• 한국전기전자재료학회논문지
• /
• 제19권11호
• /
• pp.1067-1071
• /
• 2006

Prior to destructive testing, diagnostic tests were performed in ten high voltage motors. Diagnostic tests included polarization infer, ac current, dissipation factor$(tan{\delta})$ and partial discharge magnitude. The rewind of motet slater insulation at rated voltage is assessed by the results of these tests. After completing the diagnostic tests, the stator windings of motors were subjected to gradually increasing ac voltage, until the insulation punctured. No. 8 motor failed near rated voltage of 19.0 kV. The breakdown voltage of No. 4 motet was 7.0 kV which is lower that expected for good quality coils in 6.6 kV class motors. The failure was located in a line-end coil at the exit from the core slot. These two motors began operation in 1994. While testing No. 7 motor, flashover occurred between the stator winding and the stator frame at 15 kV. The relationship between the diagnostic test and the drop in insulation breakdown voltage was analyzed.

• TTA 저널
• /
• 통권84호
• /
• pp.146-161
• /
• 2002

TTA(한국정보통신기술협회)는 2002년 10월 8일 (주)이스텔시스템즈(www.eastelsystems.com)의 ATM(asynchronous transfer mode) Router (모델명 : EAR-155)에 대하여 성능 및 aging 시험을 수행하여 국내 최초 TTA Verified 인증서(번호: TTA-V-02-001)를 발급하였다. 본 고에서는 두 대의 EAR-155 ATM Routers를 이용하여 각 라우터의 확장 slot에 Fast Ethernet port, ATM OC3(155 Mbps) port, ATM DS3(44.736 Mbps) port, ATM E1(2.048 Mbps) port 및 TDM E1(2.048 Mbps) port를 장착하여 back-to-back으로 연결한 환경에 대한 no-loss UDP throughput 시험결과를 소개한다.

• 대한치과교정학회지
• /
• 제40권5호
• /
• pp.294-303
• /
• 2010

교정용 브라켓과 강선 사이의 마찰저항력에 영향을 미치는 요소들 중 브라켓 슬롯의 표면조도에 대한 연구가 그동안 많이 시행되어 왔는데 기존 연구는 주로 주사전자현미경(SEM)이나 Prophylometer를 사용하여 이루어졌다. 이 연구는 원자현미경(AFM)을 사용하여 다섯 종류의 브라켓 슬롯의 표면조도를 정량적으로 측정하여 세라믹 브라켓이 스테인리스 스틸 브라켓보다 더 거칠고 다결정 알루미나 브라켓이 단결정 알루미나 브라켓보다 더 거친지 규명하는데 목적이 있다. 대조군인 스테인리스 스틸 브라켓($Succes^{(R)}$)과 두 종류의 단결정 알루미나(Inspire $Ice^{(R)}$, $Perfect^{(R)}$)와 두 종류의 다결정 알루미나(Crystalline $V^{(R)}$, $Invu^{(R)}$)를 슬라이드 글라스에 접착하고 슬롯을 노출시키기 위해 치과용 하이스피드 핸드피스와 샴퍼버를 이용해 윙을 연마하였다. 원자현미경 이미지는 Nanostation $II^{TM}$를 사용하여 관찰하였다. Sa, Sq, Sz 모두 $Invu^{(R)}$와 Inspire $Ice^{(R)}$는 대조군인 $Succes^{(R)}$와 유의미한 차이가 없었으며 $Perfect^{(R)}$와 Crystalline $V^{(R)}$는 $Succes^{(R)}$보다 컸다. $Perfect^{(R)}$와 Crystalline $V^{(R)}$ 사이에서는 Sa, Sq, Sz 모두 유의미한 차이가 없었으며 $Invu^{(R)}$와 Inspire $Ice^{(R)}$ 사이에서도 Sa, Sq, Sz 모두 유의미한 차이가 없었다. 따라서, 대조군인 $Succes^{(R)}$와 단결정 브라켓인 Inspire $Ice^{(R)}$, 다결정 브라켓인 $Invu^{(R)}$가 낮은 조도의 슬롯 표면을 가지고 다결정 브라켓인 Crystalline $V^{(R)}$와 단결정 브라켓인 $Perfect^{(R)}$가 거친 슬롯 표면을 가진 것으로 판단된다. 따라서, 유사한 재질의 브라켓이라도 제조사에 따라 다양한 슬롯 표면조도를 나타낸다고 할 수 있다.

• 한국축산시설환경학회지
• /
• 제8권2호
• /
• pp.79-86
• /
• 2002

This study was conducted to collect basic data about the effects of ventilation types on the interior environment of the enclosed farrowing-nursery pig house in Anseong, Icheon and Jeungpyong. Surveyed ventilation types in the enclosed farrowing-nursery pig house are classified in to 4 types. In V1 type, air enters through a planar slot inlet placed on the juncture of the entering wall and exit through the chimney fan outlet; in V2 type, air enters through a perforated ceiling inlet and exits chimney fan outlet(V2); in V3 type, air enters through a circular duct inlet and exit chimney fan outlet(V3); in V4 type, enters through a circular duct inlet and exits side wall exhaust fan outlet(V4). Temperature, relative humidity, air velocity and ammonia concentration($NH_3$) were measured in the interior of swine building in the summer. Interior temperature was not remarkably different in all ventilation types in this study. However, temperature of the V4 was somewhat lower than that of the other types. Air velocity of the V4 was higher and $NH_3$ concentration of the V4 was lower than those of other ventilation types. It is suggested that the V4 ventilation type be applicable in the enclosed farrowing-nursery pig house in Korea.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제48권10호
• /
• pp.681-686
• /
• 1999

In this study, a windmill type ultrasonic motor operated by single-phase AC electric field was fabricated, and then revolution characteristics and 3-dimensional vibration mode of the ultrasonic motor were investigated. Brass metal was pressed with umbrella-type using metal mold, then slot of 4 kind was processed at various thickness. It was found that the revolution speed of the ultrasonic motor increased with decreasing the thickness of elastic body. The revolution speed of the ultrasonic motor increased with increasing the slots of elastic body. When the characteristics was measured, applied voltage was changed from $10V_{max}\; to\; 100V_{max}$. Then, revolution was began from $30V_{max}$, if voltage was applied over $90V_{max}$ revolution speed was saturated, and not increased. The maximum revolution speed was 510[rpm] when using elastic body with 6 slots and thickness of 0.15mm. And 3-dimensional displacement mode was rotated clockwise direction.

• 대한화학회지
• /
• 제44권2호
• /
• pp.102-108
• /
• 2000

고속액체크로마트그래피에서 RAH분자들이 상대적 용리시간을 다변량선형회귀분석과 인공신경망분석방법을 사용하여 학습시킨 후, 시험 세트의 상대적 용리시간을 예측하였다. PAH의 QSRR에서 주요한 설명인자는 분자연결지수($^1X_v,\;^2X_v$),길이와 폭의 비율(L/B) 및 분자 쌍극자 모멘트(D)이었다, 슬롯 모델과 관계깊은 L/B은 인공신경망분석방법에서는 적절한 설명인자로 작용하나, 다변량회귀분석에서는 그러하지 못하다. 시험세트에서 용리시간 예측도를 나타내주는 분산은 각각 인공신경망분석방법에서 0.0099, 다변량회귀분석방법에서 0.0114이었다. 인공신경망분석방법이 다변량회귀분석보다 더 좋은 결과를 보여준다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.200-203
• /
• 2006

Prior to destructive testing, diagnostic tests were performed in eight high voltage motors. Diagnostic tests included polarization index, ac current, dissipation factor($tan{\delta}$) and partial discharge magnitude. The rewind of motor stator insulation at rated voltage is assessed by the results of these tests. After completing the diagnostic tests, the stator windings of motors were subjected to gradually increasing ac voltage, until the insulation punctured. No. 1 motor failed near rated voltage of 12.96 kV. The breakdown voltage of No. 4 motor was 6.99 kV which is lower that expected for good quality coils in 6.6 kV class motors. The failure was located in a line-end coil at the exit from the core slot. These two motors began operation in 1994. While testing No. 7 motor, flashover occurred between the stator winding and the stator frame at 15 kV. The relationship between the diagnostic test and the drop in insulation breakdown voltage was analyzed.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권2호
• /
• pp.30-36
• /
• 2020

We demonstrated a successful fabrication of 4" Gallium Nitride (GaN)/Diamond High Electron Mobility Transistors (HEMTs) incorporated with Inner Slot Via Hole process. We made in manufacturing technology of 4" GaN/Diamond HEMT wafers in a compound semiconductor foundry since reported [1]. Wafer thickness uniformity and wafer flatness of starting GaN/Diamond wafers have improved greatly, which contributed to improved processing yield. By optimizing Laser drilling techniques, we successfully demonstrated a through-substrate-via process, which is last hurdle in GaN/Diamond manufacturing technology. To fully exploit Diamond's superior thermal property for GaN HEMT devices, we include Aluminum Nitride (AlN) barrier in epitaxial layer structure, in addition to conventional Aluminum Gallium Nitride (AlGaN) barrier layer. The current collapse revealed very stable up to Vds = 90 V. The trapping behaviors were measured Emission Microscope (EMMI). The traps are located in interface between Silicon Nitride (SiN) passivation layer and GaN cap layer.

• 대한의용생체공학회:의공학회지
• /
• 제17권2호
• /
• pp.165-172
• /
• 1996

A scanning slot digital mammography system Luing a plastic scintillating fiber screen (SFS) is currently being developed To improve the x-ray interaction efficiency and absorption efficiency of an SFS, high Z elements can be added into the scintillating fiber core. In this paper, we investigated theoretically the zero spatial frequency detective quantum efficiency, DQE(0), and modulation transfer function, MTF(f), of three 2 cm thick SFSs made of polystyrene, polystyrene loaded with 5% by weight of lead, and polystyrene Loaded with 10% by weight of tin scintillating fibers. X-ray interaction efficiency, scintillating light intensity distributions and line spread functions were generated using Monte Carlo simulation. DQE(0) and MTF(f) were computed for x-ray energies ranging from 15 to 50 keV. Loading high Z elements into the SFS markedly increased the DQE(0). For x-ray energies used for mammovaphy, DQE(0) values of both high Z element loaded SFSs are about a factor of three higher than the DQE(0) of an Min-R screen. At mammographic x-ray energies, MTF(f) values of all three SFSs are Venter than 50% at 25 Ip/mm spatial frequency, and were found to be dominated by the 20 um individual scintillating fiber diameter used The results show that both hiP DQE(0) and spatial resolution can be achieved with the high Z element loaded SFSs, which make these SFSs attractive for use in a scanning slot detector for digital mammography.

• 한국전자파학회논문지
• /
• 제27권12호
• /
• pp.1044-1052
• /
• 2016

본 논문에서는 캐비티 백(Cavity-back) 구조를 이용한 신호 정보 수집용 광대역 안테나를 제안하였다. 제안된 안테나는 캐비티 구조를 가지는 접지면, 마이크로스트립 급전선, 슬롯이 식각된 사각패치로 이루어져 있다. 제안된 안테나는 $55mm{\times}40mm{\times}10mm$의 크기에서 캐비티 구조를 통해 광대역의 대역폭을 갖는다. 안테나의 측정된 10 dB 반사손실 대역폭은 5,030 MHz(3.02~8.05 GHz)이며, 중심주파수 5.05 GHz에서 비 대역폭 90.9 %을 가진다. ANSYS사의 HFSS v.15.0.0을 이용하여 제안된 안테나의 설계 및 시뮬레이션을 수행하였다. 제작 및 측정을 통해 안테나의 성능 및 설계방법의 타당성을 검증하였다.