $V_{20}$, $V_{10}$, $V_5$, 평균선량(Mean dose)을 평가하고, 척수의 최대선량 값을 평가하였다. 결 과 : PTV에 대한 CI, HI, PCI의 평균값은 각각 $0.944{\pm}0.009$, $1.106{\pm}0.027$, $1.084{\pm}0.016$으로 평가되었다. 전체 폐에 대한 첫 번째 환자의 $V_{20}$은 3D CRT, IMRT, VMAT 각각 30.7%, 20.2%. 21.2%, 두 번째 환자의 $V_{20}$은 33.0%, 29.2%. 31.5%, 세 번째 환자의 $V_{20}$은 51.3%, 34.3%. 36.9%, 네 번째 환자의 $V_{20}$은 56.9%, 33.7%. 40%로 제한된 각도를 이용한 IMRT 치료계획에서 가장 낮게 평가되었다. 척수에 대한 최대선량 값은 모두 허용선량 미만으로 평가되었다. 결 론 : 비소세포 폐암의 방사선치료계획에서 3D CRT와 비교했을 때, 제한된 각도를 이용한 IMRT나 VAMT을 이용하면 척수의 허용선량을 넘지 않으면서 폐 선량을 줄여줄 수 있는 치료계획을 세울 수 있었다. IMRT와 VAMT을 비교해보면 PTV의 선량포함과 척수선량을 고려했을 때 IMRT 치료계획에서 보다 좁은 각도를 이용한 치료계획이 가능하였고, 이는 폐 선량을 좀 더 줄여줄 수 있는 결과를 얻을 수 있었다.

Leg-angle 변화에 따른 V-type 초음파모터의 특성 (Characteristics of V-type Ultrasonic Motor with the Change Angle of Legs)

  • 정성수;박민호;김종욱;박충효;정현호;박태곤
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2010년도 하계학술대회 논문집
    • /
    • pp.320-320
    • /
    • 2010
  • In the case of existing ultrasonic motors, they have characteristics such as outstanding response speed, speed and high efficiency. However, it's very hard to use practically them as small motors due to complicated structure and expensive cost. This paper proposed v-type ultrasonic linear motor. Stator of the motor is composed of thin elastic body and four ceramics attached to upper and bottom areas of the body. The ceramics have each direction of polarization. When two harmonic voltages which had $90^{\circ}$ phase difference were applied to the ceramics, the symmetric and anti-symmetric displacements were generated at the tip to make the elliptical motion. To find out a model that generates maximum displacement at contact tip, FEM program was used with change of leg-angle. In addition, optimal model was chosen by considering magnitude and shape of displacement according to change of frequency.

  • PDF

몬테카를로 방식에 의한 스퍼터율 계산에 관한 연구 (Calculation of Sputter Yield using Monte Carlo Techniques)

  • 반용찬;이제희;원태영
    • 전자공학회논문지D
    • /
    • 제35D권12호
    • /
    • pp.59-67
    • /
    • 1998
  • 본 논문에서는 몬테카를로 방식을 사용하여 이온의 에너지에 대한 타겟 원자의 스퍼터율(Sputter Yield), 이온의 주입 각도에 대한 스퍼터율, 이온의 주입에 따른 타겟 원자의 발산 분포를 3차원으로 시뮬레이션 하였다. 중(중)이온으로 (Ar/sup +/)을 사용하였고, 경(輕)이온으로 (H/sup +/)을 사용하여 10 eV에서 100 KeV 영역의 에너지에 따른 스퍼터율을 계산하였다. 또한, 스퍼터 타겟 물질로서 Cu, Al을 사용하여 계산하였고, 실험치와 일치함을 확인하였다. 스퍼터율은 입사 이온의 에너지가 증가함에 따라 증가하는 경향을 보이지만, 임계점 이후에는 점차적으로 감소하는 경향을 보였다. 중이온에 의한 스퍼터에서는 임계점이 10 KeV 영역이었고, 경이온에 의한 스퍼터에서는 1 KeV 이하 영역이었다. 또한, 이온의 주입 각도에 따라서 타겟의 스퍼터율은 점차적으로 증가하였고, 68° 부근에서 최대 스퍼터율을 기록하였다. 이온의 주입 각도에 따른 타겟 원자의 분포도에서는 각도가 커짐에 따라서 타겟 표면 법선 방향으로 방출되는 원자의 수가 많아짐을 확인하였다. 본 연구에서는, CRAY T3E 슈퍼컴퓨터에서 시뮬레이션을 수행하였으며, 구현된 몬테카를로 스퍼터 시뮬레이터의 GUI(Graphic User Interface) 환경을 구축하였다.

  • PDF

각분해 전자 에너지 분석기의 제작에 관한 연구 (The study on an angle resolving electron energy analyser)

  • 권순남;이명호;송호식;박소아;이충만;정광호
    • 한국진공학회지
    • /
    • 제8권1호
    • /
    • pp.9-12
    • /
    • 1999
  • Angle Resolved Ultraviolet Photoelectron Spectroscopy(ARUPS)용 전자 에너지분석기를 제작하고 그 성능을 조사하였다. 독립적인 각 분해와 에너지 분해를 위하여 3전극 전자 렌즈 2개를 연이어 붙인 동심 반구형으로 제작하였다. 이 분석기의 성능을 조사하기 위하여 Cu(100)의 전자 에너지 구조를 연구하였다. 이 분석기의 최고 에너지 분해능은 40 meV 이하이고 각 분해능은 $0.2^{\circ}$ 임을 확인할 수 있었다.

  • PDF

AZX311 마그네슘 합금과 마르텐사이트 강의 V-bending 이후 전류 인가에 따른 스프링백 각도 변화 평가 (Evaluation of Springback Angle Change with Applying Electric Current After V-bending Test on AZX311 Magnesium Alloy and Martensitic Steel)

  • 박주원;정혜진;진성우;김문조;;한흥남
    • 소성∙가공
    • /
    • 제27권3호
    • /
    • pp.177-183
    • /
    • 2018
  • The influence of electric current on the springback characteristics of AZX311 magnesium alloy and martensitic steel after V-bending test is investigated. Various pulsed electric currents are applied into the specimens followed by a V-bending test, and the changes in the springback angle are measured. In order to evaluate not only the thermal effect but also the athermal effect of electric current on the springback angle, the temperature rises resulting from the applied electric current are measured for all test conditions. As a result, it was found that the springback is significantly decreased as the current density increases. As for the martensitic steel, since the dislocation recovery immoderately occurs at a high electric current density condition of $80A/mm^2$, the optimal current density condition should be required.

The phase angle dependences of Reflectance on Asteroid (25143) Itokawa from the Hayabusa Spacecraft Multi-band Imaging Camera(AMICA)

  • Lee, Mingyeong;Ishiguro, Masateru
    • 천문학회보
    • /
    • 제40권1호
    • /
    • pp.61.3-62
    • /
    • 2015
  • Remote-sensing observation is one of the observation methods that provide valuable information, such as composition and surface physical conditions of solar system objects. The Hayabusa spacecraft succeeded in the first sample returning from a near-Earth asteroid, (25143) Itokawa. It has established a ground truth technique to connect between ordinary chondrite meteorites and S-type asteroids. One of the scientific observation instruments that Hayabusa carried, Asteroid Multi-band Imaging Camera(AMICA) has seven optical-near infrared filters (ul, b, v, w, x, p, and zs), taking more than 1400 images of Itokawa during the rendezvous phase. The reflectance of planetary body can provide valuable information of the surface properties, such as the optical aspect of asteroid surface at near zero phase angle (i.e. Sun-asteroid-observer's angle is nearly zero), light scattering on the surface, and surface roughness. However, only little information of the phase angle dependences of the reflectance of the asteroid is known so far. In this study, we investigated the phase angle dependences of Itokawa's surface to understand the surface properties in the solar phase angle of $0^{\circ}-40^{\circ}$ using AMICA images. About 700 images at the Hayabusa rendezvous phase were used for this study. In addition, we compared our result with those of several photometry models, Minnaert model, Lommel-Seeliger model, and Hapke model. At this conference, we focus on the AMICA's v-band data to compare with previous ground-based observation researches.

  • PDF

V 형 rib과 dimple로 구성된 SAH 덕트에서의 총괄 열성능에 대한 수치적 연구 (Numerical study on overall thermal performance in SAH duct with compound roughness of V-shaped ribs and dimples)

  • 아닐 쿠마르;김만회
    • 한국태양에너지학회 논문집
    • /
    • 제35권4호
    • /
    • pp.43-55
    • /
    • 2015
  • This paper presents the thermal hydraulic performance of a three dimensional rib-roughened solar air heater (SAH) duct with the one principal wall subjected to uniform heat flux. The SAH duct has aspect ratio of 12.0 and the Reynolds number ranges from 2000 to 12000. The roughness has relative rib height of 0.045, ratio of dimple depth to print diameter of 0.5 and rib pitch ratio of 8.0. The flow attack angle is varied from $35^{\circ}$ to $70^{\circ}$. Various turbulent flow models are used for the heat transfer and fluid flow analysis and their results are compared with the experimental results for smooth surfaces. The computational fluid dynamics (CFD) results based on the renormalization k-epsilon model are in better outcomes compared with the experimental data. This model is used to calculate heat transfer and fluid flow in SAH duct with the compound roughness of V-shaped ribs and dimples. The overall thermal performance based on equal pumping power is found to be the highest (2.18) for flow attack angle of $55^{\circ}$. The thermo-hydraulic performance for V-pattern shaped ribs combined with dimple ribs is higher than that for dimple rib shape and V-pattern rib shape air duct.

하악각 골절의 치료 방법에 따른 하악골의 응력 분포 및 변위에 관한 삼차원 유한요소법적 연구 (THE THREE DIMENSIONAL FINITE ELEMENT ANALYSIS OF STRESS DISTRIBUTION AND DISPLACEMENT IN MANDIBLE ACCORDING TO TREATMENT MODALITIES OF MANDIBULAR ANGLE FRACTURES)

  • 구제훈;김일규;장재원;양정은;사시카라 바라라만;왕붕
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • 제32권3호
    • /
    • pp.207-217
    • /
    • 2010
  • The purpose of this study was to evaluate the effects of the stress distribution and displacement in mandible according to treatment modalities of mandibular angle fractures, using a three dimensional finite element analysis. A mechanical model of an edentulous mandible was generated from 3D scan. A 100-N axial load and four masticatory muscular supporting system were applied to this model. According to the number, location and materials of titanium and biodegradable polymer plates, the experimental groups were divided into five types. Type I had a single titanium plate in the superior border of mandibular angle, type II had two titanium plates in the superior tension border and in the inferior compression border of mandibular angle, type III had a single titanium plate in the ventral area of mandibular angle, type IV had a single biodegradable polymer plate in the superior border of mandibular angle, type V had a single biodegradable polymer plate in the ventral area of mandibular angle. The results obtained from this study were follows: 1. Stress was concentrated on the condylar neck of the fractured side except Type III. 2. The values of von-Mises stress of the screws were the highest in the just-posterior screw of the fracture line, and in the just-anterior screw of Type III. 3. The displacement of mandible in Type III was 0.04 mm, and in Type I, II, IV, and V were 0.10 mm. 4. The plates were the most stable in the ventral area of mandibular angle (Type III, V). In conclusion, the ventral area of mandibular angle is the most stable location in the fixation of mandibular angle fractures, and the just- posterior and/or the just-anterior screws of the fracture line must be longer than the other, and surgeons have to fix accurately these screws, and the biodegradable polymer plate also was suitable for the treatment of mandible angle fracture.

Ti-6Al-4V 합금의 ECAP 가공시 미세 조직의 변화 연구 (Microstructural Evolution during the Equal Channel Angular Pressing of Ti-6Al-4V Alloy)

  • 고영건;정원식;신동혁;이종수
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 2002년도 춘계학술대회 논문집
    • /
    • pp.177-180
    • /
    • 2002
  • The effects of pressing temperatures on the formability and the microstructural evolution during equal channel angular pressing (ECAP) of lamellar Ti-6Al-4V alloy were investigated in this study. ECAP above isothermally 600$^{\circ}C$ was successful without producing any noticeable segments at the specimen surfaces after a single pass of pressing. After 4 passes of ECA pressing, lamellar microstructures were significantly refined revealing equiaxed grains of 0.3$\mu\textrm{m}$ in diameter consisting of high angle grain boundaries. Also these ultrafine grains were relatively stable with little grain growth when annealed up to 600$^{\circ}C$ for 1hour.

  • PDF