• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.4
• /
• pp.362-369
• /
• 2011

In this paper, vSLAM aided integrated navigation system is implemented and performance analysis of the system is completed via flight test. The system can suppress divergence of position error of INS only system by updating vSLAM correction information when temporary GPS signal outage occurs in bad radio condition. In the flight test, integrated hardware containing GPS, IMU and camera is loaded under RC electric helicopter. Performance of the integrated navigation system is verified by comparing estimated position of INS/vSLAM system with that of INS only system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.555-563
• /
• 2009

When a mobile mapping system or a robot is equipped with only a GPS (Global Positioning System) and multiple stereo camera system, a transformation from a local camera coordinate system to GPS coordinate system is required to link camera poses and 3D data by V-SLAM (Vision based Simultaneous Localization And Mapping) to GIS data or remove the accumulation error of those camera poses. In order to satisfy the requirements, this paper proposed a novel method that calculates a camera rotation in the GPS coordinate system using the three pairs of camera positions by GPS and V-SLAM, respectively. The propose method is composed of four simple steps; 1) calculate a quaternion for two plane's normal vectors based on each three camera positions to be parallel, 2) transfer the three camera positions by V-SLAM with the calculated quaternion 3) calculate an additional quaternion for mapping the second or third point among the transferred positions to a camera position by GPS, and 4) determine a final quaternion by multiplying the two quaternions. The final quaternion can directly transfer from a local camera coordinate system to the GPS coordinate system. Additionally, an update of the 3D data of captured objects based on view angles from the object to cameras is proposed. This paper demonstrated the proposed method through a simulation and an experiment.

• The Journal of Korea Robotics Society
• /
• v.17 no.3
• /
• pp.353-358
• /
• 2022

Due to the limited field of view of the pinhole camera, there is a lack of stability and accuracy in camera pose estimation applications such as visual SLAM. Nowadays, multiple-camera setups and large field of cameras are used to solve such issues. However, a multiple-camera system increases the computation complexity of the algorithm. Therefore, in multiple camera-assisted visual simultaneous localization and mapping (vSLAM) the multi-view tracking algorithm is proposed that can be used to balance the budget of the features in tracking and local mapping. The proposed algorithm is based on PanoSLAM architecture with a panoramic camera model. To avoid the scale issue 3D LiDAR is fused with omnidirectional camera setup. The depth is directly estimated from 3D LiDAR and the remaining features are triangulated from pose information. To validate the method, we collected a dataset from the outdoor environment and performed extensive experiments. The accuracy was measured by the absolute trajectory error which shows comparable robustness in various environments.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.47-48
• /
• 2022

The positioning technology that measures the position of a person or object is a key technology to deal with the location of the real coordinate system or converge the real and virtual worlds, such as digital twins, augmented reality, virtual reality, and autonomous driving. In estimating the location of a person or object at an indoor construction site, there are restrictions that it is impossible to receive location information from the outside, the communication infrastructure is insufficient, and it is difficult to install additional devices. Therefore, this study tested the direct sparse odometry algorithm, one of the visual Simultaneous Localization and Mapping (vSLAM) that estimate the current location and surrounding map using only image information, at an indoor construction site and analyzed its applicability as an indoor positioning technology. As a result, it was found that it is possible to properly estimate the surrounding map and the current location even in the indoor construction site, which has relatively few feature points. The results of this study can be used as reference data for researchers related to indoor positioning technology for construction sites in the future.

• The Journal of Korea Robotics Society
• /
• v.17 no.3
• /
• pp.334-338
• /
• 2022

In visual simultaneous localization and mapping (vSLAM), the correct recognition of a place benefits in relocalization and improved map accuracy. However, its performance is significantly affected by the environmental conditions such as variation in light, viewpoints, seasons, and presence of dynamic objects. This research addresses the problem of feature occlusion caused by interference of dynamic objects leading to the poor performance of visual place recognition algorithm. To overcome the aforementioned problem, this research analyzes the role of scene semantics in correct detection of a place in challenging environments and presents a semantics aided visual place recognition method. Semantics being invariant to viewpoint changes and dynamic environment can improve the overall performance of the place matching method. The proposed method is evaluated on the two benchmark datasets with dynamic environment and seasonal changes. Experimental results show the improved performance of the visual place recognition method for vSLAM.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.1
• /
• pp.36-43
• /
• 2021

In this research, the accuracy of YOLO v3 algorithm in object detection during AGV (Automated Guided Vehicle) operation was investigated. First of all, AGV with 2D LiDAR and stereo camera was prepared. AGV was driven along the route scanned with SLAM (Simultaneous Localization and Mapping) using 2D LiDAR while front objects were detected through stereo camera. In order to evaluate the accuracy of YOLO v3 algorithm, recall, AP (Average Precision), and mAP (mean Average Precision) of the algorithm were measured with a degree of machine learning. Experimental results show that mAP, precision, and recall are improved by 10%, 6.8%, and 16.4%, respectively, when YOLO v3 is fitted with 4000 training dataset and 500 testing dataset which were collected through online search and is trained additionally with 1200 dataset collected from the stereo camera on AGV.

• Journal of the Korea Society for Simulation
• /
• v.3 no.1
• /
• pp.29-42
• /
• 1994

The architecture of a MIMD-type parallel computer system is specified: a simulator is developed to support design and evaluation of systems based on the architecture: and conducted with the simulator to evaluate system performance. The horizontal/vertical-bus(H/V-bus) system architecture provides an NxN array of processing elements which communicate with each other through a network of N horizontal buses and N vertical buses. The simulator, written in SLAM II and FORTRAN, is designed to provide high-resolution in simulating the IPC mechanism. Parameters provide the user with independent control of system size, PE speed and IPC mechanism speed. Results generated by the simulator include execution times, PE utilizations, queue lengths, and other data. The simulator is used to study system performance when a partial differential equation is solved by parallel Gauss-Seidel method. For comparisons, the benchmark is also executed on a single-bus system simulator that is derived from the H/V-bus system simulator. The benchmark is also solved on a single PE to obtain data for computing speedups. An extensive analysis of results is presented.

• ETRI Journal
• /
• v.10 no.3
• /
• pp.101-112
• /
• 1988

본 연구에서는 과학계산용 병렬 컴퓨터 시스팀의 구조를 설계하고, 설계된 컴퓨터 구조의 소프트웨어 시뮬레이터를 개발하였으며, 여러가지 시뮬레이션을 통하여 시스팀의 성능을 분석하였다. 설계된 시스팀은 H/V-bus 병렬 처리 시스팀 아키텍쳐에 기반을 둔것으로 각종 과학계산을 위한 고속의 프로세서간 통신 메카니즘이 확장 설계되었다. SLAM II 및 FORTRAN을 이용하여 개발된 시뮬레이터는 시스팀 변수들을 이용하여 프로세서의 수와 속도 및 통신 메카니즘의 속도를 쉽게 변화시킬 수 있게하여 여러 조건하에서의 시스팀 성능을 분석하는데 사용되었다. 또한 실제 프로그램이 수행되는 상황에서 프로세서 및 통신 메카니즘의 속도가 시스팀 전체 성능에 미치는 영향을 측정하고 분석하기 위하여 벤치마크를 시뮬레이터를 이용하여 풀었다.

• Annual Conference of KIPS
• /
• 2020.11a
• /
• pp.1022-1024
• /
• 2020

본 논문에서는 구면 영상을 사용한 vSLAM에 의해 생성된 환경 지도에서 실내 공간을 인식하는 방법을 제안한다. 환경 지도는 오픈 소스 라이브러리 OpenVSLAM을 사용하여 생성했다. 카메라 방향과 위치를 기준으로 랜드 마크를 분류하고 허프 변환을 사용해서 실내 공간의 각 벽의 위치를 찾아냈다. 실험 결과 추정된 평면들이 실제 벽면과 유사한 위치에 나타남을 알 수 있었다. 제시하는 알고리즘은 현재의 AR 콘텐츠보다 진보된 AR 콘텐츠를 제작하는 데 사용할 수 있다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.229-231
• /
• 2018

As autonomous vehicle technology has been gradually developed, robots that have introduced autonomous navigation systems have been actively involved in areas where there is a lot of livelihoods such as industrial sites and accident sites. For this reason, the unmanned transportation system equipped with the autonomous traveling system is widely used in harmful environments where human access is difficult. In addition, the introduction of the autonomous driving system reduces the collision and casualties that occur in a mobility environment like the industrial field, and it helps the efficient work process. In addition, autonomous driving vehicles can be handled more safely and quickly in a wider area by transmitting the surrounding environment of each vehicle to a server connected to each autonomous driving vehicle and passing it through the main server. In this paper, by utilizing V2X communication for autonomous unmanned forklift system, it can increase industrial workload, reduce loss of life and damage to property through wide area forklifts.