• Journal of The Korean Astronomical Society
• /
• v.28 no.2
• /
• pp.119-137
• /
• 1995

The $UBVI_{KC}$ CCD photometry was performed in the central region(${\sim}20'{\times}20'$) of the extremely young open cluster IC1805. Member stars were selected in the (B-V)-(U-B) and (V-I)-(B-V) color-color planes. Applying recent stellar evolutionary models, we derived the age, age-spread, and initial mass function(IMF) of the cluster. IC1805 was found to be an extremely young($t_{age}{\sim}1.5Myr$) and has a flat IMF with the slope of ${\Gamma}=-1.0{\pm}0.2$.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.10
• /
• pp.899-905
• /
• 2016

Wireless access in vehicle environment (WAVE) communication is currently being researched as core wireless communication technologies for cooperative intelligent transport systems (C-ITS). WAVE consists of both vehicle to vehicle (V2V) communication, which refers to communication between vehicles, and vehicle to infrastructure (V2I) communication, which refers to the communication between vehicles and road-side stations. V2I has a longer communication range than V2V, and its communication range and reception rate are heavily influenced by various factors such as structures on the road, the density of vehicles, and topography. Therefore, domestic environments in which there are many non-lines of sight (NLOS), such as mountains and urban areas, require optimized communication channel modeling based on research of V2I propagation characteristics. In the present study, the received signal strength indicator (RSSI) was measured on both an experience road and a test road, and the large-scale characteristics of the WAVE communication were analyzed using the data collected to assess the propagation environment of the WAVE-based V2I that is actually implemented on highways. Based on the results of this analysis, this paper proposes a WAVE communication channel model for domestic public roads by deriving the parameters of a dual-slope logarithmic distance implementing a two-ray ground-reflection model.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.3
• /
• pp.487-493
• /
• 1997

Ti/sic(4H) Schottky barrier diodes were fabricated. The donor concentration and the built-in potential obtained by capacitance-voltage(C-V) measurement was about $2.0{\times}10^{15}{\textrm}{cm}^{-3}$ and 0.65 V, respectively. The ideality factor of 1.07 was obtained from the slope of current-voltage(I-V) characteristics at low current density. The breakdown field under the reverse bias voltage was about $1.7{\times}10^3V/{\textrm}{cm}$ and was very high. The barrier height of Ti for SiC(4H) was 0.91 V, which was determined by the analysis of the saturation current-temperature and the C-V characteristics.

• Journal of Korean Society of Forest Science
• /
• v.19 no.1
• /
• pp.25-31
• /
• 1973

1. According to the slope (N., S., E., and W.), some ecological studies of shrubs to the southwestern Mojave Desert were analyzed from December 10 to December 12, 1971. 2. The order of important values in studied area were as follows; Liycum andersonii, Larrea, Ephedra, Franseria, etc. 3. Important values of Lycium in the south-slope showed more than that of the other slope. It was occupied over a half of important values. 4. Vegetation are very simple and the plants appeared among 35 quadrats ($1m^2$) in tested area are found to be 10 species and number of 40 individuals. 5. The differences of flora in each facing slope have not been observed. 6. The similarity of slope plants was measured by the Importance Value Index Community Coefficient (I.V.I.C.C.). According to IVICC, each slope plants showed higher value (87%) 7. Common species of each slope appeared 7 as follows; Lycium, Larrea, Ephedra, Franseria, Eriogonum, Yucca and Aster etc.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.3
• /
• pp.123-135
• /
• 2006

In this study, in order to maximize the accuracy and efficiency of the existing interpolation method fractal methods are applied. Developed FEDISA model revives the irregularity of the real topography with only a few information about base topography, which can produce almost complete geographic information. Moreover, as a tool for examining the adaptability and efficiency of the model, index of slope range $I_{SR}$, index of surface $I_{SA}$, and index of volume $I_V$ were developed. The model area is respectively set to $75m{\times}75m$, $150m{\times}150m$, $300m{\times}300m$, $600m{\times}600m$, and $1,200m{\times}1,200m$, and then the data obtained by combining the existing interpolation methods and FEDISA model were compared with real measurements. The result of the study showed the adaptability and efficiency of FEDISA model in topography restoration.

• Korean Journal of Materials Research
• /
• v.4 no.8
• /
• pp.927-933
• /
• 1994

The effect of particle shape and size on the settling characteristics in monodisperse suspensions of non-spherical particles was investigated. The slope index n values which was obtained from the plot of logarithm of settling rate vs. voidage were increased with the decrease of particle size because different amount of liquid could be adsorbed on irregular particle shape and/or size at same volume concentration. From the experimental results, an equation, $n_{i}=n(a+b/d_{v})$ where n is value of spherical particles, dv is minimum particle diameter and a, b are constants for characteristic of particles.

• Journal of the Korean Chemical Society
• /
• v.11 no.1
• /
• pp.12-16
• /
• 1967

Fading of Chlorantine Fast Red 5B (C.I. Direct Red 81) on cotton fabric exposed to carbon are light was examined. It was observed that the dye had anomaly in CF curve slope, while normal in CFG one. Auther considered that the reason for discrepancy of the one with the other curve slope might be appeared from Weber-Fechner law, and derived following equation $F_v=[logC_0-log(C_0-C_0F_t/100)]{\times}100/(logC_0+b)$ where $F_t$; the proportion of dye faded after t hour exposure. $F_v$; the proportion of dye faded after t hour exposure, when a pattern is judged by visual method $C_0$; initial dye concentration. b; constant. also, the reason for increasing lightfastness with dye concentration was discussed on view of the above equation.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.643-648
• /
• 2014

The accelerated thermal aging of CSPE (chlorosulfonated polyethylene) was carried out for 40.41, 121.22, and 202.04 days at $100^{\circ}C$, which are equivalent to 20, 60, and 100years of aging at $50^{\circ}C$, respectively. The volume electrical resistivities of the accelerated thermally aged CSPE samples for 0, 40.41, 121.22, and 202.04 days were $1.107{\times}10^{14}-2.097{\times}10^{14}$, $7.752{\times}10^{13}-1.556{\times}10^{14}$, $7.693{\times}10^{13}-1.521{\times}10^{14}$, and $7.380{\times}10^{13}-1.304{\times}10^{14}{\Omega}{\cdot}cm$, respectively, at room temperature. The permittivities of the accelerated thermally aged CSPE samples for 0, 40.41, 121.22, and 202.04 days were $2.89{\times}10^{-11}-3.65{\times}10^{-11}$, $3.40{\times}10^{-11}-3.70{\times}10^{-11}$, $3.50{\times}10^{-11}-3.82{\times}10^{-11}$, and $3.76{\times}10^{-11}-4.13{\times}10^{-11}$ F/m, respectively, at room temperature. The EAB (elongation at break) of the accelerated thermally aged CSPE samples for 0, 40.41, 121.22, and 202.04 days were 98.8-101.3, 59.5-60.3, 37.8-39.2, and 41.8-44.3%, respectively, at room temperature. The apparent densities of the accelerated thermally aged CSPE samples for 0, 40.41, 121.22, and 202.04 days were 1.603-1.614, 1.611-1.613, 1.622-1.628, and $1.618-1.620g/cm^3$, respectively, at room temperature. The measured currents of the accelerated thermally aged CSPE and the standard sample were almost constant after 5 min of applying a 300-V/mm electric field to the CSPE. The V-I slope of the accelerated thermally aged CSPE sample was increased if the applied electric field was increased at room temperature, and the V-I slope of the accelerated thermally aged CSPE was higher than that of standard CSPE.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.6
• /
• pp.229-235
• /
• 2002

This paper presents the fabrication of polycrystalline thin film transistor(TFT) using sequential lateral solidification(SLS) of amorphous silicon. The fabricated SLS TFT showed high Performance suitable for active matrix liquid crystal display(AMLCD). The SLS process involves (1) a complete melting of selected area via irradiation through a patterned mask, and (2) a precisely controlled pulse translation of the sample with respect to the mask over a distance shorter than the super lateral growth(SLG) distance so that lateral growth extended over a number of iterative steps. The SLS experiment was performed with 550$\AA$ a-Si using 308nm XeCl laser having $2\mu\textrm{m}$ width. Irradiated laser energy density is 310mJ/$\textrm{cm}^2$ and pulse duration time was 25ns. The translation distance was 0.6$\mu$m/pulse, 0.8$\mu$m/pulse respectively. As a result, a directly solidified grain was obtained. Thin film transistors (TFTs) were fabricated on the poly-Si film made by SLS process. The characteristics of fabricated SLS p -type poly-Si TFT device with 2$\mu\textrm{m}$ channel width and 2$\mu\textrm{m}$ channel length showed the mobility of 115.5$\textrm{cm}^2$/V.s, the threshold voltage of -1.78V, subthreshold slope of 0.29V/dec, $I_{off}$ current of 7$\times$10$^{-l4}$A at $V_{DS}$ =-0.1V and $I_{on}$ / $I_{off}$ ratio of 2.4$\times$10$^{7}$ at $V_{DS}$ =-0.1V. As a result, SLS TFT showed superior characteristics to conventional poly-Si TFTs with identical geometry.y.y.y.

• Korean Journal of Environment and Ecology
• /
• v.9 no.2
• /
• pp.133-146
• /
• 1996

This study was conducted to analyse plant community structure by the altityed and slope in Tongdaesan area, Odaesan National Park. Sixty-three plots(each plots size was 100m$^{2}$) were set up and PWINSPAN and DCA method were used for vegetational structure analysis. Division of community was cleared altitude than part of slope With increasing elevation the importance values of Quercus mongolica, Tilia amurensis increased, while those of Fraxinus mandshurica, Betula schmidtii, Cornus controversa decreased. Survey plots were divided into 6 groups by the TWINSPAN and DCA method. The divided groups are T. amurensis community(I), Q. mongolica community(II) of upper part of slope of east and west, Q. mongolica-T. amurensis community(III) of middle part of slope, Q. mongolica-F. mandshurica community(IV), Pinus densiflora-B. schmidtii-Carpinus laxiflora community(V) of low elevation of east, F. mandshurica-C. controversa community(VI)of low elevation of west. Also, vegetational change were showed slope of east and west in Tongdaesan except top area for the last twenty yeras.